TeleAdapt DeskPoint Pro TA-8050 Manuel d'utilisation

!"#"$%&'()*"+,-./0()-1.)2+"1)3&04&#) ) 5"1+/.0)6787966)

)

DeskPoint Pro™

User and Installation Manual

TA -6950

TA -7950

TA -8050

)

Keeping Your World Connected2

!"#"$%&'()*"+,-./0()-1.)2+"1)3&04&#) ) 5"1+/.0)6787966)

)

Table of Contents

:;$!2<;=88888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888 >!

LED DEFINITIONS 888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888 ?!

CONNECTIONS 88888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888 @!

HARDWARE RESET 8888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888 @!

AB=!$CCABD)$B*)EFB:AD2<ABD)*;=G-FAB!)-<F888888888888888888888888888888888888888888 H!

PREPARING FOR CONFIGURATION 8888888888888888888888888888888888888888888888888888888888888888888888888888888888888 H!

CONNECTING THE MANAGING COMPUTER8888888888888888888888888888888888888888888888888888888888888888888888888 H!

CHANGING THE TCP/IP SETTINGS OF THE MANAGING COMPUTER8888888888888888888888888888888888 H!

DEFAULT USER NAME AND PASSWORD 88888888888888888888888888888888888888888888888888888888888888888888888888888 I!

J;K)EFB:AD2<$!AFB8888888888888888888888888888888888888888888888888888888888888888888888888888888888 69!

SUMMARY 8888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888 69!

Menu Structure .......................................................................................................... 11!

Apply Changes, Reset, Reboot and Continue Commands .................................12!

Refresh and Clear Commands................................................................................ 12!

Logout Commands .................................................................................................... 12!

FIRMWARE TOOLS 888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888 6L!

Upgrading Firmware by HTTP or TFTP .................................................................14!

Load Settings by HTTP or TFTP............................................................................. 14!

Save Settings by HTTP or TFTP............................................................................. 15!

Resetting Configuration to Factory Defaults.......................................................... 15!

SYSTEM SETTINGS 88888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888886M!

Web Management – Secure and Idle Timeout ....................................................... 15!

!"#"$%&'()*"+,-./0()-1.)2+"1)3&04&#) ) 5"1+/.0)6787966)

)

SYSTEM TOOLS 888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888 6?!

Ping ........................................................................................................................ 16!

Arping ........................................................................................................................ 17!

Traceroute.................................................................................................................... 17!

TIME ZONE SETTINGS 88888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888 6H!

NTP Settings................................................................................................................ 18!

Periodic Reboot........................................................................................................... 19!

SNMP 88888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888 6I!

SNMP V1 &V2 ............................................................................................................. 19!

SNMP V3 Settings ...................................................................................................... 19!

SNMP TRAP TABLE FOR V1 &V2 8888888888888888888888888888888888888888888888888888888888888888888888888888888 79!

CONFIGURING TCP/IP RELATED SETTINGS8888888888888888888888888888888888888888888888888888888888888888888888 76!

LAN…........................................................................................................................... 21!

VLAN Tag..................................................................................................................... 22!

CONFIGURING IEEE 802.11-RELATED SETTINGS 888888888888888888888888888888888888888888888888888888888888 7L!

Basic Settings .............................................................................................................. 23!

Advanced Setting ........................................................................................................ 25!

Security+……………………................................................................................................... 26!

VIEWING STATUS8888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888 L7!

Network Status Table .................................................................................................32!

Syslog ........................................................................................................................ 32!

Network Status ............................................................................................................ 33!

!;ENBAE$C)=2--F<! 888888888888888888888888888888888888888888888888888888888888888888888888888888888888L>)

$--;B*AO)$P)*;:$2C!)=;!!ABD=888888888888888888888888888888888888888888888888888888888888888888 LM!

!"#"$%&'()*"+,-./0()-1.)2+"1)3&04&#) ) 5"1+/.0)6787966)

)

1. Features

The DeskPoint Pro is designed for use in hotel rooms and combines 802.11n, IEEE 802.11g and

IEEE 802.11b wireless technology to provide the best wireless performance, enabling client

computers to access the resources on the hotel Ethernet network. With the Web-based user

interface or SNMP a network administrator can easily and clearly manage the DeskPoint Pro.

