Teledelta HDS2800 Series Guide de démarrage rapide

Operation and Installation Guide

HDS2800 Series Encoder Modulator

High Definition (HD) Digital COFDM MPEG2 and H.264 Modulator with IP

Multicast.

19” Rack Mount

Revision

4.0

Firmware version

Released

File

HDS2800 Rev 4.0.Docx

HDS2800 Operation and Installation

TeleDelta is proudly an Australian owned company. File: hds2800 rev 4

www.teledelta.com Page 2 of 18

Contents

1.0 Key Features:....................................................................................................................................3

2.0 HDS2800 Rack and Wall Frames.....................................................................................................4

2.1 Indicators and Key-buttons Details................................................................................................4

2.2 Installation: ....................................................................................................................................5

3.0 Operation from the front panel..........................................................................................................6

4.0 Programming via inbuilt Web Server / NMS operation .....................................................................7

4.1 Connection and Login....................................................................................................................7

4.2 Input configuration setting .............................................................................................................8

4.2.1 Select the Input(n) setting.......................................................................................................8

4.2.2 ASI Input Setting...................................................................................................................10

4.3 NIT table setting ..........................................................................................................................12

4.3.1 Add, Set, Edit the NIT table..................................................................................................13

4.4 IP Output Setting.........................................................................................................................14

4.5 Modulator setting.........................................................................................................................15

4.6 Utilities - Save/Restore................................................................................................................16

4.7 Reboot.........................................................................................................................................18

4.8 Firmware......................................................................................................................................18

HDS2800 Operation and Installation

TeleDelta is proudly an Australian owned company. File: hds2800 rev 4

www.teledelta.com Page 3 of 18

1.0 Key Features:

•Transparent resolution pass through up to 1920x1080 and 1280x720 @ 50P/60P (1080P,

1080I and 720P resolution –depending on input modules)

•1 or 2 input modules provide up to 4 inputs (format and rate dependant)

•Input formats:

- HDMI

- HD/SD-SDI,

- Composite PAL (CVBS 576I resolution)

- ASI

•Multiple outputs:

- on coax as selectable COFDM DVB-T (MPEG 2 and H.264)

- as IP; MPTS UDP Multicast

- as ASI

•Modular design –select input modules to suit the application.

•The HDS2800 series supports HDCP, Channel naming, installer selectable LCN’s and

DVB tables.

•Front panel LCD or built-in webserver .

•Frame chassis options include wall mount

•(1HD or 2 SD inputs), and rack mount options (2+ HD and 4+ Comp input channels)

•High quality modulation MER > 42.

•Output bandwidth fully adjustable up to 27Mbps

•Individual channel rate adjustment

•Selectable:

- RF Frequency

- RF Power output,

- FEC,

- Guard Intervals

- Constellation

•HDMI modules auto switching provides redundant inputs

•Multiple HD/SD channels can be daisy-chained together to output as a single digital RF

channel or can be spread over multiple RF channels.

•The HDS2800 has an excellent cost per HD digital channel.

TeleDelta is an Australian owned company, with local engineering and support facilities in Australia

and New Zealand for more information please visit our website www.teldelta.com

HDS2800 Operation and Installation

TeleDelta is proudly an Australian owned company. File: hds2800 rev 4

www.teledelta.com Page 4 of 18

2.0 HDS2800 Rack and Wall Frames

2.1 Indicators and Key-buttons Details

Rack Mount Frame

Wall Mount Frame

LCD display

NMS port - access to internal management web

server

Power Indicator

Channel Lock light(s)

Up and down, left and right button

Enter button: for confirm

Menu button: for back step

Lock button: press to lock / unlock

Data port –IP multicast output

Alarm indicator

[

]

HDS2800 Operation and Installation

TeleDelta is proudly an Australian owned company. File: hds2800 rev 4

www.teledelta.com Page 5 of 18

2.2 Installation:

This section outlines some of the precautions users must maintain when installing, servicing and

operating the TeleDelta HDS2800 Series.

General Precautions

Operate the HDS2800 in a dry, dust free environment

Unless qualified, do not open the cover of the HDS2800, doing so may void all warranty purposes.

Exercise caution when operating any electrical device, do not operate any device unless you are

qualified to do so.

Do not stick your fingers into a light bulb socket.

HDS2800 Operation and Installation

TeleDelta is proudly an Australian owned company. File: hds2800 rev 4

www.teledelta.com Page 6 of 18

3.0 Operation from the front panel

This version of the manual is intended for setup and maintenance of the unit using the NMS web

interface.

For front panel (LCD) operation please refer to the LCD supplement –available on request

HDS2800 Operation and Installation

TeleDelta is proudly an Australian owned company. File: hds2800 rev 4

www.teledelta.com Page 7 of 18

4.0 Programming via inbuilt Web Server / NMS operation

The inbuilt web interface allows fast setting of the unit’s parameters. The web interface is required for

the setting of the LCN and NIT table as well as labelling the input for on-screen display, OSD.

