TeleEye RA Series Manuel

RA Series

Digital Video Recorder

RA204 / RA208 / RA216

Supplementary Guide

Intelligent Security & Fire Ltd

Notice:

Signal Communications Limited reserves the right to make improvements to the product described

in this manual at any time and without notice.

This manual is copyrighted. All rights are reserved. This manual should not be copied, reproduced

or translated in whole or part without prior consent from Signal Communications Limited.

TeleEye is a trademark of Signal Communications Limited and is registered in China, European

Communities, Hong Kong, US and other countries.

All other trademarks are the property of their respective owners.

reserved.

Version 1.00

Limits of Liability and Disclaimer of Warranty

Signal Communications Limited has taken care in preparation of this manual, but makes no

expressed or implied warranty of any kind and assume no responsibility for errors or omissions. No

liability is assumed for incidental or consequential damages in connection with or arising out of the

use of the information or accessories contained herein.

Features and specifications are subject to change without prior notice.

Intelligent Security & Fire Ltd

Table of Contents

1. Introduction............................................................................................ 1

1.1.

1.1.1.1.

1.1. Introduction

IntroductionIntroduction

Introduction................................

................................................................

....................................

........

.... 1

11

1

1.2.

1.2.1.2.

1.2. Conv

ConvConv

Convention Used in This Manual

ention Used in This Manualention Used in This Manual

ention Used in This Manual................................

................................................................

...................................

......

... 1

11

1

2. Network Setup ....................................................................................... 2

2.1.

2.1.2.1.

2.1. TCP/IP Setup

TCP/IP SetupTCP/IP Setup

TCP/IP Setup................................

................................................................

..................................

....

.. 2

22

2

2.1.1. TCP/IP Setup Through On Screen Display (OSD) Menu.............................................. 2

2.1.2. TCP/IP Setup Through Network .................................................................................. 2

A. IP Setup Utility ................................................................................................................ 2

B. Web Browser.................................................................................................................... 2

2.2.

2.2.2.2.

2.2. Port Mapping Setup

Port Mapping SetupPort Mapping Setup

Port Mapping Setup................................

................................................................

........................................................

................................................

........................ 3

33

3

3. Local Advanced Operations.................................................................. 3

3.1.

3.1.3.1.

3.1. Schedule Recording (OSD)

Schedule Recording (OSD)Schedule Recording (OSD)

Schedule Recording (OSD) ................................

................................................................

............................................

........................

............ 3

33

3

3.2.

3.2.3.2.

3.2. Pan Tile Zoom (PTZ) Setting (OSD)

Pan Tile Zoom (PTZ) Setting (OSD)Pan Tile Zoom (PTZ) Setting (OSD)

Pan Tile Zoom (PTZ) Setting (OSD) ................................

................................................................

.............................................................

..........................................................

............................. 6

66

6

3.2.1. Connection with PTZ Cameras .................................................................................... 6

3.2.2. Configure PTZ Cameras Driver and Setting................................................................. 6

3.3.

3.3.3.3.

3.3. Alarm Sensors and Rela

Alarm Sensors and RelaAlarm Sensors and Rela

Alarm Sensors and Relay Control (OSD)

y Control (OSD)y Control (OSD)

y Control (OSD) ................................

................................................................

......................................................

............................................

...................... 9

99

9

3.4.

3.4.3.4.

3.4. Event Setting (OSD)

Event Setting (OSD)Event Setting (OSD)

Event Setting (OSD) ................................

................................................................

....................................................

........................................

.................... 10

1010

10

3.4.1. Alarm (OSD) ............................................................................................................. 10

3.4.2. Motion (OSD)............................................................................................................ 11

3.4.3. Video Loss (OSD)...................................................................................................... 13

3.4.4. Disk Usage Level (OSD) ........................................................................................... 13

3.4.5. HDD Available (OSD) ............................................................................................... 14

3.5.

3.5.3.5.

3.5. Action Setting (OSD)

Action Setting (OSD)Action Setting (OSD)

Action Setting (OSD) ................................

................................................................

...................................................

......................................

................... 14

1414

14

3.5.1. Recording (OSD) ....................................................................................................... 14

3.5.2. Buzzer (OSD) ............................................................................................................ 14

4. Remote Advanced Operations............................................................ 15

Intelligent Security & Fire Ltd

4.1.

