TellSystem Communication EasyCon GSM Manuel utilisateur

EasyCon GSM

MINIATURE GSM/GPRS COMMUNICATOR

INSTALLATION AND USER’S GUIDE

Version: 2.1

EasyCon GSM .TellSystem.eu

Index

Device description and function........................................................................................................................................ 3

Figure 1: Device operation........................................................................................................................... 3

Module buildup.................................................................................................................................................................... 4

Figure 2: The buildup of the module............................................................................................................4

Figure3: Series terminal iring diagram......................................................................................................4

Figure 4: Inserting the SIM card................................................................................................................... 4

Installation guide................................................................................................................................................................. 5

Technical parameters................................................................................................................................... 5

Installation steps.......................................................................................................................................... 5

LED signals.................................................................................................................................................. 6

Connecting t e module (PC).............................................................................................................................................. 6

Establishing connection using USB adapter................................................................................................ 6

Establishing connection using a Bluetooth adapter.....................................................................................7

Programming using t e PC software................................................................................................................................ 7

Connecting process..................................................................................................................................... 8

Program buildup.......................................................................................................................................... 8

Readout of GSM signal strength................................................................................................................ 10

Input configuration..................................................................................................................................... 12

Figure 5. T o possible iring of Normal Open (NO) and Normal Close (NC) inputs.................................12

Adjusting outputs....................................................................................................................................... 13

Po er supply monitoring setup.................................................................................................................. 14

Life signal................................................................................................................................................... 14

Anti Jammer System (AJS) settings.......................................................................................................... 15

SMS notification of arming/disarming........................................................................................................ 15

Remote surveillance settings..................................................................................................................... 15

GPRS settings........................................................................................................................................... 16

Programming wit Android based mobile p one........................................................................................................... 18

Starting the program.................................................................................................................................. 18

Connecting to the module.......................................................................................................................... 18

The menu tree........................................................................................................................................... 18

Programming wit SMS commands................................................................................................................................ 19

Command Criteria...................................................................................................................................... 19

Command list............................................................................................................................................. 19

SMS command examples:......................................................................................................................... 20

GSM gate control compact view...................................................................................................................................... 21

Page 2

EasyCon GSM .TellSystem.eu

Device description and function

The GSM device can be used for remote controlling (ex.: gate opener) and as an accessory to alarm centers. The module

has 2 contact driven inputs and one open collector output. By using a relay it is possible for the output to be a relayed

output.

It can send notification to 8 phone numbers in SMS and/or by voice message. The notification sending can be triggered

by a signal arriving to any of the t o inputs, by po er failure, by sabotage or by arming/disarming the GSM module. The

notification can be accompanied by an additional voice message that ill be played hen the call is ans ered. These

recordings can be 8 seconds at most. The voice message can also be a shared identifying message ith length of

maximum 15 seconds.

The controlling of the output can be achieved by a free call from any phone number. If you ant to control ith phone

number identification you can store the numbers in the inner memory of the module (in this case 1.000 entries) or on the

SIM card inserted into the module. By using caller phone number identification the unauthorized triggering of the output

can be forbidden.

Output can be controlled also ith SMS command that can contain different settings instructions then the saved ones (ex.

controlling bistable, disarmed output for 10 seconds). You can find additional information of this command on page 20.

By using OC relay the GSM module output ith the expansion relayed panel can be converted to a dry relay output.

Relay type is NO/NC and it can handle even 230V.

Some errors can be also authorized to control the outputs so you can receive feedbacks of system functionality or error

occurrences. No GSM net ork connection failure (not to confuse ith GSM jammer detection that is handled separately

by the module) and failed SMS sending can result in controlling.

The module can store up to 16.000 events in hich appear states of the inputs and outputs, po er source restarts, GSM

system and module state related information, incoming and outgoing calls and SMSs.

Implemented Anti Jammer System (AJS) protects from GSM jammers. The significant dropping of the GSM strength or a

net ork connection failure initiates a prompt alarm. In these situations module tries to send notifications using remaining

net ork possibilities. It can be set that by controlling the output even an auxiliary siren can be controlled. This possibility

is especially useful if you ould like to fob the person ho committed the sabotage.

Besides continuous po er source monitoring the module observes also the GSM strength. These data can be readout in

hourly divisions and these can be charted by the programming soft are.

The module can be programmed by SMS command, voice menu, PC or by Android mobile phone.

