TEMPERED Airwall 110 Series Manuel utilisateur

Place the Airwall where it can reach the Conductor on your shared network. The

fastest method is to connect the Airwall via the console port:

For the latest info,

see Airwall help:

Once the Airwall is connected to the Conductor, you can man-

age and congure it there (including serial ports). For alternate

methods of provisioning the Airwall or installing the console

port driver, go to Airwall help at https://webhelp.tempered.io/

webhelp/.

Airwall – 110

Manual Quick Start

Plug in the Airwall – Locate the Airwall in an area that

complies with its safe operating guidelines, then plug it

in or apply power.

Connect to your network – Plug in to your network

using port 1.

Connect a computer to the Airwall – Plug in using the

micro USB console port located on the bottom.

- Using a terminal (macOS, Linux) or terminal

emulator (Windows), connect to the Airwall

using baud rate 115200.

- At the login prompt, log in with:

name: airsh, password: airsh.

- Set the Conductor IP address, or URL and port

(optional). For example:

conductor set my-conductor.tempered.com

Ping the Conductor URL –

ping my-conductor.tempered.com

Connect to devices – Connect the devices you want to

protect to the Airwall on Port 2.

The Airwall should now be recognized in the Conductor,

showing up on the Licensing tab, or on the Airwalls page as

ready to manage.

Airwall™ -110 Series DOC-0079 EN Revised: May 6, 2020 QUICK START GUIDE

Place the Airwall where it can reach the Conductor on your shared network. Once

you set up DHCP on your network, you can skip steps 2 and 3 when setting up

any additional Airwalls.

For the latest info,

see Airwall help:

Airwall – 110

DHCP Quick Start

Plug in the Airwall –Locate the Airwall in an area that

complies with its safe operating guidelines, then plug it in

or apply power.

Check DHCP – Ensure there is a DHCP server and a DNS

resolver or DNS server for the local domain accessible

from the shared network.

Create a DNS SRV record – On the DNS server, add a

SRV record pointing to the Conductor URL:

_service._proto.name TTL class SRV priority

weight port target

For example, if your shared network domain is

example.com and the Conductor hostname is cond-01,

then the SRV record should be:

_ifmap._tcp.example.com. 3600 IN SRV 10 0

8096 cond-01.example.com

*Use the TTL, priority and weight for your DNS environ-

ment. Port 8096 is the default, but you can change it in

the Conductor and set it to an alternate port.

Connect to your network – Connect the Airwall to your

network using Port 1. The DHCP server assigns an IP ad-

dress, netmask, and a default gateway to the Airwall. The

Airwall then does a DNS lookup and congures itself using

the Conductor address.

Connect to devices – Connect the devices you want to

protect to the Airwall on Port 2.

Once the Airwall is connected to the Conductor, you can man-

age and congure it there (including serial ports). For alternate

methods of provisioning the Airwall or installing the console

port driver, go to Airwall help at https://webhelp.tempered.io/

webhelp/.

The Airwall should now be recognized in the Conductor,

showing up on the Licensing tab, or on the Airwalls page as

ready to manage.

Airwall™ -110 Series DOC-0079 EN Revised: May 6, 2020 QUICK START GUIDE

Part Number Model Cellular Eth Ports Serial Ports

PLF-0138-01 Airwall 110e No 2 2

PLF-0140-01 Airwall 110g Yes 2 2

The Airwall 110 platforms are small form factor indus-

trial security appliances that facilitate private overlay

networks between customer-provided equipment and

devices. This document contains important operating

information, specications, and installation instructions.