4.1.4.1.

4.1. Schedule Recording (Net

Schedule Recording (NetSchedule Recording (Net

Schedule Recording (Network)

work)work)

work) ................................

................................................................

....................................

........

.... 15

1515

15

4.2.

4.2.4.2.

4.2. PTZ Setting (Network)

PTZ Setting (Network)PTZ Setting (Network)

PTZ Setting (Network)................................

................................................................

.................................................

..................................

................. 16

1616

16

4.2.1. Connection with PTZ Cameras .................................................................................. 16

4.2.2. Configure P/T/Z Cameras Driver and Setting............................................................. 17

4.2.3. PTZ Setting Procedure:.............................................................................................. 18

4.2.4. {Pan Tilt Zoom Control} Panel Description: .............................................................. 19

4.2.5. Program Preset Procedure:......................................................................................... 21

4.2.6. Recall/Edit Patrol Procedure: ..................................................................................... 22

4.3.

4.3.4.3.

4.3. Event Setting (Network)

Event Setting (Network)Event Setting (Network)

Event Setting (Network)................................

................................................................

...............................................

..............................

............... 23

2323

23

4.3.1. Alarm (Network) ....................................................................................................... 23

4.3.2. Motion (Network)...................................................................................................... 24

4.3.3. Video Loss (Network)................................................................................................ 27

4.3.4. Disk Usage Level (Network)...................................................................................... 28

4.3.5. HDD Available (Network) ......................................................................................... 28

4.4.

4.4.4.4.

4.4. Action Setting (Network)

Action Setting (Network)Action Setting (Network)

Action Setting (Network) ................................

................................................................

.............................................

..........................

............. 29

2929

29

4.4.1. Recording (Network) ................................................................................................. 29

4.4.2. Buzzer (Network) ...................................................................................................... 29

5. Appendix .............................................................................................. 31

5.1.

5.1.5.1.

5.1. Specification

SpecificationSpecification

Specification................................

................................................................

.................................

..

. 31

3131

31

Intelligent Security & Fire Ltd

Introduction

Supplementary Guide PAGE 1

1. Introduction

1.1. Introduction

TeleEye RA Series is a complete portfolio of practical video server utilising our proprietary

SMAC-M compression technology. The RA range offers the balanced combination of high-quality

video, mobility, scalability and cost effectiveness. User can access TeleEye RA digital video

recorder through Internet web browser anywhere and anytime.

To access RA series video server smoothly through web browser, there are some requirements for

your operational computer.

PC Requirements:

CPU: Pentium ® Dual-Core 2.2 GHZ or above

RAM: 1 GB or above

HDD: 1GB of free disk space or above

Display: 1024 x 768, true color

OS: MS Windows XP, Vista

Other Requirements:

Java: Sun Microsystems Java 2 runtime Version 1.5.0 or above

IE: Windows Internet Explorer Version 6 or above

1.2. Convention Used in This Manual

[ ] On Screen Display (OSD) menu items or buttons in software

Remarks

References

Intelligent Security & Fire Ltd

TCP/IP Setup

Supplementary Guide PAGE 2

2. Network Setup

2.1. TCP/IP Setup

2.1.1. TCP/IP Setup Through On Screen Display (OSD) Menu

1. Press [Menu] button on RA digital video recorder front panel or remote control, select

[SETUP] 



[CONNECTION] 



[TCP/IP]

2. Select “NO” for [Auto IP] if you want to change IP address, mask or gateway

3. Use [↑

↑↑

↑] and [↓

↓↓

↓] buttons to set IP address, mask or gateway.

4. Wait for the system to save the setting

2.1.2. TCP/IP Setup Through Network

A. IP Setup Utility

1. Install TeleEye IP Setup Utility software using the bundled CD. .NET framework is needed for

IP Setup Utility operation. You can find .NET framework installer in RA software CD.

2. Run IP Setup Utility

3. Find your RA digital video recorder according to the series number provided by your provider.

4. To assign another IP address, mask or gateway, click to uncheck “Obtain an IP address

automatically” and enter the corresponding information.

