Tekkeon ezTalker ET3000 Manuel utilisateur
ET3000
User Guide
Bluetooth Headset
with OLED Display
USER GUIDE
Contents
Overview ..........................................................................................................................................................2
Getting Started..................................................................................................................................................2
Unpacking ezTalker digital ..........................................................................................................................2
Getting to Know ezTalker digital ..................................................................................................................3
Setting Up ezTalker digital ..............................................................................................................................4
Charging ezTalker digital..............................................................................................................................4
Pairing ezTalker digital to Your Mobile Phone ............................................................................................5
Wearing ezTalker digital.............................................................................................................................. 6
Using ezTalker digital ......................................................................................................................................7
Powering ezTalker digital ............................................................................................................................ 7
Understanding the Display ..........................................................................................................................7
Making Calls ................................................................................................................................................9
Receiving Calls ..........................................................................................................................................11
Ending Calls .............................................................................................................................................. 12
Transferring Calls...................................................................................................................................... 12
Browsing the Phone Book ........................................................................................................................13
Enabling Caller ID/Name............................................................................................................................13
Adjusting the Volume ................................................................................................................................14
Muting ezTalker digital ..............................................................................................................................14
Visual and Audible Indicators ......................................................................................................................15
Visual Indicators ........................................................................................................................................15
LED Status Indicators ................................................................................................................................16
Audible Indicators......................................................................................................................................16
Troubleshooting..............................................................................................................................................17
Limited Warranty............................................................................................................................................19
Disclaimer of Warranties ..........................................................................................................................19
FCC Statement for a Class B Digital Device ................................................................................................20
Customer Support ..........................................................................................................................................21
2
Overview
ezTalker™digital by Tekkeon is a Bluetooth®headset with a unique OLED digital display
that lets you cut loose from your Bluetooth mobile phone. With advanced features like
stored number redial, last number redial and voice dialing, you can use the headset to
make and receive calls without every touching your mobile phone. You can even access
and dial from your mobile phone book for some mobile phones.
While using your ezTalker digital headset, you can store your mobile phone in your
pocket, backpack, or briefcase—just about anywhere in close proximity that is convenient
for you.
ezTalker digital is designed with Bluetooth v1.2 technology, and is backward compatible
with all Bluetooth v1.1 devices.
Getting Started
Unpacking ezTalker digital
Your ezTalker digital package includes
the following:
ezTalker digital Headset
and Earpiece
Power Adapter
Getting to Know ezTalker digital
3
USER GUIDE
VOLUME DOWN Button
Decreases the speaker volume, initiates
last number redial and call waiting, and
enables scrolling through phone book
OLED Digital Display
Provides caller ID and call status, and visual
indication of audio and headset connection,
volume level, and headset battery level
VOLUME UP Button
Increases the speaker volume,
mutes/unmutes the microphone,
and enables scrolling through
stored numbers
Earhook
Houses battery, and
can be positioned to be
worn on either ear
Charging LED
Indicates when headset
is being charged
TALK Button
Used to turn headset on/off,
pair, and make/receive calls
Blue LED
Provides visual indication
of headset status
Charging Jack
Input for power adapter to
charge the headset
4
Setting Up ezTalker digital
Before using ezTalker digital, you must:
•Charge ezTalker digital
•Pair ezTalker digital to your mobile phone
•Adjust ezTalker digital to your ear preference
Directions for each of these activities are provided in the following three sections. Once these steps are
completed, you will be ready to use ezTalker digital!
Charging ezTalker digital
Before using ezTalker digital, you must charge the headset for a minimum of two hours. When fully
charged, the battery provides up to five hours of talk time and up to 120 hours of standby time.
The batterystatus icon, and a beep heardevery32 seconds will indicate a low battery(less than 10%
of capacity).
To Charge the Headset
1. Plug the power adapter into the charging jack on the side of the earhook.
2. Plug the power adapter into a wall outlet. The green charging LED on the
headset will light while the headset is charging. When the headset is fully
charged, the battery icon will indicate full and the green LED will
turn off.
3. Unplug the power adapter from the wall outlet and the headset.
NOTE: The battery can be charged when the earhook is either connected to or
disconnected from the headset.
