Technology Solutions 1153 Manuel utilisateur
USER GUIDE:
1153 WEARABLE
BLUETOOTH
®UHF
RFID READER
www.tsl.uk.com
Design • Development • Manufacture
1153 UHF Reader User Guide V1.24
© Technology Solutions (UK) Ltd 2014 2
TERMS & CONDITIONS
© 2014 TSL. All rights reserved.
No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means,
without permission in writing from Technology Solutions (UK) Ltd. This includes electronic or mechanical means,
such as photocopying, recording, or information storage and retrieval systems. The material in this manual is
subject to change without notice.
Technology Solutions (UK) Ltd (TSL) reserves the right to make changes to any product to improve reliability,
function, or design. TSL does not assume any product liability arising out of, or in connection with, the application
or use of any product, circuit, or application described herein. No license is granted, either expressly or by
implication, estoppel, or otherwise under any patent right or patent, covering or relating to any combination,
system, apparatus, machine, material, method, or process in which TSL products might be used. An implied
license exists only for equipment, circuits, and subsystems contained in TSL products. TSL and the TSL logo are
registered trademarks of TSL. Other product names mentioned in this manual may be trademarks or registered
trademarks of their respective companies and are hereby acknowledged.
All software is provided strictly on an “as is” basis. All software, including firmware, furnished to the user is on
a licensed basis. TSL grants to the user a non-transferable and non-exclusive license to use each software or
firmware program delivered hereunder (licensed program). Except as noted below, such license may not be
assigned, sublicensed, or otherwise transferred by the user without prior written consent of TSL. No right to
copy a licensed program in whole or in part is granted, except as permitted under copyright law. The user shall
not modify, merge, or incorporate any form or portion of a licensed program with other program material, create
a derivative work from a licensed program, or use a licensed program in a network without written permission
from TSL. The user agrees to maintain TSL’s copyright notice on the licensed programs delivered hereunder, and
to include the same on any authorized copies it makes, in whole or in part. The user agrees not to decompile,
disassemble, decode, or reverse engineer any licensed program delivered to the user or any portion thereof.
TSL reserves the right to make changes to any software or product to improve reliability, function, or design.
TSL does not assume any product liability arising out of, or in connection with, the application or use of any
product, circuit, or application described herein.
iPad, iPhone, iPod, iPod classic, iPod nano, iPod shuffle, and iPod touch are trademarks of Apple Inc., registered
in the U.S. and other countries. iOS is a registered trademark of Apple Inc.
“Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an electronic accessory has been designed
to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet
Apple performance standards. Apple is not responsible for the operation of this device or its compliance with
safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect
wireless performance.
The
Bluetooth
®word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of
such marks by Technology Solutions (UK) Ltd is under license. Other trademarks and trade names are those of
their respective owners.
www.tsl.uk.com
1153 UHF Reader User Guide V1.24
© Technology Solutions (UK) Ltd 2014 3
History
Version Date Modifications
1.0 05/08/2014 Document creation
1.1 28/08/2014 iOS 5/6 sections removed and replaced with iOS7
1.2 30/09/2014 iOS compatibility list updated
1.22 17/10/2014 Regulatory information updated
1.23 27/10/2014 Regulatory information updated
1.24 20/11/2014 Screenshot outlines added
CONTENT
Introduction 4
Parts of the 1153 UHF Reader 4
Using the 1153 UHF Reader 5
Battery Installation or Removal 5
Locking the Battery Cover (Optional) 9
Charging and Micro USB Connection 10
Connecting the Micro USB cable 10
Button Operation 11
Primary button action 11
Secondary Button action 11
Reading Transponders 12
Status LED 13
Connections 14
Bluetooth
®wireless technology connection 14
Compatible Apple product models 14
Other compatible products 14
Setting up a
Bluetooth
®connection with an Apple product 14
View list of
Bluetooth
®Devices (iOS 7) 15
Pair with TSL
Bluetooth
®device 16
Micro SD Card 20
Location and Installation 20
Auto Run File (AUTO.TXT) 21
Log File (LOG.TXT) 21
Software Development 22
Troubleshooting and Maintenance 23
Maintenance 23
Troubleshooting 23
Regulatory information 24
Information to the user – FCC 24
RF Exposure Guidelines 24
Laser Warning 24
Health and Safety Recommendations 25
Waste Electrical and Electronic Equipment (wEEE) 26
Warranty 26
About TSL 28
About 28
Contact 28
www.tsl.uk.com
1153 UHF Reader User Guide V1.24
© Technology Solutions (UK) Ltd 2014 4
Technology Solutions’ 1153 UHF Reader provides Ultra High Frequency (UHF) Radio Frequency Identification
(RFID), with optional barcode scanning functionality. The unit can be used stand alone or paired with a
Bluetooth
®
wireless technology enabled host device. It can be used with UHF transponders including the EPC Global Class 1
Generation 2 transponders.
