Teltonika TMP-102 Manuel utilisateur
TELTONIKA T-ModemPCI (TMP-102)
User Manual V1.0
2
Contents
Introduction..............................................................................................................................................3
1. Package contents .................................................................................................................................4
2. Technical specifications......................................................................................................................5
2.1. Data transferring..........................................................................................................................5
2.2. Mechanical specifications ...........................................................................................................5
2.3. Electrical and operating specifications .....................................................................................6
2.4. Indication ......................................................................................................................................7
3. Modem instalation and setup.............................................................................................................8
3.1. Connecting to PC ........................................................................................................................8
3.2. Installing of Modem driver ........................................................................................................8
3.3. Installation of “T-Modem Control Tool”..............................................................................10
3.4. Changing of security setting.....................................................................................................11
3.5. Controlling of Server.................................................................................................................11
3.6. Getting connected to the Internet...........................................................................................15
3.7. Internet connection settings.....................................................................................................16
4. TechniCAL SUPPORT ....................................................................................................................18
3
INTRODUCTION
In this document you will find a detailed description how to install and to use the “T-
ModemPCI” modem as well as software to operate it.
“T-ModemPCI” device is a modem for data transfer via GSM network. The Modem is designed
to be mounted into motherboard of a PC. Once the device is mounted to the motherboard you can
access the Internet using a GSM channel for data transferring. “T-ModemPCI” supports the following
data transfer channels: EDGE, GPRS, CSD, HSCSD, SMS. The device can function as a “watchdog”
timer, watching over the PC temperature and van velocity.
4
1. PACKAGE CONTENTS
‘T-ModemPCI” is supplied to clients in carton with all contents, which are needed for
connection to PC and normal work:
1) Carton,
2) “T-ModemPCI” modem,
3) A CD with User’s Guide and drivers,
4) An external GSM antenna (just upon special orders of customers),
Notice: the producer does not provide a SIM card among other items of a package, which is necessary
for connection to GSM Network! You can obtain a SIM card from your local GSM service provider!
If any of the components is missing please contact your local distributor.
5
2. TECHNICAL SPECIFICATIONS
2.1. Data transferring
“T-ModemPCI” supports all bearers of GSM Network. Which data channel is used
depends on GSM operator and data transfer capacity in the chosen GSM Network.
•EDGE 2 class (up to 118,4 kbps),
•GPRS 6 class (up to 56-114 kbps),
•HSCSD (up to 43.2 kbps),
•CSD (up to 14,4 kbps),
•SMS textual messages.
2.2. Mechanical specifications
“T-ModemPCI” modem is a board, which is mounted into motherboard of a PC. The modem
is connected to the motherboard using a PCI connector. External dimensions and measures of the unit
are shown in picture 1.
1 pict. An external look and measures of the modem
6
2.3. Electrical and operating specifications
The MODEM is supplied from Motherboard’s PCI connector of a PC. The supply voltage is
+5V. A PC to which the “T-ModemPCI” modem is going to be connected must have PCI interface.
Electrical parameters of the device are shown in Table 1.
Table 1. Device specifications
Parameter Min Typical Max Measr.
Units
Power supply Voltage +5 +5 V
Average Power consumption 2 W
Maximum Power consumption 1 10 W
1Does not last more than 1.2 ms
The operating conditions and other characteristics are shown in Table 2.
Table 2. Operating conditions and other data.
Parameter Min Nominal Max Measr.
Units
Weight 100±5 g
Recommended operating
temperature
+15 +35 ºC
Marginal operating
temperature
-25 +25 ºC
Storage temperature -40 +85 ºC
Notice: if the settings outreach the characteristics given above the device can be damaged!
7
2.4. Indication
“T-ModemPCI” has 2 LEDs for indication. They are located at the top part of the device. Due
to these indicating LEDs we can determine in which mode is the device operating, are there any
shortcuts in its functionality or not. The indication status of the modem is given in the Table 3.
Table 3. Modem status description.
“Power” is on Power supply is connected.
