TeleEye MX721-HD Manuel utilisateur

Quick Start Guide

TeleEye MX721-HD/MX821-HD Network Ca era

This Quick Start Guide will guide you how to install and configure the TeleEye MX721-H / MX821-H Network Camera

for remote video monitoring.

Ca era Installation

Step 1. After mounting the camera on the wall or ceiling, connect the Ethernet cable to the LAN adapter and

the 12V C power supply to the power cable if PoE is not available.

Step 2. Start sureSIGHT or a web browser to start a remote video

monitoring in order to adjust the camera.

[Reference] Please refer to the following sections to understand how to

start video monitoring.

Step 3. After removing the camera cover, loosen the screws to

adjust the viewing angle of the camera.

Step 4. Tighten the screws to fix the direction of the camera

module. Finally , close the camera cover.

IP Setup Utility

Step 1. After installing sureSIGHT and turning on the Network Camera, select the “Run TeleEye IP Setup

tility” from the windows start menu.

Step 2. Search the target camera by its serial number, highlight the corresponding row from the list on the left

side of the window to select it. If the camera cannot be found, click the [Refresh] button.

Step 3. Changes the network settings of the camera on the right side of the window, including IP, ports, mask,

etc. Press [Apply] button to confirm the settings.

Step 4. Enter the password to save the information when prompted.

[Note] The default password is “000000”.

Live Monitoring with Web-Browser

Step 1. Open a web browser on a PC and type in the IP address of the Network Camera.

Step 2. Select the connection type and input the password.

[Note] The default password is “000000”.

Step 3. Click the [Connect] button to connect the selected video stream. Video will then be displayed on the

browser as follow.

Live Monitoring with sureSIGHT

Step 1. After installing sureSIGHT and turning on the Network Camera,

select the “Run sureSIGHT Lite” from the windows start menu. Input the

password to log-in to the sureSIGHT.

[Note] The default password for administrator is “000000”.

Step 2. Click the [Connect] button on the left panel.

Step 3. Click the [Search all the sites] to search the target camera by

its serial number or site name.

Step 4. Select the target camera and confirm all the site information,

the sureSIGHT will then connect to the camera automatically.

[Note] the default password is “000000”.

[Reference] For detail operations, please refer to the sureSIGHT user manual.

END

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels TeleEye Caméra de sécurité

TeleEye

TeleEye DM860 Manuel utilisateur

TeleEye

TeleEye MX833-HD Manuel utilisateur

TeleEye

TeleEye DM720 Series Manuel utilisateur

TeleEye

TeleEye MS1120L Manuel utilisateur

TeleEye

TeleEye MX873-HD Manuel utilisateur

TeleEye

TeleEye MX151E-HD Manuel utilisateur

TeleEye

TeleEye MX810-HD Manuel utilisateur

TeleEye

TeleEye MX751-HD Manuel utilisateur

TeleEye

TeleEye DM870 Manuel utilisateur

TeleEye

TeleEye DM870 Manuel utilisateur

TeleEye

TeleEye DM 569 Manuel utilisateur

TeleEye

TeleEye MX125E-HD Manuel utilisateur

TeleEye

TeleEye DM338 Manuel utilisateur

TeleEye

TeleEye NF610 III Plus NF Series Manuel utilisateur

TeleEye

TeleEye DM587 Manuel utilisateur

TeleEye

TeleEye MX600 Manuel utilisateur

TeleEye

TeleEye DM860 Manuel utilisateur

TeleEye

TeleEye MX810-HD Manuel utilisateur

TeleEye

TeleEye NX288 Manuel utilisateur

TeleEye

TeleEye DM597 Manuel utilisateur

TeleEye

TeleEye MX677-HD Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur