
○,4、if register successfully,it will show “register successful”,and the system will
distribute one ID to you automatically at the same time.please remember this
ID,it can be used as the user name ,click “confirm”,input the password you set
just now again,then you can log in normally.
3
33
3、
、、
、Mobile phone network co
Mobile phone network coMobile phone network co
Mobile phone network connection
nnectionnnection
nnection
There are two ways for connecting device to network:
1) Wired connection
Wired connectionWired connection
Wired connection:
::
:after the camera power on,connect one end of the cable
after the camera power on,connect one end of the cable after the camera power on,connect one end of the cable
after the camera power on,connect one end of the cable
to the camera ,the other end to the router LAN port(please be sure the
to the camera ,the other end to the router LAN port(please be sure the to the camera ,the other end to the router LAN port(please be sure the
to the camera ,the other end to the router LAN port(please be sure the
router open the DHCP function) ,the network light w
router open the DHCP function) ,the network light wrouter open the DHCP function) ,the network light w
router open the DHCP function) ,the network light will be normally on
ill be normally on ill be normally on
ill be normally on
after connection successfully.
after connection successfully.after connection successfully.
after connection successfully.
2) WIFI connection
WIFI connectionWIFI connection
WIFI connection:
::
:the users can follow the below ways if they wants to
the users can follow the below ways if they wants to the users can follow the below ways if they wants to
the users can follow the below ways if they wants to
start using WIFI to get connection with the camera when the camera is
start using WIFI to get connection with the camera when the camera is start using WIFI to get connection with the camera when the camera is
start using WIFI to get connection with the camera when the camera is
wired connection
wired connectionwired connection
wired connection:
A、please add the devise to the Yoosee device list:“Add device”,please view the fifth
part for the detail steps.
B、open Yoosee software,1、choose“device”,click device name,choose “settings”;
2、choose “network settings”3、(
((
(please don’t choose “WIFI” directly at the
moment )
))
)the following will search all of the WIFI signal near it
automatically,choose your WIFI ID 4、input WIFI password,open wifi
successfully.