MODELS

[email protected]

+1 206.452.5500 ext. 2

www.tempered.io

3101 Western Ave., Ste. 550

Seattle, WA 98121

Airwall 110e and Airwall 110g

Platform Guide

1. Multi-purpose button

2. LED - Signal indicators:

- Status

- Power

- Cellular connection status

- SIM card

- MAP connection (Conductor)

- Diagnostic mode

3. Ethernet ports

4. Serial ports

5. Antenna connectors

6. Power input connector

7. SIM card slot

8. Relay

9. Micro-USB console port

Security Appliance

–

Front Top Bottom

PANEL LAYOUTS

Airwall™ -110 Series DOC-0078 EN Revised: May 6, 2020 PLATFORM GUIDE

Specications

Airwall 110 Series

Ethernet Ports 2 x 10/100 Mbps RJ-45 ports, auto MDI/MDIX

Console Port 1 x micro USB

Controls 1 x multi-purpose button (actuated with pin)

Indicators 1x Power

1x Status

1x Map / Conductor

1x Diagnostic mode

1x Cellular Link (110g)

1x SIM card (110g)

Relay Voltage: 220V DC/250V AC, Max current 2.0A

DC Power Input DC 9-48V, 0.55A-0.1A

Over-voltage protection

Reverse-polarity protection

Storage Temp range -45° to 85° C (-49° to 185° F)

Operating Temp range -40° to 70° C (-40° to 158° F)

Operating humidity 5% to 95% (non-condensing)

Dimensions 31mm W x 100mm D x 125mm H

1.22in W x 3.94in D x 4.92in H

Mounting DIN-rail, desk-mount

Weight 290g (10.23 oz)

Serial Interfaces

Protocols RS-232, RS-485, RS-422

Connector 2 x DE-9M

Airwall™ -110 Series DOC-0078 EN Revised: May 6, 2020 PLATFORM GUIDE

Cellular Connectivity (110g)

SIM card 1x micro (3FF) Push-Push SIM card slot

3G DC-HSDPA Category 24. 42mbps DL max

HSUPA Category 5. 5.76Mbps UL max

24dBm+1dB/-3dB maximum transmit power

4G LTE Category 4: 1.4 – 20MHz bandwidth

FDD 150mbps DL, 50mbps UL max

TDD 130mbps DL, 30mbps UL max

23dBm±2dB maximum transmit power

3G bands WCDMA B1, B2, B4, B5, B6, B8, B19

4G LTE FDD bands B1, B2, B3, B4, B5, B7, B8, B12, B13, B18, B19,

B20, B25, B26, B28

4G LTE TDD bands B38, B39, B40, B41

Specications (continued-pg 2)

Regulatory approvals

Global IECEE CB Scheme safety

European Union LVD, EMCD, RoHS, REACH, WEEE

RED (110g)

United States FCC Part 15B Class A, cULus, FCC Radio

Canada ICES-03 Class A, cULus, ISED/IC Radio

Japan VCCI, JATE (110g), TELEC (110g)

Australia ACMA TLN 2015, RLN 2014, EMR LN 2014 (110g)

ACMA EMC LN 2017 (110e, 110g)

New Zealand Radio Standards Notice 2020 (110g)

EMC Standards Notice 2019

Airwall™ -110 Series DOC-0078 EN Revised: May 6, 2020 PLATFORM GUIDE

Band Uplink Freq

(MHz)

USA Canada Japan

LTE B12 699 – 716 8.70 7.76 N/A

LTE B28 703 – 748 N/A N/A 3.00

LTE B13 777 – 787 9.16 8.09 N/A

LTE B5, B19, B20, B26,

B18, WCDMA VI

814 – 849 9.36 8.25 3.00

LTE B8 880 – 915 N/A N/A 3.00

LTE B3, B4 1710 – 1785 5.00 5.00 3.00

LTE B2, B25, B39 1850 – 1920 8.00 8.00 N/A

LTE B1 1920 – 1980 N/A N/A 3.00

LTE B7, B38, B41 2496 – 2690 8.00 8.00 3.00

Maximum approved antenna gain (dBi, peak)

WALL-HW-110e

WALL-HW-110g

included with above:

USB A to micro USB cable

Micro SIM card slot door

2x Antennas-ACC-HW-ANT-LTE-5

(ACC-HW-ANT-LTE-3 in Japan)

