IPC-3,
IPC-5
U
SER
M
ANUAL
R
EV
.
2.03
6
T
EKNIC
,
I
NC
.
P
HONE
(585)784-7454
S
AFETY
I
NFORMATION
IMPORTANT: Read this section before attempting to install, apply
power to, or operate an IPC power supply. Failure to understand and
follow the information presented in this document could result in
property damage, bodily injury, and/or death.
P
RECAUTIONARY
S
TATEMENT
Always follow appropriate safety precautions when installing and using
any power supply. Equipment should be designed and utilized to prevent
personnel from coming into contact with moving parts and electrical
contacts that could potentially cause injury or death. Read all cautions,
warnings and notes before attempting to operate or service power supplies
and motion control devices. Follow all applicable codes and standards
when using this equipment. Failure to apply this equipment as described
may impair or neutralize protections built into the product.
G
ENERAL
D
ISCLAIMER
The User is responsible for determining the suitability of this product for
their application. The User must ensure that Teknic’s products are
installed and utilized in accordance with all local, state, federal and
private governing bodies and meet all applicable health and safety
standards.
Teknic has made all reasonable efforts to accurately present the
information in the published documentation and shall not be responsible
for any incorrect information which may result from unintentional
oversights.
Due to continuous product improvements, the product specifications as
stated in the documentation are subject to change at any time and without
notice. The User is responsible for consulting a representative of Teknic
for detailed information and to determine any changes of information in
the published documentation.
Should Teknic’s products be used in an application that is safety critical,
the User must provide appropriate safety testing of the products, adequate
safety devices, guarding, warning notices and machine-specific training to
protect the operator from injury.
