Tenda W54A Manuel utilisateur

W54A 54M Wireless AP User Guide

is the registered trademark of Shenzhen

Tenda Technology Co., Ltd. All the products and product

names mentioned herein are the trademarks or register-

ed trademarks of their respective holders. Copyright of

the whole product as integration, including its accessories

and software, belongs to Shenzhen Tenda Technology Co.,

Ltd. Without the permission of Shenzhen Tenda

Technology Co., Ltd, any individual or party is not allowed

to copy, plagiarize, imitate or translate it into other

languages.

All the photos and product specifications mentioned in

this guide are for references only. As the upgrade of

software and hardware, there will be changes. And if

there are changes, Tenda is not responsible for informing

in advance. If you want to know more about our product

information, please visit our website at www.tenda.cn.

W54A 54M Wireless AP User Guide

Contents

Chapter 1 Introdution----------------------------------------------1

1.1 Product Features ........................................................ 1

1.2 Package contents ....................................................... 2

Chapter 2 Hardware Installation------------------------------------3

Chapter 3 Configuration---------------------------------------------5

3.1 Log in....................................................................... 5

3.2 Wizard...................................................................... 6

3.3 Status....................................................................... 9

3.4 LAN Setting..............................................................11

Chapter 4 Radio Setting------------------------------------------- 12

4.1 Basic Setting ............................................................12

4.2 Mode Setting ............................................................13

4.3 Access Filter .............................................................23

Chapter 5 System Tools ------------------------------------------- 25

5.1 Change Password ......................................................25

5.2 Firmware Upgrade .....................................................25

5.3 Reboot.....................................................................27

5.4 Restore Factory Default ..............................................27

5.5 Restore/Backup Setting..............................................28

5.6 Exit .........................................................................28

5.7 Help ........................................................................29

Appendix I: Glossary ---------------------------------------------- 30

Appendix II: TCP/IP Address Setting (Take Winxp as example) 33

W54A 54M Wireless AP User Guide

Chapter 1 Introdution

W54A is fully compliant with IEEE802.11g/b standards. It can help

you extend from the wired network to the wireless network, free

from the cabling troubles. It is the best choice for SOHO and small

enterprise users. W54A provides five work modes: AP, WDS P2P

Bridge, WDS P2MP Bridge, WDS AP Bridge and Client. It also

supports 64/128-bit WEP, WPA, TKIP, AES, WPA2, WPA&WPA2

encryptions and security mechanism. The MAC address filter can

protect your network against any malicious intrusion. Moreover, the

Web management utility can benefit you to manage the device

easily.

1.1 Product Features

¾Supports IEEE 802.11g, IEEE 802.11b standards

¾Supports five connection modes: AP, WDS P2P Bridge, WDS

P2MP Bridge, WDS AP Bridge and Client

¾Provides up to 54M transmission rate and 54/48/36

/24/18/12/9/6M or 11/5.5/2/1M Auto-Negotiation rate

selection

¾Supports one 10/100M Auto-Negotiation Ethernet port

¾Supports 150 meters indoors and 400 meters outdoors

(depends on the environments around)

W54A 54M Wireless AP User Guide

¾Supports Web management utility and easy Setup Wizard

¾Supports 64/128-bit WEP data encryption

¾Supports WPA, TKIP, AES, WPA2, WPA&WPA2 encryptions and

security mechanism

¾Supports IEEE802.11b/IEEE802.11g Auto-negotiation and

manual configuration modes

¾Supports Auto MDI/MDIX

¾Supports Firefox1.0，IE5.5 or above

¾Supports authorization access over thirty-two MAC addresses

¾Supports auto wireless channel selection

¾Provides detachable antenna

1.2 Package contents

One W54AWirelessAP

One Power Adapter

One Quick InstallationGuide

One CD-ROM

W54A 54M Wireless AP User Guide

Chapter 2 Hardware Installation

This chapter explains how to connect the Access Point (take the AP

mode installation as example, other installation modes please refer

to the Quick Installation Guide). The detailed processes are shown

as below:

1. Connect one end of the network cable to your Ethernet

broadband router, switch or PC, and the other end to the

W54A’s LAN port.

2. Connect the power adapter to the AP’s Power port. Then plug

the power adapter into an electrical outlet. The LEDs on the

front panel will light up as soon as the AP’s powers on.

Then, connect wireless adapter to the AP via wireless signal.

Please refer to the topology below:

W54A 54M Wireless AP User Guide

The topology plan of AP mode connection

W54A 54M Wireless AP User Guide

Chapter 3 Configuration

Now that you’ve connected the AP to your wired network, you are

ready to begin setting it up. This chapter will take you through all

the steps necessary to configure your AP.

3.1 Log in

Launch Internet Explorer or Netscape Navigator. In the address bar,

enter the AP’s default IP address, 192.168.0.254. Press Enter key

and the login screen will appear. Before doing this, you need set

192.168.0.x(x ranges 1-253) as your PC’s IP address, and

255.255.255.0 as your subnet mask. (Please refer to the Appendix

II for the detail of TCP/IP setting)

Enter admin in both the user name and password field. When this

is your first time to open the Web-based management interface,

you can set a new password from the System Tool – Change

password tab.

W54A 54M Wireless AP User Guide

Click Ok; the welcome screen will appear;

Click Next and Wizard screen will appear. On the screen, there are

five different operating modes including W54A—AP, WDS P2P

Bridge, WDS P2MP Bridge, WDS AP Repeater and the client. The

specific setting for each mode will be showed below.

3.2 Wizard

W54A 54M Wireless AP User Guide

If the wizard page hasn’t appeared, you can also click the wizard

tab on the left to active.

For different requirements, you can select one of the suitable

operating modes. Here, we’ll take AP mode as example to introduce

the settings method.

Select AP mode and click Next.

This page will require you to enter the SSID, Channel settings for

your wireless network.

SSID: The name of your wireless network. The default value is

“Tenda”.

Channel: Select the operating frequency for your wireless

network.

Click the Next button to continue or the Back button to return to

Autres manuels pour W54A

Table des matières

Autres manuels Tenda Point d'accès sans fil

Manuels Point d'accès sans fil populaires d'autres marques

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuel utilisateur

Ubiquiti

Ubiquiti NanoStation NSM2 Manuel utilisateur

Cisco

Cisco Aironet 1550 Series Manuel utilisateur

Aruba

Aruba IAP-335 Manuel utilisateur

Advantek Networks

Advantek Networks AWN-AP-54MR Manuel utilisateur

IP-COM

IP-COM AP355 Manuel utilisateur

Buffalo

Buffalo AirStation WLA-L11G Manuel utilisateur

EnGenius

EnGenius EnStationACv2 Manuel utilisateur

D-Link

D-Link DAP-3662 Manuel utilisateur

xG Technology

xG Technology xMax CN1300 Manuel utilisateur

Widelink

Widelink ezWave WAP-1100 Series Manuel utilisateur

Edimax

Edimax CAP1200 Manuel utilisateur

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuel utilisateur

Aruba

Aruba AP-203R Manuel utilisateur

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuel utilisateur

CreatComm

CreatComm TB5F Manuel utilisateur

SineDigital

SineDigital MW-1500AP(H) Manuel utilisateur

TP-Link

TP-Link AP9650 V1 Manuel utilisateur