1x 3 pin power connector

1x 2 pin relay connector

DIN rail mounting kit

Power Supply:

ACC-HW-110-PSU-25W

AC Power cables:

ACC-HW-PWR-C13-NA, (North America)

ACC-HW-PWR-C13-JP, (Japan)

ACC-HW-PWR-C13-AU, (Australia / New

Zealand)

ACC-HW-PWR-C13-UK, (UK, Singapore,

Malaysia)

Parts List

Hereby, Tempered Networks, Inc declares that the radio equipment type Airwall

110g is in compliance with the Directive 2014/53/EU. The full text of the EU dec-

laration of conformity is available at the following internet address: https://repo.

tempered.io/DoC/110.

The Airwall-110e and Airwall-110g can be used in all EU Member States.

Airwall™ -110 Series DOC-0078 EN Revised: May 6, 2020 PLATFORM GUIDE

This device complies with Industry Canada’s license-exempt RSSs. Operation is

subject to the following two conditions: (1) This device may not cause interference;

and (2) This device must accept any interference, including interference that may

cause undesired operation of the device.

Radiation Exposure

This equipment complies with FCC and ISED radiation exposure limits set forth for an

uncontrolled environment. This equipment should be installed and operated with mini-

mum distance of 20cm between the radiator and your body and must not be co-located

or operating in conjunction with any other antenna or transmitter.

If this device is installed with an antenna other than the type included with it, you must

select an antenna and cabling system that respects the maximum antenna gain listed

in the tables. If your selected antenna does not meet these criteria, you may void your

legal authority to operate this equipment.

Status LED Codes

Normal

Operation

On Steady No Conductor

Connection

O O O O = = O O = =

Conductor

Blink

O O = = System Error O O O O = = O O O = =

Missing

Identity

O O O = = O = = Secure Network

Error

O O O O = = =

Factory

Reset

O O = = O = = No Shared Network O O O O = = O = =

Diagnostic

Mode

O = O =

(fast blink)

Firmware

Download

O O O = = O O = =

Firmware Update O O O = = =

Airwall™ -110 Series DOC-0078 EN Revised: May 6, 2020 PLATFORM GUIDE

Wiring

Power Inputs

This device supports one power supply. The

connector for PWR 1 is located on the termi-

nal block on the top of the unit.

Step 1: Insert the negative DC into the V- ter-

minal and the positive DC into the V+ terminal.

Step 2: To keep the DC wires from pulling

loose, use a small at-blade screwdriver to

tighten the wire-damp screws in the front of

the terminal block connector.

Serial Connector

Pin # RS-232 RS-422 RS-485

1 TX- Data-

2 RxD TX+ Data+

3 TxD RX+

4 RX-

5 GND GND GND

7RTS

8 CTS

This device also has a normally-open relay contact that is connected when the

device is fully functional and has underlay connectivity. The relay disconnects

when communication via this device is not possible. Connect your custom circuitry

bearing in mind the following maximum ratings:

• Voltage: 220 VDC /240 VAC, Max current 2.0A

Fault Relay

V+ V-

SIM Card Orientation

Insert the SIM card with the cut

corner up, as shown in the picture

on the right.

Wrong Correct



Airwall™ -110 Series DOC-0078 EN Revised: May 6, 2020 PLATFORM GUIDE

Multi-Purpose Button

Also called the Reset button, the multi-purpose button provides two different func-

tions, depending on how long it is pressed and held.

Short Press Press for 5 seconds and release. The Status

LED will blink steadily.

Places the Airwall

in diagnostic mode.

Long Press Press for at least 8 seconds and release.

The Status LED will blink in a 2 ash, 1 ash

pattern.

Resets the Airwall

to factory defaults.

NOTE: To exit diagnostic mode, select Reboot in the diagnostic interface or turn it

off and back on again.