INTRODUCTION
PARTS OF THE 1153 UHF READER
Micro USB connector
Status LEDs Trigger Button
UHF Antenna
FIGURE 1: Parts of the 1153 UHF Reader
WARNING
LASER LIGHT.
DO NOT STARE INTO BEAM.
CLASS 2 LASER
PRODUCT.
LASERSTRAHLUNG
NICHT IN DEN STRAHL BLICKEN.
LASER KLASSE 2.
LUMIÈRE
LASER NE PAS REGARDER
DANS LE FAISCEAU. APPAREIL
À LASER DE CLASSE 2.
630-670nm 1mW
www.tsl.uk.com
1153 UHF Reader User Guide V1.24
© Technology Solutions (UK) Ltd 2014 5
USING THE 1153 UHF READER
BATTERY INSTALLATION OR REMOVAL
The battery is charged using the supplied micro USB lead and therefore is unlikely to need to be changed once
installed. To access the battery compartment a slider switch must be moved. The battery compartment cover has
a release latch. To access the battery compartment, move the battery cover release slider to the position shown in
the diagram below.
FIGURE 3: Battery cover release slider in unlocked position
FIGURE 2: Battery cover release slider in locked position
‘Unlocked’ warning label
Battery cover
release slider
www.tsl.uk.com
1153 UHF Reader User Guide V1.24
© Technology Solutions (UK) Ltd 2014 6
USING THE 1153 UHF READER
FIGURE 5: Remove battery cover in this direction
FIGURE 4: Removeable battery cover
Once the battery cover release slider has been moved to the unlocked position, the battery cover can be removed
by simply pulling away from the 1153 body:
www.tsl.uk.com
1153 UHF Reader User Guide V1.24
© Technology Solutions (UK) Ltd 2014 7
USING THE 1153 UHF READER
The battery contacts need to be face down at the top of the battery to meet the contacts shown in the image below.
Battery contacts
FIGURE 6: Battery placement
FIGURE 7: Battery in position
www.tsl.uk.com
1153 UHF Reader User Guide V1.24
© Technology Solutions (UK) Ltd 2014 8
FIGURE 8: Replace battery cover
USING THE 1153 UHF READER
Once the battery is installed the actions to replace the cover are:
●Align the top edge of battery cover with the 1153 body
●Push the battery cover down into position
●Slide the locking switch into position
FIGURE 9: Move battery cover release slider to locked position
www.tsl.uk.com
1153 UHF Reader User Guide V1.24
© Technology Solutions (UK) Ltd 2014 9
USING THE 1153 UHF READER
LOCKING THE BATTERY COVER (OPTIONAL)
The battery cover can be locked into position using two M1.6x6mm Torx pan head screws.
M1.6x6mm Torx pan head screw.
FIGURE 10: Battery cover locking screw location
FIGURE 11: Battery cover fully locked
www.tsl.uk.com
1153 UHF Reader User Guide V1.24
© Technology Solutions (UK) Ltd 2014 10
USING THE 1153 UHF READER
CHARGING AND MICRO USB CONNECTION
CONNECTING THE MICRO USB CABLE
The 1153 UHF Reader kit is supplied with a micro USB lead for charging and synchronisation. A USB PSU is also
supplied for independent charging of the 1153 UHF Reader. The Micro USB connector is inserted into the 1153
UHF Reader as shown below.
FIGURE 13: Attaching the Micro USB cable
FIGURE 12: Location of Micro USB socket
www.tsl.uk.com
Table des matières
Autres manuels Technology Solutions Lecteur de cartes
