Technisonic Industries Limited TDAP-611 Manuel utilisateur
TDAP-611
AUDIO PANEL
Installation Instructions
TiL Document No. 15RE552
Rev. N C
Issue 2
MAY 2016
Technisonic Industries Limited
240 Traders Boulevard, Mississauga, Ontario L4Z 1W7
Tel: (905) 890-2113 Fax: (905) 890-5338
www.til.ca
Copyright by Technisonic Industries Limited. All rights reserved.
TECHNISONIC INDUSTRIES LIMITED
TDAP-611 Installation Instructions TiL 1 RE 2 Rev. N/C Issue 2
ii
This page is intentionally left blank.
TECHNISONIC INDUSTRIES LIMITED
TDAP-611 Installation Instructions TiL 1 RE 2 Rev. N/C Issue 2
iii
REVISION HISTORY
[ 1 RE 2 ]
For the most current revision of this document, please check the Technisonic website: www.til.ca
REV SECTION
- PAGE - DESCRIPTION DATE EDITED BY
N/C Original document release. May 04, 2016 A.L.
Issue 1 Added installation information to Section 2.3. Jul. 14, 2017 A.L.
8-1 Renumbered Sections 2.6-2.14.
Issue 2 1 Sections 1.1 & 1.2 are clarified. Apr. 16, 2018 A.L.
1 Added a new Section 1.3: Model Variation &
renumbered accordingly.
TECHNISONIC INDUSTRIES LIMITED
TDAP-611 Installation Instructions TiL 1 RE 2 Rev. N/C Issue 2
iv
This page is intentionally left blank.
TECHNISONIC INDUSTRIES LIMITED
TDAP-611 Installation Instructions TiL 1 RE 2 Rev. N/C Issue 2
v
ESD CAUTION
This unit contains static sensitive devices. Wear a grounded wrist strap and/or conductive gloves
when handling printed circuit boards.
WARNING AND DISCLAIMER
Changes or modifications not expressly approved by Technisonic Industries could void the user’s
authority to operate the equipment.
This manual is designed to provide information about the TDAP-611. Every effort has been made to make
this manual as complete and accurate as possible.
WARRANTY INFORMATION
The Model TDAP-611 Audio Panel is under warranty for one year from date of purchase. Failed units
caused by defective parts or workmanship should be returned to:
Technisonic Industries Limited
240 Traders Boulevard
Mississauga, Ontario L4Z 1W7
Tel: (90 ) 890-2113
Fax: (90 ) 890- 338
NOTES
TECHNISONIC INDUSTRIES LIMITED
TDAP-611 Installation Instructions TiL 1 RE 2 Rev. N/C Issue 2
vi
SUMMARY OF DO-160G ENVIRONMENTAL TESTING
Summary of DO-160G Environmental Testing for the Technisonic Model TDAP-611 Audio Panel:
Conditions Paragraph Category
Temperature and Altitude 4.0 A2, B2, D1
Temperature Variation .0 B
Humidity 6.0 A
Operational Shocks and Crash Safety 7.0 B
Vibration: Sinusoidal Profile M
Random Profile B
Sine-on-random Profile G
8.0 S, U
Magnetic Effect 1 .0 Z
Power Input 16.0 B
Voltage Spike 17.0 B
Audio Frequency Susceptibility 18.0 B
Induced Signal Susceptibility 19.0 ACE
Radio Frequency Susceptibility 20.0 T
Emission of Radio Frequency Energy 21.0 M
Lightning Induced Transient Susceptibility 22.0 A3E3XX
Electrostatic Discharge 2 .0 A
Fire, Flammability 26.0 C
TECHNISONIC INDUSTRIES LIMITED
TDAP-611 Installation Instructions TiL 1 RE 2 Rev. N/C Issue 2
vii
SECTION
TITLE
PAGE
1 GENERAL DESCRIPTION B
1.1 INTRODUCTION ............................................................................................................ 1
1.2 DESCRIPTION ............................................................................................................... 1
1.3 MODEL VARIATION ...................................................................................................... 1
1.4 TECHNICAL CHARACTERISTICS ................................................................................ 2
1. SYSTEM LIMITATIONS ................................................................................................. 3
1. .1 POWER LIMITATIONS ................................................................................................. 3
1. .2 FREQUENCY RESPONSE LIMITATIONS .................................................................. 3
1. .3 CROSSTALK LIMITATIONS ........................................................................................ 3
1. .4 TRANSMISSION PRIORITY ........................................................................................ 3
1. . INDUCED SIGNAL SUSCEPTIBILITY, RF SUSCEPTIBILITY, AND RF EMISSION ...... 3
2 INSTALLATION INSTRUCTIONS B
2.1 GENERAL ......................................................................................................................
2.2 EQUIPMENT PACKING LOG ........................................................................................
2.3 INSTALLATION ..............................................................................................................
