Teltonika FMB208 Guide d'installation

Quick Manual

v1.0

Waterproof tracker for Indian

market

FMB208

 
2 
FMB208 | Wiki 
Table of Contents 
Know your device..................................................................................3 
Pinout ........................................................................................................................ 4 
Wiring scheme ....................................................................................................... 5 
Set up your device.................................................................................6 
How to insert Micro-SIM card and connect the battery......................... 6 
PC Connection (Windows) ................................................................................. 7 
How to install USB drivers (Windows) ........................................................... 7 
Configuration (Windows) ................................................................................... 7 
Quick SMS configuration.................................................................................... 8 
Mounting recommendations.............................................................10 
LED indications ....................................................................................11 
Characteristics .....................................................................................11 
Basic characteristics............................................................................................11 
Electrical characteristics ....................................................................................12 
Safety information..............................................................................14 
Certification and Approvals ...............................................................15 
Warranty..............................................................................................16 
Warranty Disclaimer...........................................................................................16 
 

FMB208 | Wiki

Know your device

Figure 1 FMB208 device view

FMB208 | Wiki

Pinout

Table 1 FMB208 pinout

PIN NAME

DESCRIPTION

VCC (10-30) V

Power supply DC (+).

GND (-)

Ground DC (-).

DIN 1

Digital input, channel 1.

DIN 2

Digital input, channel 2.

DOUT 1

Digital output, channel 1. Open collector output. Max.

0,5 A.

AIN 1 / DIN 3

Analog input, channel 1. Input range: 0-30 V DC.

Digital input, channel 3

RS232 –TX

Output for data transmit through RS232

RS232 –RX

Input for data receive through RS232

AIN 2 / DIN 4

Analog input, channel 2. Input range: 0-30 V DC. /

Digital input, channel 4.

DOUT 2

Digital output, channel 2. Open collector output. Max.

0,5 A.

Figure 2 FMB208 Pinout

FMB208 | Wiki

Figure 3 FMB208 Wiring scheme

Wiring scheme

Automotive relay

FMB208 | Wiki

Set up your device

How to insert Micro-SIM card and

connect the battery

1. Unscrew 6 screws counterclockwise that are located on the

bottom of the device.

2. Remove the cover.

3. Insert Micro-SIM card as shown with PIN request disabled or

read our Wiki how to enter it later in Teltonika Configurator.

Make sure that Micro-SIM card cut-off corner is pointing forward

to slot.

4. Connect battery as shown to device.

5. After configuration, see “PC Connection (Windows)”, attach device

cover back and screw in all screws.

6. Device is ready to be mounted.

Figure 4 Unscrew screws

Figure 5 Cover removal

Figure 6 Micro-SIM card insert

Figure 7 Battery connection

Figure 8 Attaching cover back

Figure 9 Device is ready

FMB208 | Wiki

PC Connection (Windows)

1. Power-up FMB208 with DC voltage (10 –30 V) power supply

using power cable. LED’s should start blinking, see “

2. LED indications”.

3. Connect device to computer using Micro-USB cable or Bluetooth

connection:

•Using Micro-USB cable

▬You will need to install USB drivers, see “How to install USB

drivers (Windows)”

•Using Bluetooth

▬FMB208 Bluetooth is enabled by default. Turn on Bluetooth

on your PC, then select Add Bluetooth or other device >

Bluetooth. Choose your device named –

“FMBxxx_last_7_imei_digits”, without LE in the end. Enter

default password 5555, press Connect and then select

Done.

4. You are now ready to use the device on your computer.

How to install USB drivers

(Windows)

1. Please download COM port drivers from here.

2. Extract and run TeltonikaCOMDriver.exe.

3. Click Next in driver installation window.

4. In the following window click Install button.

Setup will continue installing the driver and eventually the

confirmation window will appear. Click Finish to complete the setup.

Configuration (Windows)

At first FMB208 device will have default factory settings set. These

settings should be changed according to the user's needs. Main

configuration can be performed via Teltonika Configurator software.