Figure 1: Device operation

Page 3

EasyCon GSM .TellSystem.eu

Module buildup

Figure 2: T e buildup of t e module

Figure 3: Series terminal wiring diagram

Figure 4: Inserting t e SIM card

Page 4

EasyCon GSM .TellSystem.eu

Installation guide

Tec nical parameters

Po er voltage: 9-20 VDC

Standby po er drain: 25 mA

Maximum po er drain: 700 mA

Open Collector output load: max. 30V / 400mA

GSM module type: SIMCOM 900

GSM frequencies: GSM 850 / EGSM 900 / DCS 1800 / PCS 1900 (Multi- Band)

SIM card usage: brand free GSM module

GSM antenna type: ith SMA connector (comes ith the package)

Dimension: 61 x 31 x 14 mm

Operation temperature: 0°C - +40°C

Installation steps

1. Carry out a signal strength check ith your mobile phone. Sometimes occurs there is no sufficient signal strength

at the commissioning site. In this case it is recommended to change the module position prior of installation.

Do not install the device to places here strong electromagnetic aves might occur, ex. next to electric motors or

alarm transformers.

Do not install in atery places or to places ith great humidity.

2. Connect the antenna that can be secured ith the SMA connector. If you are reading lo signal strength use

antenna ith higher gain. Signal strength gro can also be achieved by repositioning the antenna.

Do not position t e antenna under metal cover of various appliances as t ose mig t significantly ruin t e

signal strengt .

3. You s ould opt out t e PIN number request, voicemail and call notification functions of t e SIM card.

Sometimes ne SIM cards must be activated (usually an outgoing call has to be made).

Check the validity of the card. If you have a prepaid card check its balance and its usage possibilities (ex. it can

be used only for calls)

4. It is practical to check the satisfying operation of a SIM card in a cell phone prior of insertion into a module.

Number identifying of caller and at call initiations has to be checked. This function at certain service providers

must be enabled formerly.

5. Insert the SIM card in the SIM card slot of the module.

6. Connectors have to be connected according to the iring diagram. If you are dealing ith OC output mind the

correct iring of the relay protecting diode.

7. If you are orking ith OC relay be cautious especially in avoiding electric shocking. A proper contact protection

must be established. If you are not qualified ask for professional help.

8. Check if the po er supply performance ill be sufficient for the module. Mind the polarity.

If iring is reversed the module ill not operate or might get damaged.

9. No the device can be po ered.

10. After connecting the voltage supply the red LED is lighted indicating the device is establishing connection ith the

GSM system (this is 1 minute utmost).

11. If red LED goes off and green LED flashes module is online and connected to net ork. The flash number(s)

indicates the GSM signal strength.

For programming t e power supply must be connected! Module can acquire t e power needed for

programming also from t e USB adapter.

Page 5

EasyCon GSM .TellSystem.eu

LED signals

Signals give essential information on module state, the GSM signal strength and the actual error codes. By blinking e

mean flashes bet een t o longer pauses.

A STATUS LED (green) gives feedback of signal strength based on the chart belo :

Flashes Signal quality

1Bad

3 Decent

4 Good

5 Excellent

LED lighted GSM connection rejected

An ACT LED (red) lit means the initiation process at startup. At this phase module performs the initial checkings.

During operation this LED signals an event (SMS or voice call).

If the red and green LED are flashing simultaneously it tries to communicate an error that can be identified ith

the chart belo :

Flashes Error code

1 Initializing error

2Bad GSM module

3SIM card not inserted

4SIM card locked ith PIN

code

10 Modem mode

The intermittent flashes of red and green LED means the usage of ‘’reset” button and resetting to factory settings.

To s itch-off the modem mode, open the module status indo in the Services menu.

Connecting t e module (PC)

Establis ing connection using USB adapter

1. Connect the USB adapter to the Program labeled slot of the module.

2. The ne USB adapters are able to provide sufficient po er for GSM module programming.

3. Attach the USB connector of the adapter to an extension cable and plug the other end of the cable into any PC

USB port.

4. WARNING! If you are using Windows Xp operating system the system offers an automatic driver installation.

IMPORTANT, do not use the offered driver but carry on ith the installation of the USB driver.

Installing the USB driver manually in 10 steps

✔Acquire the required driver from our eb site or from the ‘’USB driver’’ directory on the CD if you

have the USB Kit

✔Use the appropriate 32 or 64 bit version for your operating system in the rest of the installation

process

•to check this use the Control Panel → System menu path ( hen using Windo s XP ‘’x64

Edition” ill only appear if the system is running on 64 bit)

✔Connect the USB programmer to your PC

✔Do not choose the automatic installation offered by the system

✔Open the path Control Panel → System→ Hard are Device Manager indo .

