Tely ACE Manuel utilisateur
TELY ACE ANR Headset User Guide
1
ACE ANR Headset
User Guide
TELY ACE ANR Headset User Guide
2
Welcome and Congratulations!
The “ACE” Active Noise Reduction (ANR) Headset System provides you with a
complete set of components for the most effective noise reduction, a 5 year warranty
and features including:
Extremely light weight over-the-ear headset & rotating microphone.
State-of-the-art active noise cancelling.
Cabling and adapters for fixed-wing and helicopter applications.
Power source options including AA batteries, LEMO or USB-C.
Multiple audio features and controls with Bluetooth®connectivity.
Case with spare batteries and flashlight.
TELY ACE ANR Headset User Guide
3
Contents
Introduction …………………………..……..4
Getting Started with Your ACE Headset..5
Adjusting the Headset……………….…5
Adjusting the Microphone………..……5
Using the ANR Controller Features…...…6
Power Options………….…………..…..6
Power Control…………………......……7
Audio Control…………………..……….8
Using the Bluetooth Wireless Features 10
Connecting the Controller………..…..10
Cell Phone Use……………………..…11
Bluetooth®Volume…………… …….12
Bluetooth®and AUX Priority……..….12
Bluetooth®Indicator…………………..13
Auto-Off Function……………….…….13
Mono-Stereo Switch………………..…14
Performance Tips and ……………………15
Registration………………………………...17
Replacement Accessories……………….18
Specifications……………………….……..19
Trouble Shooting Tips……………………19
TELY Technologies Contact Info……….21
Warranty……………………………….…....21
FCC Compliance………………………..…23
Copyright Acknowledgements…….……23
TELY ACE ANR Headset User Guide
4
Introduction
Your ACE ANR Headset System comes
complete with the following components:
ACE ANR Headset and Controller
LEMO to Helicopter Plug Adapter
LEMO to General Aviation Dual Plugs
USB-C to USB Power Cable
Audio Device cable with 3.5mm Connectors
Sheepskin Headpad Cover
Carrying Case
Two AA Batteries
Small White/Red Flashlight with AA Battery
TELY ACE ANR Headset User Guide
5
Getting Started with Your ACE Headset
Adjusting the Headset
(1) The headset may be used with the microphone
on either the right side or the left side. The
microphone is moved around the ear cup by
swinging it down and around to the other side.
(2) To adjust the headset for head size, grasp the
adjustment rods on either side and pull them out
or push them into the plastic cylinders
supporting each rod.
Adjusting the Microphone
After the headset is comfortably placed on, the microphone should be moved close to but not
touching the mouth.
2
1
TELY ACE ANR Headset User Guide
6
Using the ANR Controller Features
Power Options
1. With no power to the controller, the
headset will provide passive noise
reduction. No additional features will be
available.
2. Two AA alkaline batteries can provide 15
to 20 hours of service but less depending
on the time during which both ANR and
Bluetooth® are active.
TELY ACE ANR Headset User Guide
7
3. Observe the polarity markings. Do not
store batteries in the controller because
of potential leakage. Do not use
rechargeable batteries as power is
insufficient.
4. A USB-C port (10) on the controller side
can accept power from a USB charging
source accepting 5 to 28 VDC.
5.When using the LEMO connection,
power is supplied via the airframe panel
connector. Battery power will not be
used.
Power Control
1. Power is turned on by pressing the
Power Button (4) for 1 second. The
Status light will slowly flash green. If the
Power Button is held too long the
controller will turn off with two red
flashes.
2. Power is turned off by pressing the
Power Button (4) until the Status Light
(3) flashes 3 times. The power is then
off.
TELY ACE ANR Headset User Guide
8
3. Power status is displayed via the Status
Light (3). Green: Power available is
over 10%. Orange: less than 10%. Red:
Controller will be turned off shortly.
4. The Status Light (3) also shows the
power source. Flashing green indicates
internal battery use. Solid green
indicates power from the USB or LEMO
connection.
Audio Control
The controller accepts audio from three
sources:
1. Audio volume from the radio and
intercom is controlled via the left (1) and
right (2) speaker volume roller buttons.
2. An auxiliary external audio source such
as a music device may be connected
via the 3.5mm audio input (11). Volume
adjustment is done at the audio source.
TELY ACE ANR Headset User Guide
9
3. Audio from a Bluetooth® connected
source such as a cell phone may be
connected using the Bluetooth® control
Phone button (6) . Bluetooth®
channel status is indicated via the
Status light (5). Bluetooth® volume can
be independently controlled using the
(+) (8) and (-) (9) buttons and the audio
source volume control.
4. Audio channel priority is chosen using
the 3-position Audio Priority switch (7).
The selections are described in a later
section.
TELY ACE ANR Headset User Guide
10
Using the Bluetooth® Wireless Features
Connecting the Controller
After power has been turned on the
Bluetooth® connection to an external device
may be activated by holding the Phone
button (6) for more than 1 second. Then the
controller will attempt to connect to the
device which must be enabled. Select “BT-
ANR”. If a code is required use 0000.
The Bluetooth® feature of the controller will
first automatically attempt to connect to the
last device it was connected to. If that fails in
3 seconds it will look for another device.
If a Bluetooth® connection was made to the
last device but you want a connection to a
different device, temporarily turn off the last
devices Bluetooth® feature while you
connect to the desired device.
To turn off the Bluetooth® feature, hold the
Phone button (6) for more than 1 second.
Table des matières
Autres manuels Tely casque
