1
1
2
2
3
3
4
4
A A
B B
STANDARD TOLERANCES: (UNLESS OTHERWISE NOTED)
ANGULAR: ±1°.XX:±.01
FRACTIONAL:±1/32 .XXX:±.005
INCHES METRIC
ALL INFORMATION CONTAINED IN THIS DOCUMENT ARE PROPRIETARY AND CONFIDENTIAL.
COPYRIGHT, ALL RIGHTS RESERVED.
ANGULAR X.:±0.5
X°:±1°.X:±0.3
X.X°:±0.5°.XX:±0.1
A
DRAWING SIZE:
B
REV :
sensor with gun and
spray
1 OF 2
TITLE:
ITEM:
1321 Hocquart
St-Bruno, Qc, J3V 6B5
Tel: 450-461-1221
Fax: 450-461-0808
www.tecnar.com
SHEET:
1 / 2
SCALE:
NOTES:
1. UNLESS OTHERWISE NOTED, ALL
DIMENSIONS ARE IN MILLIMETERS.
2. REMOVE ALL SHARP EDGES AND
BURRS.
Quick setup guide
Installing the sensor head
Where to install
Install the sensor head in the spray booth at a location easily reachable by
the robot (spray gun). Also ensure that the sensor head does not interfere
with normal spraying operations.
Install the sensor head on a sturdy
mounting plate that does not
vibrate or move during spraying.
Refer to the schematic at the
end of this document for detailed
mechanical drawings of the
Accuraspray.
4.0
-3-