)

Desktop or Under Desk

Desktop -The TA-6960 and TA-7950 are on desk models. The TA-6950 incorporates a

retractable spool whereas the TA-7950 has a RJ45 socket.

Under Desk -The TA-8050 is designed to fit unobtrusively under the a desk in the

guest room and can be used in conjunction with other TeleAdapt cable management

products.)

)

IEEE 802.11n

RF type selection - The RF type of the wireless interface can be configured to work in

IEEE 802.11n only , IEEE 802.11b only, IEEE 802.11g only, or mixed mode (802.11n,

802.11g and 802.11b simultaneously).

64-bit and 128-bit WEP (Wired Equivalent Privacy) -For authentication and data

encryption.

Enabling/Disabling SSID broadcasts -The administrator can enable or disable the

SSID broadcasts functionality for security reasons. The correct SSID has to be

specified on client computers.

IEEE 802.1x/RADIUS - The DeskPoint Pro can be configured to authenticate wireless

users and distribute encryption keys dynamically by IEEE 802.1x Port-Based Network

Access Control and RADIUS (Remote Authentication Dial-In User Service).

!"#"$%&'()*"+,-./0()-1.)2+"1)3&04&#) ) 5"1+/.0)6787966)

)

WPA (Wi-Fi Protected Access) -The DeskPoint Pro supports the WPA standard

proposed by the Wi-Fi Alliance (HQ(('PRRSSS8S/TU/8.1VH). Both WPA-PSK (Pre-Shared

Key) mode and full WPA mode are supported. WPA is composed of TKIP (Temporal Key

Integrity Protocol) and IEEE 802.1x and serves as a successor to WEP for better WLAN

security.

WPA2 (Wi-Fi Protected Access 2) -This advanced protocol implements the mandatory

elements of 802.11i. WPA2 is an improvement on the WPA-PSK standard, and is simply

using a shared password for access to your network. Only users with this password can

access your network.

Client isolation -Wireless-to-wireless traffic can be blocked so that the wireless clients

cannot see each other. This function also blocks wired clients from accessing Wireless

clients.

Transmit power control -Transmit power of the DeskPoint Pro’s RF module can be

adjusted to change RF coverage.

Associated wireless clients status -The DeskPoint Pro can show the status of all

wireless clients that are associated with it.

HDHCP Client -The DeskPoint Pro can automatically obtain an IP address from a DHCP

server.

HPacket Filtering.HThe DeskPoint Pro provides Layer 2, Layer 3, and Layer 4 filtering

capabilities.

Firmware Tools

Firmware upgrade -The firmware can be upgraded by HTTP (Hyper Text

Transfer Protocol).

!"#"$%&'()*"+,-./0()-1.)2+"1)3&04&#) ) 5"1+/.0)6787966)

)

Configuration backup -The configuration settings can be backed up to a file via

HTTP for later restoring.

Configuration reset -Resetting the configuration settings to factory-default values.

Management

Web-based Network Manager for configuring and monitoring the DeskPoint Pro

via a Web browser (Internet Explorer,Firefox or Google Chrome). The management

protocol is HTTP (Hyper Text Transfer Protocol)-based.

SNMP -SNMP (Simple Network Management Protocol) MIB I, MIB II, IEEE 802.1d,

IEEE 802.1x, and Private Enterprise MIB are supported.

System log - For system operational status monitoring.

-Local log - System events are logged to the on-board RAM of the DeskPoint

Pro and can be viewed using a Web browser.

-Remote log by SNMP trap -Systems events are sent in the form of SNMP

traps to a remote SNMP management server.

Power Charging

USB Charging 5V for charging mobile devices

LED Definitions

TA-6950 and TA-7950 -At the front of the device, there are 3 LED indicators. See

Figure 1 below for description of each LED indication.

TA-8050 -On top of the device, there are LED indicators. See Figure 2 below for

description of each LED indication.

!"#"$%&'()*"+,-./0()-1.)2+"1)3&04&#) ) 5"1+/.0)6787966)

)

Connections

The TA-6950 and TA-7950 also provide a wired Guest LAN interface just above the

indicator LEDs. For the TA-6950 this is a retractable spool, for the TA-7950 this is an RJ45

socket. Both models also provide a USB socket that can provide up to 5V/1A for charging

mobile devices. See Figure 3 to the left.

