TECHWOOD TFV-189 Manuel utilisateur
STEAM IRON
INSTRUCTION MANUAL
1
IMPORTANT SAFEGUARDS
❑Please read these instructions carefully before use.
❑Keep present instructions for future references.
❑Check that your mains voltage corresponds to that stated on
the appliance.
❑Only use the appliance for domestic purposes and household
or similar applications such as:
-staff kitchen areas, in shops, offices and other working
environments;
-by clients in hotels, motels and other residential type
environments;
- Environment type like :
• Farm Houses • Bed and Breakfast.
❑Only use the appliance in the way indicated in these
instructions.
❑Never use this unit near bathtub, shower, wash-hand basins or
other containers with water.
❑Never use this apparatus near water projections.
❑Never use this apparatus with the wet hands.
❑If, unfortunately the apparatus is wet, immediately withdraw the
cord of the socket-outlet.
❑Inform potential users of these instructions.
❑Never leave the appliance unsupervised when in use.
❑The appliance must be used only for its intended purpose. No
responsibility can be taken for any possible damage caused by
incorrect use or improper handling.
❑Children and persons with disabilities are not always aware of
the danger posed by the use of appliances.
❑This device can be used by children aged 8 years and older
and adults, with reduced physical, sensory or mental
2
capabilities or lack of experience and knowledge, if they have
been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
❑Cleaning and maintenance must not be made by children
without supervision.
❑Keep the iron and its cord out of reach of children less than 8
years of age when it is energized or cooling down.
❑This device is not a toy, do not leave children or people with
disabilities to play with.
❑In order to ensure your children‘s safety, please keep all
packaging (plastic bags, boxes, polystyrene etc.) out of their
reach.
❑Caution ! Do not allow small children to play with the foil :
THERE IS A DANGER OF SUFFOCATION !
❑From time to time check the cord for damages. Never use the
appliance if cord or appliance shows any signs of damage.
❑Never immerse the appliance in water or any other liquid for
any reason whatsoever.
❑Never place it into the dishwasher.
❑Never use the appliance near hot surfaces.
❑If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly Competent qualified
person(*) in order to avoid a hazard.
❑Disconnect the power source cable before any operation of
cleaning of maintenance and accessories assembly.
❑The iron must not be left unattended while it is connected to the
supply mains.
❑The plug must be removed from the socket-outlet before the
water reservoir is filled with water.
❑The iron is not to be used if it has been dropped, if there are
visible signs of damage or if it is leaking.
3
❑The filling aperture must not be opened during use.
❑When placing the iron on its stand, ensure that the surface on
which the stand is placed is stable.
❑The iron must be used and rested on a flat and stable surface.
❑When the iron is put back on its stand, make sure that the
surface that supports the iron-rest is stable.
❑Never use the appliance outside and always place it in a dry
environment.
❑Never use accessories, which are not recommended by the
producer. They could constitute a danger to the user and risk
to damage the appliance.
❑Never use any other connector than the one provided.
❑Never move the appliance by pulling the cord. Make sure the
cord cannot get caught in any way.
❑Never wind the cord around the appliance and do not bend it
❑Ensure that the power cord does not come into contact with hot
parts of this unit.
❑Make sure the appliance has cooled down before cleaning and
storing it.
❑The temperature of accessible surfaces may be very high when
the appliance is operating. Never touch these parts, of
apparatus, to avoid burning itself.
❑Make sure the appliance never comes into contact with
flammable materials, such as curtains, cloth, etc...& the power
cord and plug do not come in contact with water.
❑Before cleaning, always unplug the appliance from the power
supply and let it cool down.
❑This appliance is not intended to be operated by means of an
external timer or separate remote-control system.
❑Always place the unit on a flat surface. Ensure, also, not to
cover the device and not to put anything on it.
4
❑Always remove the plug from the wall socket when the
appliance is not in use.
❑When using an extension lead always make sure that the entire
cable is unwound from the reel. Use solely CE approved
extension leads. Input power must be at least 16A, 250V,
3000W.
❑Incorrect operation and improper use can damage the appliance
and cause injury to the user.
❑This device, designed for home use, complies with standards
relating to this type of product.
(*) Competent qualified person: after sales department of the
producer or importer or any person who is qualified, approved
and competent to perform this kind of repairs
SPECIFIC WARNING FOR IRONS
• Before placing the iron on its stand, always place the iron stand
on a flat, stable surface.
• Always unplug the iron before filling
• After use, unplug the iron and place it on its stand on a flat
surface.
• The iron must not be left unattended when it is connected to the
main power.
WARNING: BURN HAZARD.
• During operation, the temperature of the
appliance surface may be hot.
• The heating parts remain hot, long time after
stopping the machine.
5
• The symbol "Hot Surface" warns the user that
the apparatus walls may become hot, and to
take precautions.
GENERAL INFORMATION
The symbol "OPEN BOOK" means a recommendation
to read important things contained in the record.
The symbol "BIN" crossed out, abbreviation WEEE
(Waste of Electrical and Electronic Equipment) means
that at the end of life, it should not be discarded with
household waste, but filed to the sorting of the locality.
Waste recovery can help preserve our environment.