✔In this indo search for Unknown device ( hich is the programmer, later ill be USB Serial

port). If you cannot see it start the “Scan for hard are changes” process from the upper indo

menu.

✔Device properties can be seen by double clicking on the unkno n device.

Page 6

EasyCon GSM .TellSystem.eu

✔Start the Update driver process

✔In the installation indo choose the manual selection of the driver location then choose the

appropriate folder containing the 32 or 64 bit driver

✔Click on the Next button to start the installation.

5. Open the Device Manager (click on System→ Properties→Hard are tab → Device manager)

6. Search for a device named USB Serial port (COM…) under Ports

•If a driver reinstall is needed click on the device then choose driver removal then follo instructions

above.

7. Start the programming soft are.

8. You have to set the value in brackets [USB Serial port (COM…)] in the programming soft are

9. If this as successful you ill see the name of the connected module next to the Start button

Establis ing connection using a Bluetooth adapter

1. Connect the Bluetooth adapter to the GSM module and provide po er to it.

2. S itch on the Bluetooth connection possibility on your device (PC or Android mobile phone).

3. Search for programmer ith your Bluetooth enabled device.

4. After finding the adapter you can pair your PC/smart phone/tablet ith the adapter by using the default

’’1234’’ code. After pairing you ill find the programmer as GSM Programmer.

5. Search for the COM port number of the connection (usually under Properties -> Hardware tab)

6. Set the port number also in your programming soft are or choose the automatic port finding option.

7. Establish a connection ith the GSM module.

If you use Windows 8 operating system the programming software should e started in “Windows XP

SP2/SP3” compati ility mode (Right click on the starting icon of the program → Properties →

Compati ility)

In every case you can check the connection. You should see the connected module name next to the Start button in the

programming soft are and the green LED on the programmer to flash.

If you ave a connection establis ed between t e adapter and your PC or smart p one you can start t e module

configuration.

•By clicking t e Start button after t e connection was establis ed modules settings will be

acquired.

•By clicking t e Start/Default config button (after a confirmation) it will revert back t e module to

factory settings.

•W en using t e Android application settings are always acquired after establis ing a connection.

Programming using t e PC software

If you have chosen configuration by PC you can use our soft are that is freely do nloadable from our

ebsite or you can find it on the installation CD in the USB KIT.

No installation required, you only have to copy the software to your P .

Compatible ith Windo s XP, 7 and 8

Make sure you al ays use the latest soft are!

If ne er soft are is out the module should be updated prior to the first configuration.

Page 7

EasyCon GSM .TellSystem.eu

Connecting process

Pick hich connection (USB or Bluetooth) you ould like to use for module programming.

Belo the language selection in the scroll do n list you can select the port through hich you ould like to

communicate ith the module programmer. You can find this value (in Windo s operating system) under

Device manager → Com port at the connected programmer. If you cannot decide you might let the program

to search for it by pressing the automatic COM port finding. The automatic COM port search might take

several minutes.

If the connection as successful you ill see under the Product connection tab the name of the module.

Clicking the start button the soft are makes connection to the module and configuration can be started.

By clicking the Start/Default config button the module ill be set back to default values after the connection

as established. (Before the operation the soft are asks for confirmation if this feature has not been

s itched off before).

If you do not ant to attach a module just to inspect the settings options you can select the Products-tryout

indo here you can freely make a module properties selection and also module preprogramming.

Program buildup

Upper menu items:

◦Maintenance: basic menus needed for module maintenance (for ex. module state check, event log

readout, PIN code request s itch off of the SIM card, firm are upgrade)

◦File commands: Saving and loading settings

◦Descriptions: vie ing the iring diagram

◦Settings: setting indo size, s itch off confirming dialogs

◦Language: language selection(available languages: English, Hungarian, Italian, German, Slovak,

Slovenian, Dutch, bohemian, Finn, Romanian)

◦Contact: our contacts; e-mail addresses and phone numbers

◦GSM: reverting back to factory settings the GSM chip (SIM900 chip) and auxiliary PSTN line monitoring

(in case of a failure), providing GSM information, saving central SMS number of the net ork operator

You can reach the various settings of various items by clicking the appropriate tab

On the main page (Basic data tab) clicking the Synchronization makes the module to adjust its time to the PC

clock.

The Reading and Sending buttons at the bottom are for readout and edit of the module configuration. These

buttons are accessible every here except on the Controlling phone num ers tab.

You should send data to the module ith the Send button after every significant modification.