TA-8050 provides an RJ45 jack to be used for offering a wired access point for the guest.

Pair a TeleAdapt Pull-Through Pro or other Internet AP product for best presentation to the

guest. See Figure 4 to the left.

Hardware Reset

The reset button can be found on the bottom of the unit. To perform a factory reset press and hold the

reset button until the LAN LED flashes. When the LAN LED flashes release the reset button and quickly

press and hold the reset button a second time (for at least 10 seconds) until the LAN LED flashes

again.

)

!"#"$%&'()*"+,-./0()-1.)2+"1)3&04&#) ) 5"1+/.0)6787966)

)

2. Installing and Configuring DeskPoint Pro

This section offers information about installing your DeskPoint Pro. Before configuring the DeskPoint

Pro, you need to know the connection information supplied by your service provider and the field

application environment.

)

Preparing for Configuration

To c o n f i g u r e the DeskPoint Pro, a computer with a web browser is needed. For the first-time or

maintenance configuration of the DeskPoint Pro, an Ethernet network interface card (NIC) should have

been installed in the managing computer.

Since the configuration/management protocol is HTTP-based, you have to make sure that the IP

address of the managing computer and the IP address of the managed DeskPoint Pro are in the same

IP subnet (the default IP address of the DeskPoint Pro is 192.168.0.1 and the default subnet mask is

255.255.255.0.)

)

Connecting the Managing Computer

Using Ethernet Cable to connect the managing computer and the Wireless 11n Access Point as

following figure shows. One end of the Ethernet cable must be plugged into the Hotel LAN Ethernet

jack of the DeskPoint Pro for configuration.

)

Changing the TCP/IP Settings of the Managing Computer

Use the Windows Network Control Panel Applet to change the TCP/IP settings of the managing

computer, so that the IP address of the computer and the IP address of the DeskPoint Pro are in the

same IP subnet. Set the IP address of the computer to 192.168.0.xxx (the default IP address of the

DeskPoint Pro is 192.168.0.1) and the subnet mask to 255.255.255.0.

Fig 1. An example of Internet Protocol

(TCP/IP) Properties in Microsoft Windows

Note: For some versions of Windows, the

computer needs to be restarted for the

changes of TCP/IP settings to take effect.

!"#"$%&'()*"+,-./0()-1.)2+"1)3&04&#) ) 5"1+/.0)6787966)

)

Default User Name and Password

The default user name is ‘root’ and the default password is ‘root’.

)

!"#"$%&'()*"+,-./0()-1.)2+"1)3&04&#) ) 5"1+/.0)6787966)

)

69)

3. Web Configuration

NOTE: All management services on the DeskPoint Pro are restricted so they are only accessible via the

Hotel LAN port.

)

Summary

)

Fig 1. The Summary page

Ce manuel convient aux modèles suivants

Table des matières

Manuels Point d'accès sans fil populaires d'autres marques

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuel utilisateur

Ubiquiti

Ubiquiti NanoStation NSM2 Manuel utilisateur

Cisco

Cisco Aironet 1550 Series Manuel utilisateur

Aruba

Aruba IAP-335 Manuel utilisateur

Advantek Networks

Advantek Networks AWN-AP-54MR Manuel utilisateur

IP-COM

IP-COM AP355 Manuel utilisateur

Buffalo

Buffalo AirStation WLA-L11G Manuel utilisateur

EnGenius

EnGenius EnStationACv2 Manuel utilisateur

D-Link

D-Link DAP-3662 Manuel utilisateur

xG Technology

xG Technology xMax CN1300 Manuel utilisateur

Widelink

Widelink ezWave WAP-1100 Series Manuel utilisateur

Edimax

Edimax CAP1200 Manuel utilisateur

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuel utilisateur

Aruba

Aruba AP-203R Manuel utilisateur

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuel utilisateur

CreatComm

CreatComm TB5F Manuel utilisateur

SineDigital

SineDigital MW-1500AP(H) Manuel utilisateur

TP-Link

TP-Link AP9650 V1 Manuel utilisateur