The symbol "STEAM" warns the user that steam can
escape from the unit and to take all necessary
precautions. (Risk of burns)
The symbol "CE" is the guarantee of compliance with
harmonized European standards, voluntary, reflecting
the essential requirements into technical
specifications. These standards are not mandatory but
are guarantees of compliance with essential
requirements.
The symbol ROHS (Restriction of use of some Hazardous
Substances) on the Environmental Protection, certifies
that for each of the five hazardous substances • Lead
• Mercury • (hexavalent) chromium • products for
protection against flames PBB and PBDE, the peak
6
concentration is equal to or less than 0.1% of the weight
of homogeneous material, and 0.01% for the 6th •
cadmium.
The symbol "TRIMAN" indicates that the consumer is
invited to dispose the product as part of a separate
collection (eg recycling bin, waste, voluntary intake
point).
For more information : http://www.quefairedemesdechets.fr
DESCRIPTION
1. Spray nozzle
2. Water filling door
3. Steam power adjustment
4. Steam express knob
5. Spray button
6. Thermostat selector
7. Comfort handle
8. Swivelling cord protector
9. Pilot light
10. Stainless steel sole plate
General description
1.Textile which has been applied (gloss, crinkle, relief etc.) is best ironed at lower
temperature.
2. Sort the laundry according to ironing temperature: put wool with wool, cotton with
cotton, etc. The iron heats up more quickly than it cools down. Therefore, start
ironing articles that need to be ironed at lowest temperature, such as those made of
synthetic fibre.
3. Temperature guide
Follow the ironing instructions on the garment label. If these is no instructions but
you do know the kind of fabric, please consult the table.
7
Warning: If the fabric consists of various kinds of fabrics, always select the
temperature required by the most delicate fibre.
Fabric
Temperature
control
Ironing methods
Synthetic fibres
nylon
·
Iron the reverse side. Do not use the
spray function, as spraying could cause
stains.
Silk
wool
··
Iron the reverse side to prevent shiny
spots.
Cotton
linen
···
You’d better set the iron to a steam
position.
8
FILLING THE WATER TANK
1. Set the steam control to the closed position.
2. Hold the iron by the handle and tilt it 10º to fill it. Run the water through the filling
inlet.
3.Clean the outside of the tank if water has leaked out of the tank.
4.After ironing, always empty the water tank.
5.The tap water is usable. However, if the water in your area is very hard, it is
advisable to use distilled water.
BEFORE FIRST USE
Fill the tank with water (without exceeding the maximum level) before connecting it.
Plug the iron into an outlet in good condition.
Selecting the temperature • • The indicator light comes on, indicating that the iron is
starting to heat up.
When the desired temperature is reached, the indicator goes off and the iron is ready
for use.
For this first use, test clean cloth or used cloth.
First, let the steam come out for at least 1 minute and press the express steam
button and the spray button several times, to clean the tank of any manufacturing
impurities.
Notes: During this operation a slight smoke may be released from the hearth or
iron for a few moments; This is normal.
During ironing, it is normal for the indicator light (ie the thermostat) to turn
on and off automatically to maintain a constant temperature.
It is always easier to iron fabrics or slightly damp clothes.
9
USE
● Unroll the power cord completely.
● Check that the tension in force in the country where you are, corresponds to
that indicated on the apparatus.
● Connect the apparatus in a correct socket-outlet, (and connected to the ground
if the unit is Class I), to avoid any danger.
● Disconnect the power source cable before any operation of cleaning of
maintenance and accessories assembly.
● Stand the appliance on a table or flat & stable surface.
● The item must not be left unattended when it is connected to main supply.
● The item is not to be used, if it has been dropped or if there are visible signs of
damage or if it is leaking.
● Never modify the appliance in anyway.
● To avoid a circuit overload, do not operate another high wattage appliance on
the same circuit.
● When the iron is returned to its iron rest, make sure that the surface that
supports the iron rest is stable.
● The iron must be used and rested on a stable surface.
TEMPERATURE ADJUSTMENT
• Low temperature for fabrics - Acrylic- Nylon - Polyester - Rayon - Synthetic
• • Average Temperature for Wool - Silk
• • • High temperature for Cotton - Linen
Spraying
Regardless of the temperature used, by pressing the spray button several times, the
laundry can be softened and wet for easy ironing. Always make sure there is enough
water in the tank.
Shot of steam
By press powerful steam button, an intense shot of steam is emitted from the
soleplate. This can be very useful e.g. when removing stubborn creases.
Notes : The shot of steam facility can be used only while ironing with middle or
high ironing temperature.
By pressing the shot of steam, Powerful steam can also be applied when
holding the iron in a vertical position. This is useful for removing creases
10
Ce manuel convient aux modèles suivants
3
Table des matières
Autres manuels TECHWOOD Fer
TECHWOOD
TECHWOOD TFV-188 Manuel utilisateur
TECHWOOD
TECHWOOD TFV-2004 Manuel utilisateur
TECHWOOD
TECHWOOD TC-2400 Manuel utilisateur
TECHWOOD
TECHWOOD TFV-109 Manuel utilisateur
TECHWOOD
TECHWOOD TFV-2405C Manuel utilisateur
TECHWOOD
TECHWOOD TC-2461 Manuel utilisateur
TECHWOOD
TECHWOOD TFS-246 Manuel utilisateur
