TEKTELIC Communications TUNDRA Manuel utilisateur

TEKTELIC TUNDRA Sensor:

Quick Start Guide

BEFORE YOU START

Ensure the device is comissisioned on your network server before activation

For assistance please visit http://www.support.tektelic.com

Activating the Device

The device is shipped with the batteries installed and in a state of DEEP-SLEEP until activated with a magnet.

There is no need to open the enclosure to activate the device.

To activate the device, move the provided magnet close to the magnet symbol at the bottom of the enclosure

using a specific switch pattern:

Magnetic Pattern to Activate or Reset Device

Step 1: Bring Magnet within 2cm of Magnet Symbol on

device (see picture) for more than 3 seconds but less than 10

seconds.

Step 2: Remove Magnet away from Device. LED will blink

until device has joined Network Server.

Note:

•This magnetic pattern always triggers a module reset, even during normal operation.

•LED will blink for every message sent to Network Server.

Magnet Symbol

LED

Activation Troubleshooting

If the device remains blinking green for more than two minutes follow these

troubleshooting actions:

•Ensure the device is provisioned on the Network Server

•Ensure the local LoRa Gateway has also been provisioned on the Network Server

•Ensure a local LoRa Gateway is online

Note:

If you have questions about using this device please visit the TEKTELIC Support Portal

support.tektelic.com for access to our knowledge base.

FCC Certification information can be found on the Long Form User Guide available on

the TEKTELIC Support Portal at support.tektelic.com

www.tektelic.com

The default data reporting periods are listed in Table 1. To make changes to the

default data reporting periods, please refer to the knowledge base on the

support portal at support.tektelic.com

Configuration & Customization

Table 1: Default Reporting Periods of the TUNDRA Sensor

Application Solution: LeapX

This device is by supported by the TEKTELIC LeapX Application

To use LeapX, you will need a TEKTELIC Account. If you don’t have an account already, please

raise a ticket in our support portal support.tektelic.com and our support team will create an

account for you.

To install LeapX Application on your Smart Device, please search for “TEKTELIC LeapX” on the

Google Play Store or the Apple App Store. Once the app is installed, log in to the app using the

username and password of your TEKTELIC account. Then follow the in-app instructions.

online

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels TEKTELIC Communications Accessoires

TEKTELIC Communications

TEKTELIC Communications T0004437 Manuel utilisateur

TEKTELIC Communications

TEKTELIC Communications T0006623 Manuel utilisateur

TEKTELIC Communications

TEKTELIC Communications T0005982 Manuel utilisateur

TEKTELIC Communications

TEKTELIC Communications Kona Manuel du produit

TEKTELIC Communications

TEKTELIC Communications T0004893 Manuel du produit

TEKTELIC Communications

TEKTELIC Communications TUNDRA Manuel utilisateur

TEKTELIC Communications

TEKTELIC Communications Kona All-in-One Home Sensor Manuel utilisateur

TEKTELIC Communications

TEKTELIC Communications Kona All-in-One Home Sensor Series Manuel utilisateur

TEKTELIC Communications

TEKTELIC Communications Kiwi Manuel utilisateur

Manuels Accessoires populaires d'autres marques

Hillco

Hillco 2810 Manuel utilisateur

Siemens

Siemens QSA2700D Manuel de l'opérateur

Contours

Contours ZY024 Manuel utilisateur

Saivod

Saivod VS621 Manuel utilisateur

Virtuox

Virtuox VirtuCLEAN 2.0 Manuel utilisateur

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuel utilisateur

Z-Wave

Z-Wave HSD-200Z Manuel utilisateur

turck

turck FMX-IM-2UPLI63FX Manuel utilisateur

Decagon Devices

Decagon Devices 10HS Manuel utilisateur

UPPAbaby

UPPAbaby Cup Holder Manuel utilisateur

Elko

Elko SmartSensor Leakage Wireless Manuel utilisateur

Grizzly

Grizzly H8371 Manuel utilisateur

Panasonic

Panasonic HG-T Series Manuel utilisateur

IFM Electronic

IFM Electronic Efector 250 Series Guide de référence

DigiDesign

DigiDesign 888/24 I/O Manuel utilisateur

PROZIS

PROZIS QUAY Manuel utilisateur

patagonia

patagonia PSI Vest Manuel utilisateur

SFC Energy

SFC Energy EFOY GO! Manuel utilisateur