TECOR TR-508X Manuel utilisateur
PAPER SHREDDER
Instruction Manual
Model: TR-508X
Important: Please read the following instructions carefully before
operating the shredder and retain this manual for future use.
1
PRODUCT OVERVIEW
AUTO
OFF
REV
AUTO - Shredder in standby
mode, shredding will start when
paper sheets are inserted into
the paper entry
OFF - Shredder is off and will not
run
REV - Shredder will rotate in
opposite direction, forcing paper
to exit at top
A - Function switch (AUTO/OFF/REV)
B - Paper entry
C-Shredder head
D-Waste bin
2
Model
TR-508X
Features
Shreds paper and credit cards
Weight
4KG
Shred Type
Cross Cut
Capacity
8 Sheets (A4 80gsm)
Waste Bin Volume
15L
Avg. Particle Size
5mm x 38mm
Dimension
315mm(H) x 195mm(W) x 356mm(D)
Paper Entry Width
220mm
Duty Cycle
2 min. ON 40 min. OFF
Noise Level
≤72dB Load
Motor Power
340W
Voltage
220~240V 50Hz
Current
1.5A
WARNING
Safety First
Do not insert fingers into
opening
Read the entire
instruction manual before
operating the shredder
Keep ties and loose clothing
clear
Keep children away from
the machine. This
machine is not intended
for use by children
Keep loose jewellery clear
No staples
Keep long hair clear
No paper clips
No aerosols. Do not spray
cleaners or lubricants, as these
may present a risk of fire.
PRODUCT SPECIFICATIONS
3
IMPORTANT SAFETY WARNINGS
Please read the following carefully before use.
•
Do not immerse the shredder in water or any other liquid
•
Do not operate the shredder with a damaged cord or plug, after any
malfunctions, or after damage in any manner.
•
Do not exceed the maximum recommended number of sheets when feeding paper into
the shredder.
•
Do not shred plastic films, adhesive paper or labels, clothing or plastic
•
Do not put paper clips or staples into the shredder to avoid damaging the
blades.
•
Always unplug the shredder before cleaning the waste bin.
•
A full waste bin may lead to a paper jam, empty waste bin before it is full.
•
Unplug the shredder if not in use for extended periods of time.
•
Keep ties, jewelry, hair, fingers etc. away from the shredder paper entry for
safety purposes.
•
Avoid touching the paper entry with hands or fingers.
•
Keep aerosol products away from the shredder as these can damage the motor
and present a risk of fire.
•
Do not place the shredder near any heat source or in a humid environment.
•
Keep the shredder far away from areas frequented by children and pets.
•
This product is not intended for use by children.
OPERATION GUIDE
1.
Read and follow all the safety instructions before using the shredder.
2.
Make sure that the shredder head is resting securely on top of the waste bin.
3.
Plug the power cord into an electrical outlet.
4.
Turn the switch to “AUTO” position, and the shredder will be in standby mode.
5.
Insert thepaper or credit card verticallyinto the entry, the shredder should begin
shredding.
6.
After the shredding, the shredder will return to standby mode.
OVERHEAT PROTECTION
Duty cycle of this shredder: 2min on 40min off
•
Continuous use of the shredder may cause the motor to exceed normal operating
temperature and trigger the overheat protection which will cause the motor to shut off
•
Simply unplug the shredder power cord from the electrical outlet and allow
the motor to cool (approximately 40 minutes for a complete cool-down). The
motor will return to normal operation afterwards.
4
DISPOSAL OF WASTE
1.
Unplug the power cord from the electrical outlet.
2.
Remove the shredder head from the waste bin by lifting the handle straight up.
3.
Empty the waste bin.
4.
Replace the shredder head on the wastebin.
5.
Plug the power cord back into the outlet.
CLEARING PAPER JAMS
1.
Turn the switch to “REV” position.
2.
The shredder will rotate in opposite direction expelling any jammed paper
out.
3.
Pull out the paper carefully to clear the paper entry, and turn the switch backtothe
“AUTO”position.
4.
Reduce the number of sheets to be shredded for the first pass after the clearing.
TROUBLESHOOTING
Abnormities
Cause
Countermeasure
After finishing
normal shredding,
the shredder does
not return to
standby mode
Too much scrapped
paper in the waste
bin, so that the
scrapped paper
cannot fall and leave
the exit.
Cut off the power, and
empty the waste bin, press
the scrapped paper down
to keep them away from
the machine head.
The Paper feed is
working, but there
are still some
scrapped paper
hanging at the exit
after finishing
The slots of the
blades are clamping
onto the scrapped
paper.
Set the switch to "REV" for
the scrapped paper to exit
from the top (if needed,
please unplug the power
and clean the scrapped
paper at the exit).
The shredder does
not work after
withdrawing the
paper
The scrapped paper
is blocking the
sensor.
Set the slide switch to
"REV" for the paper to exit
from the top
5
Paper is fed into
the entry, but the
shredder does not
work
Paper is not
touching the sensor.
Adjust the angle of the
paper fed into the shredder
to ensure that it touches
the sensor.
The paper is
jammed, and the
machine stops
rotating.
The number of
paper sheets
inserted exceeds the
maximum capacity.
Or
The jam made the
motor overheat and
triggered the
overheat protection.
Set the switch to "REV" and
withdraw the shredding
paper.
Or
Unplug and allow the
machine to cool down.
The machine
doesn't start after
inserting a sheet of
paper, or stops
running when
paper is being
inserted.
The paper is too
thin, too soft, too
crinkly, or humid to
activate automatic
inductive device.
1.
Set the switch to
“REV”to clear the
paper entry
2.
Set the switch back to
“AUTO”, fold the
paper and insert
again.
6
Warranty
Valid for Australian customers only
TECOR warrants that this product will be free from defects and work as
intended for the period of 12 months starting from the date of purchase by the
original customer. If the product has any defects or does not work as intended
during the warranty period, Tecor will, at its election and at its expenses, repair
or replace the product.
This warranty does not apply:
•
where the defect is a result of misuse, abuse, accident, alteration or neglect;
•
where the product has not been used in accordance with all provided
instructions;
•
where the product has been intentionally or negligently damaged;
•
where the customer has attempted to change or repair the product;
•
to damages arising from fair wear and tear
To make a claim under this warranty, please return your product with your
receipt or proof of purchase to the reseller.
This warranty is provided in addition to any rights you may be entitled to under
the Competitions & Consumer Act 2010.
Table des matières
Manuels destructeur de papier populaires d'autres marques
Swingline
Swingline STACK-AND-SHRED200X&200XL 60X Mode d’emploi
GBC
GBC ShredMaster CC055 Manuel utilisateur
UNITED OFFICE
UNITED OFFICE UAV 190 A1 Manuel utilisateur
UNITED OFFICE
UNITED OFFICE UAV 190 A1 Manuel utilisateur
Rexel
Rexel Optimum AutoFeed+ 45X Manuel utilisateur
Martin Yale
Martin Yale 227284S1 Manuel utilisateur
