Teledyne FLIR ONE Manuel utilisateur
Teledyne FLIR
Infrared Camera OEM
1
Equipment described herein is subject to US export regulations and may require a license prior to export. Diversion contrary to US law is prohibited.
Imagery for illustration purposes only. Specications are subject to change without notice. Rev. 100.
© 2021Teledyne FLIR LLC. Approved for public release.Teledyne FLIR Approved [FLIRGTC-SBA-005]. All rights reserved.
QUICK START GUIDE:
LEPTON AND RASPBERRY PI
Required Materials
• A. Flir Lepton® & Lepton Breakout board
• B. Raspberry Pi
• C. CanaKit A Power Supply for Raspberry Pi (Or a powerful enough Micro USB charger)
• H. Computer Monitor with HDMI Port
• I. HDMI Cable
• J. Power Cable for Monitor
• K. USB Mouse
• L. USB Keyboard
Teledyne FLIR
Infrared Camera OEM
2
Equipment described herein is subject to US export regulations and may require a license prior to export. Diversion contrary to US law is prohibited.
Imagery for illustration purposes only. Specications are subject to change without notice. Rev. 100.
© 2021Teledyne FLIR LLC. Approved for public release.Teledyne FLIR Approved [FLIRGTC-SBA-005]. All rights reserved.
The following items are required, but included in the CanaKit Raspberry Pi GPIO Breakout Board
Bundle:
• D. Breadboard
• E. Wires
• F. CanaKit GPIO Breakout Board
• G. Ribbon Cable
Setting up the breadboard
1 Take out the Canakit GPIO Breakout Board and it’s ribbon cable from it’s plastic bag and remove it
from pink foam.
Teledyne FLIR
Infrared Camera OEM
3
Equipment described herein is subject to US export regulations and may require a license prior to export. Diversion contrary to US law is prohibited.
Imagery for illustration purposes only. Specications are subject to change without notice. Rev. 100.
© 2021Teledyne FLIR LLC. Approved for public release.Teledyne FLIR Approved [FLIRGTC-SBA-005]. All rights reserved.
2 Attach Breakout Board to ribbon cable as shown.
3Place Breakout Board onto breadboard as shown.
Teledyne FLIR
Infrared Camera OEM
4
Equipment described herein is subject to US export regulations and may require a license prior to export. Diversion contrary to US law is prohibited.
Imagery for illustration purposes only. Specications are subject to change without notice. Rev. 100.
© 2021Teledyne FLIR LLC. Approved for public release.Teledyne FLIR Approved [FLIRGTC-SBA-005]. All rights reserved.
4 From the bundle of wires, select the following colors as shown. Colors can be interchanged as long
as you have the same number of wires for that color. (Example: photo shows 2 yellow wires, can be
changed with 2 of any other color)
5 Attach the wires from the breakout board to the following rows (as labeled) Follow the pictures
shown for gudiance.The key below shows where the pins go: (From breakout board to row #)
6 Key:
• a. White wire: Row (left) to Row (right)
• b.Yellow : Row (right) to Row (right)
• c.Yellow : Row (right) to Row (right)
• d. Blue Wire : Row (right) to Row (right)
• e. Black Wire: On row of holes next to red bar (right) to Row (right)
• f. Red Wire: On row of holes next to blue bar (right) to Row (right)
• g. Green Wire: Row (right) to Row (right)
• h. Blue Wire : Row (right) to Row (right)
Teledyne FLIR
Infrared Camera OEM
5
Equipment described herein is subject to US export regulations and may require a license prior to export. Diversion contrary to US law is prohibited.
Imagery for illustration purposes only. Specications are subject to change without notice. Rev. 100.
© 2021Teledyne FLIR LLC. Approved for public release.Teledyne FLIR Approved [FLIRGTC-SBA-005]. All rights reserved.
When you’re all done, this is how it will look. Detailed steps to get this nal appearance follow below.
Follow the pictures in order to assemble breadboard:
Attach the white wire:
Teledyne FLIR
Infrared Camera OEM
6
Equipment described herein is subject to US export regulations and may require a license prior to export. Diversion contrary to US law is prohibited.
Imagery for illustration purposes only. Specications are subject to change without notice. Rev. 100.
© 2021Teledyne FLIR LLC. Approved for public release.Teledyne FLIR Approved [FLIRGTC-SBA-005]. All rights reserved.
Attach the rst yellow wire:
Attach the second yellow wire:
Teledyne FLIR
Infrared Camera OEM
7
Equipment described herein is subject to US export regulations and may require a license prior to export. Diversion contrary to US law is prohibited.
Imagery for illustration purposes only. Specications are subject to change without notice. Rev. 100.
© 2021Teledyne FLIR LLC. Approved for public release.Teledyne FLIR Approved [FLIRGTC-SBA-005]. All rights reserved.
Attach the rst blue wire:
Attach the black wire:
Teledyne FLIR
Infrared Camera OEM
8
Equipment described herein is subject to US export regulations and may require a license prior to export. Diversion contrary to US law is prohibited.
Imagery for illustration purposes only. Specications are subject to change without notice. Rev. 100.
© 2021Teledyne FLIR LLC. Approved for public release.Teledyne FLIR Approved [FLIRGTC-SBA-005]. All rights reserved.
Attach the red wire:
Attach the green wire:
Teledyne FLIR
Infrared Camera OEM
9
Equipment described herein is subject to US export regulations and may require a license prior to export. Diversion contrary to US law is prohibited.
Imagery for illustration purposes only. Specications are subject to change without notice. Rev. 100.
© 2021Teledyne FLIR LLC. Approved for public release.Teledyne FLIR Approved [FLIRGTC-SBA-005]. All rights reserved.
Attach the second blue wire:
7 Attach Lepton camera to bread board such that it is facing outwards and that the pins occupy rows
1-8 as shown below.
Teledyne FLIR
Infrared Camera OEM
10
Equipment described herein is subject to US export regulations and may require a license prior to export. Diversion contrary to US law is prohibited.
Imagery for illustration purposes only. Specications are subject to change without notice. Rev. 100.
© 2021Teledyne FLIR LLC. Approved for public release.Teledyne FLIR Approved [FLIRGTC-SBA-005]. All rights reserved.
Setting up the Raspberry Pi
1 Gather materials.
2 Plug in the Monitor to a wall outlet using the monitor’s power cable and turn it on.
3 Take out your Raspberry Pi.
4 Check the slot underneath it to make sure the mini SD card is in place as shown in the picture.
Table des matières
