Telecrane F25 Manuel utilisateur

Installation & Operation Manual

F25 Industrial Radio Remote Controlle

Lee’s Hi-tech Enterprise. Co., Ltd.

Table Of Contents

Safety Considerations ------------------------------------------------------------2

Part. 1 Operator’s anual

Chapter 1 Warranty -----------------------------------------------------3

Chapter 2 Precautions Of Operation --------------------------------- 4

Chapter 3 Standard Accessories ---------------------------------------6

Chapter 4 Operation -----------------------------------------------------7

Chapter 5 Inspection and Fault Detection ---------------------------10

Part. 2 Technician’s anual

Chapter 1 General Characteristics -------------------------------------11

Chapter 2 System Configuration ---------------------------------------12

Chapter 3 Installation and Function Setting --------------------------14

Chapter 4 Software -------------------------------------------------------19

Safety Considerations

This product and related documentation must be reviewed for familiarization with

safety markings and instructions before operation.

Safety Symbols The following symbols may be found on the remote control

or throughout the remote control’s documentation.

Refer to Manual

When product is marked with this symbol refer to instruction

manual for additional information.

High Voltage

Indicates presence of hazardous voltage. Unsafe practice

could result in severe personal injury.

Warning

Denotes a hazard. Included text gives proper procedures.

Failure to follow instructions could result in severe personal

injury and/or property damage.

Caution

Denotes a hazard. Included text gives proper procedures.

Failure to follow instructions could result in minor personal

injury and/or properly damage.

Part . Operator’s Manual

Chapter Warranty

1-1 Warranty

Lee’s Hi-Tech Enterprises Co., Ltd. guarantees that this product meets its

published specifications at the time of shipment from the factory. Under proper

installation it should work as expected.

1-2 Warranty Period

This equipment is warranted against defects in material and manufacturing for a

period of one year from the date of shipment. During the warranty period,

TELECRANE is responsible for necessary repairs as long as the product can be

proved to be defective.

For warranty service or repair this product must be returned to a service facility

designated by TELECRANE. Buyer will pay shipping charges to TELECRANE

while TELECRANE will pay return shipping charges.

1-3 Excluded Items

This warranty does not include consumptive parts such as batteries, fuses, buttons,

and relays. Also this warranty does not cover defects caused by improper

installation, improper or insufficient maintenance, unauthorized modification,

improper operation, ignorance of environmental specifications, or improper

software or interfacing.

1-4 Remarks

◎

No other warranty is expressed or implied, except for the above mentioned.

◎ The remedies provided herein are the buyer’s sole and exclusive remedies.

TELECRANE shall not be liable for any direct, indirect, special, incidental or

consequential damages.

Chapter 2 Precautions of Operation

2- Attention

◎

Please carefully read the manual before installing and operating this device.

◎

Due to the complex nature of this equipment it is necessary to read the entire

manual before installation.

◎

Never dismantle the equipment by any unauthorized personnel, or equipment may

be damaged.

◎

This manual is for reference only. Pleases consult your distributor for further

assistance.

◎

The equipment has been strictly tested for quality before delivery from our plant.

However, this equipment must not be used in dangerous situations or where

damage may result.

◎

After operation, shut off main power to the crane, power to receiver, and remove

transmitter key.

◎

Transmitter should be placed in a safe area when not in use to avoid accidental

pressing of buttons.

◎

The crane should be equipped with main power relay, limit switch and other safety

devices.

◎

Don’t use equipment during lightening or high electrical interference conditions.

◎

ake sure that the batteries are in good condition and power for receiver is correct.

◎

aintenance should only be done while the crane’s main power is off to prevent

electrical shock.

◎

The contents of this manual may be amended by the manufacturer without notice.

◎

The manufacturer may introduce new functions to the equipment as necessary,

therefore, the descriptions may change.

2-2 Precautions

☆ Operating in an industrial facility is relatively dangerous; therefore, operator must

have taken the adequate trainings in using F25 system.

☆ Those who operate the machine should be healthy and have good judgment in

regard to safety.

☆ Although the F25 transmitter is so durable and resistant for the fluctuating

temperature, care still need be taken to prevent it from the severe impact or

pressure.

☆ During operation, if the power supply of the transmitter’s batteries is insufficient,

the transmitter will send out E S signal first to de-energize all of motion relays

inside the receiver to stop crane’s moving, and then the LED indicator on

transmitter will flash in red constantly. At this moment, the batteries need to be

replaced and all of four batteries should be replaced at the same time.

☆ If the severe interference occurred the equipment should be stopped at once.

☆ Please take the batteries out when the equipment will not be used for a long time.

☆ Be sure to know the “Procedures of Emergency “ as follows.

2-3 Procedures of emergency

In case of an Emergency, please follow the steps below and ask the distributor for

service immediately.

1. Press "E S" button.

2. Turn the key to "OFF" position and remove it.

3. Switch off the main power of crane.

4. Advise the distributor to find out the reason.

Chapter 3 F25 Standard Accessories

When you acquire a standard and full set of F25 system, it includes the following

items.

(1)Transmitter, one unit.

(2)Receiver, one unit.

Chapter 4 Operation

4- F25 Transmitter’s parts

Antenna

Rotary K

E S Button

LED Indicator

otion

Buttons

Battery Cover

Start Button

Horn Button

Autres manuels pour F25

Table des matières

Autres manuels Telecrane Télécommande

Telecrane

Telecrane F24-12S Manuel utilisateur

Telecrane

Telecrane F24 Series Manuel utilisateur

Telecrane

Telecrane F24+ Series Manuel utilisateur

Telecrane

Telecrane F21-E2 Manuel utilisateur

Telecrane

Telecrane F21-E1 Manuel utilisateur

Telecrane

Telecrane F24-60N Manuel utilisateur

Telecrane

Telecrane F21-2S Manuel utilisateur

Telecrane

Telecrane F21-12S Manuel utilisateur

Manuels Télécommande populaires d'autres marques

Panasonic

Panasonic EUR7622KB0 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen Beo4 Manuel utilisateur

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manuel utilisateur

Multiplex

Multiplex PROFI TX 9 Manuel utilisateur

One Remote

One Remote RMB4 Manuel utilisateur

FUTABA

FUTABA 9ZAP - PART2 Manuel utilisateur

HR Matic

HR Matic HR MULTI 3 Manuel utilisateur

Yamaha

Yamaha ACC-GNRST-30-20 Manuel utilisateur

EisSound

EisSound KBSOUND Manuel utilisateur

Marantz

Marantz RC101 Manuel utilisateur

Conrad

Conrad FS20 TC6 Manuel utilisateur

Anritsu

Anritsu MP1777A Manuel utilisateur

Niles

Niles WVC100 Guide de dépannage

RCA

RCA RCU1300 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen BEO6 Manuel utilisateur

GE 94901 Manuel utilisateur

Onbon

Onbon YQ1-75 Manuel utilisateur

FUTABA

FUTABA R7108SB Instructions d'installation