Get the latest Configurator version from here.Configurator operates

on Microsoft Windows OS and uses prerequisite MS .NET

Framework. Make sure you have the correct version installed.

Table 2 MS .NET requirements

MS .NET REQUIREMENTS

Operating

system

MS .NET Framework

version

Version

Links

Windows Vista

Windows 7

Windows 8.1

Windows 10

MS .NET Framework

4.6.2

32 and 64 bit

www.microsoft.com

Downloaded Configurator will be in compressed archive. Extract it

and launch Configurator.exe. After launch software language can be

changed by clicking in the right bottom corner (Figure 10

Language selection).

FMB208 | Wiki

Configuration process begins by pressing on connected device (Figure

11 Device connected via USB).

After connection to Configurator Status window will be displayed

(Figure 12 Configurator Status window).

Various Status window tabs display information about GNSS,GSM,

I/O, Maintenance and etc. FMB208 has one user editable profile,

which can be loaded and saved to the device. After any modification of

configuration the changes need to be saved to device using Save to

device button. Main buttons offer following functionality:

1. Load from device –loads configuration from device.

2. Save to device –saves configuration to device.

3. Load from file –loads configuration from file.

4. Save to file –saves configuration to file.

5. Update firmware –updates firmware on device.

6. Read records –reads records from the device.

7. Reboot device –restarts device.

8. Reset configuration –sets device configuration to default.

Most important configurator section is GPRS –where all your server

and GPRS settings can be configured and Data Acquisition –where

data acquiring parameters can be configured.

More details about FMB208 configuration using Configurator can be

found in our Wiki.

Quick SMS configuration

Figure 11 Device connected via USB

Figure 10 Language selection

Figure 12 Configurator Status window

FMB208 | Wiki

Default configuration has optimal parameters present to ensure best

performance of track quality and data usage.

Quickly set up your device by sending this SMS command to it:

Note: Before SMS text, two space symbols should be inserted.

GPRS settings:

•

2001

–APN

•

2002

–APN username (if there

are no APN username, empty

field should be left)

•

2003

–APN password (if there

are no APN password, empty

field should be left)

Server settings:

•

2004

–Domain

•

2005

–Port

•

2006

–Data sending protocol (0

–TCP, 1 –UDP)

Default configuration settings

Movement and ignition detection:

Vehicle movement will

be detected by

accelerometer

Ignition will be detected

by vehicle power voltage

between 13,2 –30 V

Device makes a record On Moving if one of these events happen:

300 seconds passes

Vehicle turns 10 degrees

Vehicle drives 100

meters

Speed difference between

last coordinate and

current position is greater

than 10 km/h

Device makes a record On Stop if:

1 hour passes while

vehicle is stationary and

ignition is off

Records sending to server:

If device has made a

record it is sent to the

server every 120

seconds

After successful SMS configuration, FMB208 device will synchronize

time and update records to configured server. Time intervals and

default I/O elements can be changed by using Teltonika

Configurator or SMS parameters.

" setparam

2001

:APN;

2002

:APN_username;

2003

:APN_password;

2004

:Domain;

2005

:Port;

2006

;0"

FMB208 | Wiki

Mounting recommendations

•Connecting wires

▬Wires should be fastened to stable wires or other non-moving

parts. Any heat emitting and/or moving objects should be kept

away from the wires.

▬There should be no exposed wires. If factory isolation was

removed while connecting the wires, the isolation material

should be applied.

▬If the wires are placed in the exterior or in places where they

can be damaged or exposed to heat, humidity, dirt, etc.,

additional isolation should be applied and the wires should not

be loose.

▬Wires cannot be connected to the board computers or control

units.

•Connecting power source

▬Be sure that after the car computer goes to sleep mode, power

might be still available on the power wires. Depending on the

car model, this may happen in 5 to 30 minutes period.

▬When the module is connected, measure the voltage again to

make sure it did not decrease.

▬It is recommended to connect to the main power cable in the

fuse box.