5
USER GUIDE
Pairing ezTalker digital to Your Mobile Phone
Pairing is the process of linking the headset with your Bluetooth mobile phone or other Bluetooth device
that supports a headset and/or handsfree profile. Before using ezTalker digital with your mobile phone
you must pair the devices. After this process is complete, you can use the headset with your paired
mobile phone.
You can pair ezTalker digital with up to seven Bluetooth devices. Once each device is paired with the
headset, you must disconnect the paired phone or device to connect to a different phone or device. While
connected to a different paired device, ezTalker digital will not be connected to other paired devices.
BEFORE YOU PAIR THE HEADSET, ENSURE THAT THE BATTERY IS FULLY CHARGED, AND REVIEW
THE INSTRUCTIONS IN YOUR MOBILE PHONE USER GUIDE FOR PAIRING YOUR MOBILE PHONE TO A
BLUETOOTH HEADSET.
To Pair the Devices
1. Turn on the mobile phone/device and place it next to the headset.
2. Initiate the Bluetooth device-pairing (discovery) feature on the mobile phone/device. Refer to the
mobile phone/device user guide for instructions on initiating this feature.
3. With the headset turned off, press and hold the TALK button until “Pairing”
appears on the display (approximately five seconds).
4. Release the TALK button. The headset is now in pairing mode.
5. Follow the mobile phone/device prompts, and when prompted for the passkey
(also called passcode or BT PIN), enter 0000 (the ezTalker digital passkey).
When pairing is complete, the headset will be placed in standby mode, ready
to make and receive calls. “Ready” will appear on the display, and the blue LED
will flash at two-second intervals.
6
To Cancel Pairing Mode
While you are in pairing mode, you can cancel the pairing process and turn off the headset.
1. While in pairing mode, press and hold the TALK button approximately three seconds until “Off”
appears on the display and the headset turns off.
Wearing ezTalker digital
ezTalker digital is designed to fit comfortably in your ear. The earhook
can be positioned to be worn on the right or left ear. The battery is
housed in the earhook, so the earhook must be connected to use the
headset.
To Place the Headset on Your Ear
1. Hook the earhook over the top of your ear, and place the speaker
in your ear with the tip of the headset angled toward your mouth.
To Change the Direction of the Earhook
1. Holding the stem of the earhook, gently pull the earhook from the
headset.
2. Insert the earhook into the hole on the opposite side of the headset.
For right ear
For left ear
7
USER GUIDE
Using ezTalker digital
Powering ezTalker digital
To Turn On the Headset
1. Press and hold the TALK button approximately four seconds until “On”, then
“Standby” appears on the display, or until you hear the ON tone. The headset
turns on and is placed in standby mode, ready to make and receive calls.
Note: To conserve power, the display will turn off after being idle for 18 seconds.
To view the display, simply press any button.
To Turn Off the Headset
1. With both the headset and the display turned on, press and hold the TALK button approximately four
seconds until “Off” appears on the display and the headset turns off, or until you hear the OFF tone.
Understanding the Display
The display is made up of four sections including status icons, caller ID, caller name, and headset status.
Asample display is shown on page 8.
8
The icons in the first two positions will change according to the mode. Following is a description of
the icons:
Headset has no audio connection/Headset is in talk mode
Headset is in standby mode/Headset is in talk mode
Volume level
Battery level
7148321266
Tekkeon
Ring...
Icons
Caller ID
Caller Name
Status
Autres manuels pour ezTalker ET3000
1
Table des matières
Autres manuels Tekkeon casque
Tekkeon
Tekkeon ezTalker ET1000 Manuel utilisateur
Tekkeon
Tekkeon ezTalker mini ET2000 Manuel utilisateur
Tekkeon
Tekkeon ezTalker mini ET2000 Manuel utilisateur
Tekkeon
Tekkeon ezTalker ET3000 Manuel utilisateur
Tekkeon
Tekkeon ezTalker ET1000 Manuel utilisateur
Tekkeon
Tekkeon ezTalker mini ET2000 Manuel utilisateur
Tekkeon
Tekkeon ezTalker mini ET2000 Manuel utilisateur
