
7
INTRODUCTION
Designed to meet and exceed the needs of the recording, broadcast, installation and live sound
industries, the Klark Teknik DN3600 Programmable Graphic Equaliser is an extremely high
quality, digitally controlled, two-channel, third-octave equaliser that combines state-of-the-art
audio performance with unprecedented ease of use. The two channels may either be used
independentlyorlinkedfor stereo use. Tofurtherextendtheflexibility of the equaliser,theunit
also incorporates variable frequency low and high-pass filters, two notch filters with variable
frequency and depth and overall gain adjustment.
Featuring a very large backlit LCD display window, the DN3600 may store up to 66 equaliser
programs and the inclusion of a Pro MIDI interface enables several other DN3600s or DN3601
slaveunits(64maximum)tobecontrolledfromasingleDN3600. Theslaveunitsareelectrically
identical to the DN3600 but have limited control and display facilities. A 16-pin connector is
providedforuseinconjunctionwiththeDN60/DN6000RealTimeSpectrumAnalyserenabling
room analysis and equalisation to be accomplished automatically.
TheproprietaryanaloguefiltersarebasedaroundtheKlarkTeknik“MELT”hybridfiltercircuits
whichofferfargreaterheadroomanddynamicrangethanispossibleusingstandard20-bitlinear,
digital systems. Benefiting from revised circuitry, these filters are exceptionally reliable and
offergreater stabilitythandiscrete designs. Theyarealsorelativelyimmune toelectromagnetic
interference,unlikecoil-basedfilters. Separatesupplyrailsareusedforthedigitalandanalogue
circuitry which, in combination with rigorous internal screening, ensures the cleanest possible
audio signal path.
In order to provide maximum operational flexibility, the system includes a switchable Q mode.
The Low Q setting (Q:360) provides an accurate emulation of the industry-standard DN360
equaliser. In High Q mode (Q:27), the performance emulates the DN27.
To maintain the optimum signal to noise ratio and headroom at all equaliser settings, the gain
control acts on the equaliser sections themselves rather than being a simple pre or post-
equalisation gain stage. Additionally, an Auto gain mode is included in the system which
automaticallyscalesthegainoftheindividualequaliserbandsascutorboostisappliedtoreduce
the risk of accidental clipping and to maintain a safe working headroom.
Both the input and output circuitry is electronically balanced with a nominal operating level of
+4dBu. The output circuitry is based on the Midas XL3 output stage, giving exceptionally high
drive capability. A transformer option is available for both inputs and outputs.