4
GENERAL NOTES
This Instruction Manual is an integral part of the device and as such must always be kept with the device, also when the
heater is sold to another user. The Manual must therefore be conserved carefully and consulted attentively before any
action. In the case of damage or loss, you can at any time ask the local After Sales Service for a copy of the Manual.
After removing the packing, first make sure that the contents are complete and undamaged.
If the heater does not correspond in any way, contact the Agency that sold the heater.
Installation of destratifyers must be carried out by qualified companies. On completion of the job, they provide the owner
with a declaration of conformity of the installation correctly carried out that is according to the requisites of current
applicable Norms and according to the indications provided by the Manufacturer in this Instruction Manual.
The appliances have been manufactured for room heating and they must be used for this purpose, compatibly with their
performance characteristics.
The Manufacturer takes no contractual or extra-contractual responsibility for damage caused to persons, animals or
property, due to errors in installation, adjustment and maintenance or due to improper use.
Excess temperature is damaging to health and represents a waste of energy.
Avoid leaving rooms closed for long periods of time. Open the windows periodically to ensure adequate air change.
On leaving the heater unused for a long period, you should carry out at least the following operations:
Turn off the main heater switch and the main plant switch;
If the destratifyer is not used for a long period of time, we suggest you contact the After Sales Service or other
professionally qualified personnel for restarting.
All appliances must be fitted exclusively with original accessories. The Manufacturer is not responsible for any damage
caused by improper use of the appliance and by the use of accessories that are not original.
All references to Law, standards, directives and technical rules in this manual are to be considered as informative only
and valid at the date of printing of the Manual. The enforcing of new dispositions or the alteration of current ones do not
create any Manufacturer obligations towards third parties.
Repairs and maintenance must be carried out by the After Sales Service or by qualified personnel as specified in this
Manual. Do not alter or tamper with the appliance: this can create dangerous situations and the Manufacturer will not be
responsible for any damage.
The systems that must be installed (gas or oil pipes, electrical supplies etc) must be suitably fastened and must not
create obstacles that could cause tripping.
The Manufacturer is responsible for conformity of his product to laws, directives and construction standards current at
the date of sale. Knowledge and observation of legislative instruments and of standards for the design of systems, and
for installation, operation and maintenance are the exclusive responsibility of respectively the designer, the installation
personnel and the user.
The Manufacturer is not responsible for failure to observe the instructions in this Manual, for the consequences of any
operation carried out that is not specifically foreseen, or for any translations causing erroneous interpretations.