▬3 A, 125 V external fuse shall be used.

•Connecting ignition wire

▬Be sure to check if it is a real ignition wire i. e. power does not

disappear after starting the engine.

▬Check if this is not an ACC wire (when key is in the first position,

most of the vehicle electronics are available).

▬Check if power is still available when you turn off any of vehicles

devices.

▬Ignition is connected to the ignition relay output. As alternative,

any other relay, which has power output when ignition is on,

may be chosen.

•Connecting ground wire

▬Ground wire is connected to the vehicle frame or metal parts

that are fixed to the frame.

▬If the wire is fixed with the bolt, the loop must be connected to

the end of the wire.

▬For better contact scrub paint from the spot where loop is

going to be connected.

PAY ATTENTION! Connecting the power supply must be

carried out in a very low impedance point of on-board

vehicle network. Connecting the GND at an arbitrary point

to the mass of the car is unacceptable, as static and dynamic

potentials on the line GND will be unpredictable, which can

lead to unstable FMB208 operation and even its failure.

Table des matières

Autres manuels Teltonika GPS

Teltonika

Teltonika FMB225 Manuel utilisateur

Teltonika

Teltonika FMM003 Manuel utilisateur

Teltonika

Teltonika Telematics FTC921 Guide d'installation

Teltonika

Teltonika GH120 Series Mode d’emploi

Teltonika

Teltonika FMB910 Guide d'installation

Teltonika

Teltonika FMB630 Manuel utilisateur

Teltonika

Teltonika FMB125 Guide d'installation

Teltonika

Teltonika TAT141 Manuel utilisateur

Teltonika

Teltonika TFT100 Guide d'installation et d'utilisation

Teltonika

Teltonika FMM125 Manuel utilisateur

Teltonika

Teltonika FMB1YX Manuel utilisateur

Teltonika

Teltonika FMC640 Guide d'installation

Teltonika

Teltonika FMM001 Guide d'installation

Teltonika

Teltonika FMM003 Guide d'installation

Teltonika

Teltonika FMB965 Guide d'installation

Teltonika

Teltonika FMB640 Manuel utilisateur

Teltonika

Teltonika Telematics FMM150 Manuel utilisateur

Teltonika

Teltonika FM6300 Guide d'installation et d'utilisation

Teltonika

Teltonika TAT140 Manuel utilisateur

Teltonika

Teltonika FM3101 Manuel utilisateur

Teltonika

Teltonika GH5200 Manuel utilisateur

Teltonika

Teltonika GH5200 Manuel utilisateur

Teltonika

Teltonika FMM00A Guide d'installation

Teltonika

Teltonika FMB130 Manuel utilisateur

Manuels GPS populaires d'autres marques

Raven

Raven Cruizer II Manuel

Hama

Hama 53118 Manuel utilisateur

Garmin

Garmin SOUNDER 125 Manuel utilisateur

Garmin

Garmin DEZL 580 Manuel utilisateur

Jigabot

Jigabot EX Manuel utilisateur

Pointer

Pointer Cellocator CelloTrack XT LTE Guide d'installation

Queclink

Queclink GV55LITE Manuel utilisateur

Voxson

Voxson Voxtrack GPS500 Manuel d'instructions

Garmin

Garmin ECHOMAP PLUS Manuel utilisateur

Starcom Systems

Starcom Systems Kylos Compact Manuel utilisateur

Garmin

Garmin 15 H Series Manuel utilisateur

Cobra

Cobra Marine MC 600Ci Manuel utilisateur

Cellocator

Cellocator CelloTrack T Manuel utilisateur

Enfora

Enfora Mini-MT GSM2228UG001 Manuel utilisateur

Magellan

Magellan eXplorist 100 Manuel utilisateur

LTE

LTE G50B Manuel utilisateur

Garmin

Garmin DEZL OTR500 Manuel utilisateur

SkyGolf

SkyGolf SkyCaddie SG1 Manuel utilisateur