START-S3XL Technical Manual
Foreword
need to familiarize yourself with and correctly operate
your unit. Read it very carefully when you purchase the
instrument and consult it whenever you have doubts
regarding use and before performing any maintenance
operations. Nologo has the right to modify the product
without previous notice.
Environmental protection
measures
Information regarding the environment for
customers within the European Union. Eu-
ropean Directive EC 2002/96 requires that
units bearing this symbol on the unit and/or
on the packaging be disposed of separately
from undifferentiated urban wastes.
The symbol indicates that the product must not be dis-
posed of with the normal household wastes. The owner
is responsible for disposing of this product and other
waste collection facilities indicated by the government
or local public agencies. Correct disposal and recycling
help prevent any potentially negative impact on the en-
vironment and human health. To receive more detailed
information regarding disposal of your unit, we recom-
mend that you contact the competent public agencies,
the waste collection.
Index
Par. Description Pag.
1 Introduction 3
1.1 Product description
1.2 Field of application
1.3 Type of installation
1.4 Technical features
2 Installation 4
2.1 Diagram of the control unit and electrical connections
2.2 Description of the electrical connection 5
2.3 Connection of the FLASHING LIGHT 230 Vac 6
2.4 Connection of one 24V gate open and moving LIGHT
2.5 Connection of the COURTESY light
2.6 Power supply of the accessories
2.7 Connection of the STOP/ALT control devices 7
2.8 Connection of LIMIT SWITCHES LSO and LSC
2.9 Connection of the MAGNETIC LIMIT SWITCHES
2.10 Connection of the 24 Vac photocell 8
2.11 Connection of the 24 Vdc photocell
2.12 Connect the 3 wires photo-beam 9
2.13 Connection of the “START” and “PEDESTRIAN” commands
2.14 Checking connections
3 Operating logic for DIP 10
4 Management of Remote control
4.1 Activation of the radio receiver
4.2 DELETING the codes memory 16
4.3 Remote control LEARNING
5 Turning on and programming the unit 12
5.1 Learning “START” OPENING COMMAND times 13
5.2 Times learning with the “PEDESTRIAN” COMMAND 14
5.3 Regulating of the MOTOR FORCE
5.4 Increasing the PAUSE time 15
5.5 RESET of the CONSTRUCTION SETTING UP
6 Problems solution
7 Declaration of CE conformity 16
Symbols and warning
DANGEROUS
This is a warning and if it is not re-
spec it can provoque material dam-
age.
DEVICE UNDER TENSION
The installation should be done
only from professional installer.
READ CAREFULLY THE
OPERATING MANUAL
Read carefully this manul before in-
stallation and keep it for the future.
-2-