4.1 Connection and Login

Connect a PC equipped with a modern browser

to the NMS port. The HDS can be connected with a

straight through cable or via a hub / switch.

Point your browser at the IP address for the unit. The IP that is set for the unit can be read at LCD

menu location 5.1.

A login interface will appear. Both of the default user name and password are admin and are case

sensitive.

After login, the Welcome system status screen will display

As at May 2102 Google Chrome 18.0.1025.168 m, and IE9.0.6 are known to work. Goodness knows what the future will hold…

Hint: To read the IP address from the LCD, press Lock key to

enter the menu tree and navigate to menu 5.1

Hint: To reset the username and password to default from the LCD, press Lock

key to enter the menu tree and navigate to menu 5.5

HDS2800 Operation and Installation

TeleDelta is proudly an Australian owned company. File: hds2800 rev 4

www.teledelta.com Page 8 of 18

4.2 Input configuration setting

4.2.1 Select the Input(n) setting.

A HDMI input card is shown below

Label

Options

Comment

Video format

User set

MPEG2 / H.264 selectable video format on certain HD (HDMI) frames

Video bit rate

User set

The range is 1~19.5Mbps*

Audio format / bit rate:,

Default

The default value is MPEG2 and 128kbps and is not normally changed

Program out enabled

User set

Turn on/off program output

Program name

User set

Enter the program name to be displayed on the TV

PMT/Video/Audio/PCR

PID.

Default

System will automatically select the default values

Encoding and video

indicators

Indication only

Green is normal, Red is fault

HDMI input: it

Indication only

Indicates if there is real-time HDMI signal present

Video format:

Indication only

the current video format of the device

Bit rate:

Indication only

the current encoding bit rate

Interface settings must be altered to reflect the input modules on the HDS-2800.

For RCA modules the interface defaults to VGA, this must be changed to RCA.

The aspect ratio for RCA input modules must also be changed to 16:9.

Repeat the setup as required for all inputs fitted (1-4).

HDS2800 Operation and Installation

TeleDelta is proudly an Australian owned company. File: hds2800 rev 4

www.teledelta.com Page 9 of 18

HDS2800 Operation and Installation

TeleDelta is proudly an Australian owned company. File: hds2800 rev 4

www.teledelta.com Page 10 of 18

4.2.2 ASI Input Setting

ASI Input

If fitted the ASI option is fitted the ASI tab will display ASI input program information as below.

In this example an incoming ASI stream carries Seven Networks DTT formats as a 20+MiB stream.

Filtering is carried out to output only 7Digital and PID 18

Label

Options

Comment

Output A - B

User set

Select the carrier output channel for the multiplexed programs. This

selection does not exist for the HDS2800 single carrier units.)

Passthrough

User set

If selected, all the input programs will pass through without any

changes.

Multiplex

User set

Enable mux to select which programs are passed through

Refresh Input

Click

Click to re scan the input stream and rebuild program list

Refresh Output

Click

Click to refresh the Output program list

Select Program

Click

Transfers input programs marked with “√”, to the output stream

Cancel Program

Click

Removes output programs marked with “√”, from the output stream

All Input

Click

Selects all the input programs with one-click.

All Output

Click

Selects all the output programs with one-click.

Parse Timeout

Default

Time limitation to parse the input stream (before TimeOut)

PID Pass

Default

Table is blank –see details below

Table des matières

Manuels Modulateur populaires d'autres marques

axing

axing AVM 5-00 Manuel utilisateur

IKUSI

IKUSI MAC-HOME HD Manuel utilisateur

Wisi

Wisi MINI OM 10 Manuel utilisateur

RCA

RCA CRF910 Manuel utilisateur

Pico Macom

Pico Macom PM45 Manuel utilisateur

FTE Maximal

FTE Maximal MODIG AIR Manuel utilisateur

Thor Broadcast

Thor Broadcast H-IP-32RF Manuel utilisateur

Delphi

Delphi SA10003 Manuel utilisateur

Elan

Elan MOD3000 Manuel utilisateur

ClearView

ClearView SD4260 Manuel utilisateur

Televes

Televes T.0X COFDM-QAM CI Manuel utilisateur

Crucial Audio

Crucial Audio Die Gotterdämmerung Manuel utilisateur

Pioneer

Pioneer CD-V61FM Manuel utilisateur

Televes

Televes 554912 Manuel utilisateur

Newtec

Newtec M6100 Manuel utilisateur

ProTelevision

ProTelevision PT 5780 Manuel utilisateur

Argent Cables

Argent Cables HD DVB-T MODULATOR Manuel utilisateur

SSS Siedle

SSS Siedle BVM 650-0 Manuel utilisateur