Important information - User
&
Installer
Look after your appliance
o
Always place your foodstuffs in cooking
receptacles. Never place them directly on top of the
hob.
o
Never pour cold water directly onto the kitchen hob
when hot.
o
Carefully follow the instructions for maintenance
and cleaning as described in this booklet.
o
If any cracks, fissures or other breaks appear on
the hob, it must be rendered inoperable .
immediately. The hob should be switched off either
via the hob isolating switch/fuse or circuit breaker in
the main fuse box - call after sales service
o
Switch off the hotplate if the relevant indicator light
for that hotplate does not operate when it is heating
- call after sales service.
o
Observe the residual heat indicators. This provides
an indication of which cooking zone is still hot.
o
Irregularities on the surface are a natural
characteristic of qlass-ceramic products. The hob's
mirror finish can mean that even the smallest
bubble, less than 1 mm in diameter, is more or less
visible. They neither impair the performance nor the
durability of the glass-ceramic hob.
o
Depending on the worktop surface, a small uneven
gap may form between the worktop and hob. This
is why the hob is provided with an all-round flexible
seal.
o
The temperature of the hotplate is controlled via the
switching on and off of the heater; This means that
the hotplate does not always glow red. If you select
a lower heat setting, the heater will switch off more
often than with a higher heat setting. The heater
still switches on and off even on the highest setting.
Important! The fact that the cooking plates work
intermittently does not mean that they are faulty.
The cooking plates always turn themselves on
and off for differing lengths of time. according to
the position selected on the control knob. (The
higher the number selected, the longer the
"on"
time and the higher the temperature).
6