“Status” is green and blinking Modem is powering up
“Status” is green The device is ready to use
“Status” is yellow and blinking No SIM card inside, no PIN code entered
or any possibility to connect to the GSM
Network
“Status” is yellow The device has successfully connected to
the Network for data transfer
8
3. MODEM INSTALATION AND SETUP
3.1. Connecting to PC
1) Turn Off your PC;
2) Insert SIM card into the mode. Follow the instructions on the device sticker. Make sure, the
SIM card is pushed inside till it fixes;
3) Mount the “T-ModemPCI” modem into the Motherboard of a PC;
4) Connect an external GSM antenna to the “T-ModemPCI” board;
5) Turn on the PC.
3.2. Installing of Modem driver
1) Turn your PC on and wait until the OS boots;
2) Insert a CD supplied in the carton package
into CD ROM;
1. “Windows XP” OS will automatically detect a
new device “PCI Simple Communications
Controller”. “Found New Hardware Wizard”
dialog box will appear. In the opened dialog box,
select “No, not this time” and press “Next” button;
2. “Found New Hardware Wizard” dialog box will
appear. In the opened dialog box, select „Install
from a list or specific location (Advanced)“ and
press “Next” button;
3. “Found New Hardware Wizard” dialog box will
appear. In the opened dialog box, select “Include
this location in the search” and press “Next”
button;
4. “Hardware Installation” dialog box will appear.
Stating that there has been performed any “Windows
Logo” testing to the driver select “Continue
Anyway”;
9
5. “Found New Hardware Wizard” dialog box will
appear. A successful „NetMos 9835 PCI Multi-I/O
Controller” installation message will appear;
6. Further in the same way install a parallel port
(“NetMos PCI ECP Parallel Port”) and two serial ports
(“NetMos PCI Serial Port”);
7. Once the ports have been installed, a “Hardware Update Wizard” dialog box will appear. Select
“No, not this time” and click “Next”;
8. “Hardware Update Wizard” dialog box will appear. In the opened dialog box, select „Install from a
list or specific location (Advanced)“ and press „Next“ button. “T-ModemPCI modem installation will
begin;
9. After completing the “Found New Hardware Wizard” click “Finish”;
10
Windows 2000 OS: Make Windows XP installation steps (1 – 9)
3.3. Installation of “T-Modem Control Tool”
1.The installation program should start
automatically. If it is not the case, so find a catalogue
“Software” in the CD and start “setup.exe” file. The
first “T-Modem Setup” dialog box will be opened;
2.Press “Next” button in the opened box. A second
“T-Modem Setup” dialog box will appear;
3. You can select a preferable driver
installation way in the dialog box. When
“Typical” installation is chosen, a standard driver
will be installed. When “Custom” installation is
chosen, you can install separate driver
components and show the driver installation
folder. When “Complete” installation is selected,
a complete driver installation will take place. It is
recommended to select a “Custom” installation.
The third “T-Modem Setup” dialog box will be
opened;
4. “T-Modem Setup” dialog box will appear. Press
“Next” in the opened dialog box;
5. “T-Modem Setup” dialog box will appear.
Press
“Install” in the opened dialog;
6.“T-Modem Setup” dialog box will appear. Enter
dial-up settings in the ialog box. The dial-up
settings are automatically read from a “*ini” file on
d
the CD. Should the parameter fields appear empty
the user has to fill in them by him self. He can
obtain the dial-up settings by his GSM operator.
The settings being filled in the “Next” button must
be clicked;
Table des matières
Manuels Carte PCI populaires d'autres marques
Belkin
Belkin F5D7000F Manuel utilisateur
Pericom
Pericom PI7C7100 Manuel utilisateur
ADLINK Technology
ADLINK Technology cPCI-3548 Manuel utilisateur
Digium
Digium TE200 Series Manuel utilisateur
Allo.com
Allo.com 2nd Gen E1/T1/J1 Manuel utilisateur
Western Digital
Western Digital FireWire PCI Adapter Manuel utilisateur