5. Make sure the gateway is the same as your router.

6. Click on [Apply] to save the changes

B. Web Browser

1. Type in the IP address plus port number (http://IPAddress:Port ) in web browser address bar or

use TeleEye IP Setup Utility to access RA web page

2. Click on [Menu] 



[Server Setting] , select [Network]

Intelligent Security & Fire Ltd

Port Mapping Setup

Supplementary Guide PAGE 3

Figure 2-2-1 Network Settings

3. To assign another IP address, mask or gateway, click to uncheck “Obtain an IP address

automatically” and enter the corresponding information

4. Click on [Apply] to save the changes

2.2. Port Mapping Setup

Port mapping, also called port forwarding or punch-through, enables you to create a permanent

translation entry that maps a protocol port on your gateway machine to an IP address and protocol

port on your private LAN. This process enables you to run a public Internet service on a machine

that is otherwise hidden from the Internet by your gateway.

To access your RA digital video recorder outside your private LAN, you need to do port mapping

for your RA digital video recorder. For detail setup procedure please refer to your router user

manual. After finish the port mapping, you can always access your RA digital video recorder

anywhere by the IP address and port number through web browser. The address should be in this

format: http://IPAddress:Port .

The default port number is 1024.You can use this port number for pop mapping.

3. Local Advanced Operations

3.1. Schedule Recording (OSD)

TeleEye RA series digital video recorder supports schedule recording Users can specify different

recording time from Monday to Sunday. Besides, RA series digital video recorder also support

Intelligent Security & Fire Ltd

Schedule Recording (OSD)

Supplementary Guide PAGE 4

motion recording, which mean during the user define time period recording will start when a motion

event is triggered.

Schedule recording setup procedure:

1. Press on [MENU] button, select [RECORDING] 



[SCHEDULE RECORDING]

Figure 3-3-1 Schedule Recording

2. Use [←

←←

←]and [→

→→

→]buttons to select a day

3. Click on [OK] button to pop up {OPTION MENU}

Figure 3-3-2 Option Menu

4. Select [ADD]

Intelligent Security & Fire Ltd

Schedule Recording (OSD)

Supplementary Guide PAGE 5

Figure 3-3-3 Schedule Adding

5. Use [←

←←

←]and [→

→→

→]buttons to select a Type. “Motion Rec” means recording will start when a

motion event is triggered. Please refer to 3.4.2 Motion for motion detection area setting.

6. Use [←

←←

←]and [→

→→

→]buttons to select a day and use [↑

↑↑

↑] and [↓

↓↓

↓] buttons to enable or disable a day

7. Use [↑

↑↑

↑] and [↓

↓↓

↓] buttons to select start time and end time

8. Click [OK] button to apply the setting

9. Click on [OK] button to pop up {OPTION MENU}

10. Select [Edit] to edit a selected schedule

11. Click on [OK] button to pop up {OPTION MENU}

12. Select [REMOVE] to delete schedules

Figure 3-3-4 Schedule Removing

13. Click on [OK] button to pop up {OPTION MENU}

14. Select [COPY] to copy schedule

Intelligent Security & Fire Ltd

Pan Tile Zoom (PTZ) Setting (OSD)

Supplementary Guide PAGE 6

Figure 3-3-5 Schedule Copy

15. Select to copy single schedule or schedules of entire day

16. Select a day by using [←

←←

←]and [→

→→

→]buttons to select a day and [↑

↑↑

↑] and [↓

↓↓

↓] buttons to enable or

disable a day.

3.2. Pan Tile Zoom (PTZ) Setting (OSD)

As TeleEye RA digital video recorder built with a RS485 IN and OUT port, you can connect port

OUT to Pan/Tilt/Zoom cameras (in parallel) and connect port IN to keyboard controller. The

connection diagram is shown below.

3.2.1. Connection with PTZ Cameras

1. Connect the P/T/Z cameras to the RS 485 OUT port in parallel at the TeleEye RA rear panel.

Connect the P/T/Z cameras to video input port according to each P/T/Z camera ID.

All P/T/Z cameras should be the same model.

2. Connect the keyboard controller to the RS 485 IN port at the TeleEye RA rear panel. For

keyboard controller setup, please refer to the keyboard controller manual.

3.2.2. Configure PTZ Cameras Driver and Setting

Pan Speed

The horizontal movement speed of the PTZ camera

Tilt Speed

Intelligent Security & Fire Ltd

TeleEye RA Series Manuel

Manuels DVR populaires d'autres marques