9
Cleaning & Maintenance Guidelines
Cleaning and maintenance should be carried out by service personnel only, after
ensuring that the unit is disconnected from the power supply. It is recommended
that cleaning be carried out regularly every week.
A) Cleaning the unit body
1. Simply wipe down the exterior of the dryer with a damp cloth, removing any
build of up dirt, paying particular attention to the sensor.
B) Maintenance of absorbent ceramic surface
1. Remove the security xings and lift o the outer casing.
2. Slide out ceramic plate from rear of casing.
3. Wash ceramic plate with warm soapy water and remove any soap residue before
drying with a clean cloth.
4. Avoid cleaning with products that contain bleach, hydrochloric acids or chlorides.
5. Avoid stainless steel cleaner from making contact with ceramic as it can stain
ceramic. Avoid use of oily cleaners to prevent ceramic pores from clogging.
6. Avoid use of steel wool wvhich can scratch surface.
7. Replace ceramic plate and ret outer casing.
C) Cleaning the air lter
1. Remove the air lter component.
2. For a light clean – use a vacuum cleaner to remove any build of dirt. For a more
thorough clean – soak the air lter in warm water.
3. Replace the air lter back within the body.