Safety and Warnings

Elevated Operating Ambient: If installed in a closed environment, make sure the

operating ambient temperature is compatible with the maximum ambient tempera-

ture specied by the manufacturer.

Reduced Air Flow: Make sure the amount of air ow required for safe operation of the

equipment is not compromised during installation.

Mechanical Loading: Make sure the mounting of the equipment is not in a hazardous

condition due to uneven mechanical loading.

Circuit Overloading: Consideration should be given to the connection of the equipment to

the supply circuit and the effect that overloading of the circuits might have on over-current

protection and supply wiring. Appropriate consideration of equipment nameplate ratings

should be used when addressing this concern.

Note: This equipment has been tested and found to comply with the limits for a Class

A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the in-

struction manual, may cause harmful interference to radio communications. Operation

of this equipment in a residential area is likely to cause harmful interference in which

case the user will be required to correct the interference at his own expense.

Airwall™ -110 Series DOC-0078 EN Revised: May 6, 2020 PLATFORM GUIDE

Troubleshooting

If an Airwall is online, you can use the Conductor to download a packet capture le,

a diagnostic report, or a support bundle for troubleshooting. Log in to the Conduc-

tor with a system administrator or network administrator account, then go to the

Airwall’s Diagnostics page: Select Airwalls, choose the one you want from the list,

then click Diagnostics.

Start a packet capture to troubleshoot networking issues:

1. On the Airwall’s Diagnostics page, begin a packet capture by clicking Start

Packet Capture.

2. Stop the packet capture by clicking Stop Packet Capture.

You will receive a download link once the Conductor has nished creating the

packet capture .pcap le. View the .pcap le using any packet-capture and proto-

col-analysis tool, such as Wireshark.

Create a diagnostic report to check Airwall health:

1. On the Airwall’s Diagnostics page, you can put it into diagnostic mode and

download a diagnostics report. If the Airwall is oine, you can put it in Diagnostics

mode to download the report.

2. Create your report by clicking Request a diagnostic report.

You will receive a download link once the Conductor has nished creating the

report .txt le. Review the diagnostic report for a high-level look at the overall health

of the Airwall.

Create a support bundle for Tempered Support:

A support bundle .pkg le is an encrypted archive that facilitates technical support

by Tempered.

1. On the Airwall’s Diagnostics page, you can put it into diagnostic mode and

download a support bundle. If the Airwall is oine, you can put it in Diagnostics

mode to download the support bundle.

2. Create a support bundle by clicking Request a support bundle.

3. When the support bundle .pkg le is ready, download the le and send it as an

email attachment to [email protected].

Airwall™ -110 Series DOC-0078 EN Revised: May 6, 2020 PLATFORM GUIDE

Table des matières

Manuels Système de sécurité populaires d'autres marques

Inner Range

Inner Range Concept 2000 Manuel utilisateur

Climax

Climax Mobile Lite R32 Instructions de montage

CADDX

CADDX NX-6 Manuel utilisateur

FBII

FBII XL-31 Series Manuel utilisateur

Johnson Controls

Johnson Controls PENN Connected PC10 Manuel utilisateur

Aeotec

Aeotec Siren Gen5 Manuel utilisateur

Blaupunkt

Blaupunkt SA 2700 Manuel utilisateur

IDEAL

IDEAL Accenta Manuel du propriétaire

AJAX

AJAX DoubleButton Manuel utilisateur

Swann

Swann SW-P-MC2 Manuel utilisateur

Ecolink

Ecolink Siren+Chime Manuel utilisateur

Digital Monitoring Products

Digital Monitoring Products XR150 Manuel utilisateur

EDM

EDM Solution 6+6 Wireless-AE Manuel utilisateur

Highway Safety Group

Highway Safety Group EA401 Manuel utilisateur

Siren

Siren LED GSM Manuel utilisateur

Detection Systems

Detection Systems 7090i Instructions de montage

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuel utilisateur

Siemens

Siemens FDM273 Manuel utilisateur