Page 8

EasyCon GSM .TellSystem.eu

Before sending your settings make sure those ill not trigger an unexpected alert. You should readout the

actual module state beforehand (Maintenance tab).

WARNING! After connection always readout t e settings first if you would like to alter t ose.

You can restart t e module wit t e Restart button. After monitoring is complete t e module s ould

be restarted.

In the lo er menu line you can be informed of the follo ings:

◦Communication port number

◦GSM module name

◦Firm are version number

◦Notification on the actual soft are process

◦ProRead version number

C ecking module status

You can reach the status through Servicing → Show module status button.

By the module status query you ill be informed of the follo ings:

statuses of inputs

statuses of outputs

po er supply failure notification

actual armed/disarmed GSM module state

displaying occurring error/event codes (ex.: no SIM card inserted, SIM card locked by PIN code)

checking Contact ID code (to monitoring station) sending process (ex. handshake status)

GSM connection status (ex.: connected to net ork, roaming, no connection, connection rejected)

Actual GSM signal strength (refreshing in seconds)

Switc ing off PIN code request on SIM card

Before inserting SIM card in the module the PIN code request should

be s itched off

If you have not done yet then you can s itch off at

Service→Switch off PIN code request.

You ill see the follo ing indo , here you can input the

code and its request ill be s itched off.

Page 9

EasyCon GSM .TellSystem.eu

Event Log Readout

The event log can be vie ed ith Service →Log readout button:

It can store up to 16.000 events in FILO (first in-last out) mode

The acquired list can be saved in ‘’csv” file for later examination. This can be done also in the event list by clicking

the ‘’Open csv” button.

In the token column there are event information

In the date column notification dates are stored (divided into years, months, days, hours, minutes, and seconds).

IMPORTANT! Date ill be accurate if the clock of the module is synchronized ith a PC or ith a GSM net ork.

The later is automatically done hen the module connects to the net ork of the carrier.

The GSM 0-31 indicates the signal strength at the time of creation. 31 is the highest value, 0 indicates state ith

no connection.

Net ork indicates if the module as connected to the net ork carrier at the time of creation.

In the Comment/parameter column notification related extra information are stored.

Initially the chart is empty; the readout can be commenced by pressing the ”Readout” button.

The ne est data ill appear at the top of the list follo ed by older entries as you go do n the chart.

If the hole chart readout is not necessary you can stop it ith the ’’Readout stop ’’ button.

Read out list can be exported from the soft are in ’’csv’’ (Excel) chart so later it can easily be sent and stored.

Readout of GSM signal strengt

You can display the chart in the picture of GSM signal strength.

The chart of GSM signal strength is available by the Service

→ Show GSM strength button

You can have the values by pressing the Readout button

Signal strength fluctuations are divided by hours. Passed time

should be interpreted according to this.

Vertical scale is calibrated from 0 to 31 on the diagram. 31

mean the best signal strength.

Size of the chart can be altered arbitrarily by left clicking.

Fill out basic data

Important data of the installed GSM module can be set. Besides the

client name and commissioning address the phone number of the

inserted SIM card and the type of the attached alarm center also can be

set.

Data inserted are stored in the module

Stored data can be useful later during servicings.

Page 10

Autres manuels pour EasyCon GSM

Table des matières

Manuels Téléphone portable populaires d'autres marques

Zte

Zte BLADE A520 Manuel utilisateur

Nokia

Nokia Lumia 620 Manuel utilisateur

Blackbe;rry

Blackbe;rry KEYone Manuel utilisateur

Bea-fon

Bea-fon X5 Premium Manuel utilisateur

Blackbe;rry

Blackbe;rry 8707 Series Manuel utilisateur

Blackbe;rry

Blackbe;rry Storm Mode d'emploi

LG LM-X420QN Manuel utilisateur

LifeWatch

LifeWatch V Manuel utilisateur

Bea-fon

Bea-fon SILVER LINE SL860 Manuel utilisateur

IKI Mobile

IKI Mobile KF4.5i Manuel utilisateur

Hitech

Hitech HT-850 Manuel utilisateur

Yezz

Yezz Fashion F10 Manuel utilisateur

Point Mobile

Point Mobile PM60 Manuel utilisateur

Blackbe;rry

Blackbe;rry Q10 Manuel utilisateur

Blackbe;rry

Blackbe;rry Bold 9900 Manuel utilisateur

Blackbe;rry

Blackbe;rry STORM 9500 - VERSION 5.0 Manuel utilisateur

LG LM-K420EMW Manuel utilisateur

ISAFE MOBILE

ISAFE MOBILE IS655.2 Manuel utilisateur