2.4 INSTALLATION KIT – CONTENTS ...............................................................................
2. WIRING REQUIREMENTS ............................................................................................ 6
2.6 TDAP-611 AUDIO PANEL INSTALLATION ................................................................... 6
2.6.1 CABLE CLEARANCE ................................................................................................... 6
2.6.2 SHIELD GROUNDS ..................................................................................................... 6
2.7 INSTALLATION – PIN LOCATIONS AND CONNECTIONS ......................................... 8
2.8 HEADPHONE INSTALLATION ...................................................................................... 11
2.9 MICROPHONE INSTALLATION .................................................................................... 11
2.10 PTT CONNECTIONS ..................................................................................................... 11
2.11 MAIN POWER +28 V
DC
.................................................................................................. 11
2.12 BACKLIGHTING POWER +28 V
DC
OR + V
DC
.............................................................. 11
2.13 STORAGE ...................................................................................................................... 11
2.14 POST-INSTALLATION ADJUSTMENTS ....................................................................... 1
APPENDIX A Support Notes .......................................................................................... 17
WARRANTY ................................................................................................................... 18
TABLE OF CONTENTS
TECHNISONIC INDUSTRIES LIMITED
TDAP-611 Installation Instructions TiL 1 RE 2 Rev. N/C Issue 2
viii
FIGURE
TITLE
PAGE
1 Outline Drawing .............................................................................................................. 7
2 TDAP-611 Rear Connectors .......................................................................................... 8
3 Wiring Connections for Communication Transceivers ................................................... 12
4 Wiring Connections for Navigation Receivers, Power, and Configurations .................... 13
Wiring Connections for User Interfaces ......................................................................... 14
6 Top Cover Post-Installation Adjustment Locations ......................................................... 1
7 Bottom Cover Post-Installation Adjustment Locations ................................................... 16
TABLE
TITLE
PAGE
1 TDAP-611 General Specifications ................................................................................. 2
2 Bottom Connector - J101 ( 0 Pin D Connections) - Use FEMALE Connector .............. 8
3 Bottom Connector – J202 (1 Pin D Connections) - Use MALE Connector .................. 9
4 Top Connector – J201 (37 Pin D Connections) - Use FEMALE Connector .................. 9
Top Connector – J102 (1 Pin D Connections) - Use FEMALE Connector .................. 10
LIST OF FIGURES
LIST OF TABLES
TECHNISONIC INDUSTRIES LIMITED
TDAP-611 Installation Instructions TiL 1 RE 2 Rev. N/C Issue 2
1
1.1 INTRODUCTION
This publication provides operating information for the TDAP-611 Audio Panel. The TDAP-611 is
only available with Night Vision Goggle (NVG) optimized panel lighting.
1.2 DESCRIPTION
The Technisonic Digital Audio Panel (TDAP) Audio Management System TDAP-611 is a panel
mounted Digital Audio System that provides centralized control and management for all audio
signals within the airframe for up to 7 distinct Users (Pilot, Co-pilot, and five passengers) with
varying degrees of connectivity depending on their station.
The TDAP-611 connects to all aircraft Transceivers (up to a maximum of 8 distinct Transceiver
Inputs), Navigational Receivers (up to a maximum of 8 distinct Receiver Inputs), Externally
Alerting Sirens, and User Headsets. The unit includes functionality allowing expansion to an
external PA or Paging system; it also supports full Simulcast transmitting as well as Monitor Only
functionality amongst all connected Transceivers.
To reduce pilot workload and avoid operational problems, ACCESS/D™ systems have auto-RX
switching when a transmitter is selected. The TDAP-611 has front panel selectable and
adjustable VOX, LIVE, or KEYED intercom (ICS) functions.
An EMERGENCY mode locking toggle provides "straight through" or “fail-passive” transmit and
receive audio for the pilot or other user on a pre-set radio.
In the NORMAL position (front panel LED is green), the pilot's audio is provided as selected by all
of the panel controls and is part of the ICS system. Separate RX and ICS volume controls are
provided on the panel along with an ICS VOX threshold control.
1.3 MODEL VARIATION
There is no model variation. The TDAP-611 is only available with Night Vision Goggle (NVG)
optimized panel lighting.
SECTION 1: GENERAL DESCRIPTION
TECHNISONIC INDUSTRIES LIMITED
TDAP-611 Installation Instructions TiL 1 RE 2 Rev. N/C Issue 2
2
1.4 TECHNICAL CHARACTERISTICS
TDAP-611 GENERAL SPECIFICATIONS
MODEL TDAP-611 - ACCESS A Audio Controller:
PHYSICAL CHARACTERISTICS:
Width (max.) ........................................................................................................................ .73 inches
Height (max.) ...................................................................................................................... 2.24 inches
Depth (behind panel) .......................................................................................................... 4. 9 inches
Weight ...................................................................................................................... 2.23 lbs. (1.01 Kg)
Mounting .................................................................................................... Standard Dzus, 4 fasteners
POWER SOURCE REQUIREMENTS:
DC Voltage (MIN, TYPICAL, MAX) ........................................................................ 1 .0 V, 28 V, 32.2 V
(System performance will be degraded at upper and lower limits)
DC Current ................................................................................................................................... < 1 A
Backlighting Input:
High Level Backlighting Voltage ................................................................. 0-28 V
DC
@ 20 mA Max.
Low Level Backlighting Voltage ..................................................................... 0- V
DC
@ 20 mA Max.
TECHNICAL CHARACTERISTICS:
Input Impedance (Normal Mode, any RX input) ......................................................... k1 Ω (approx.)
Headset Channel Output Impedance .......................................................................................... 30 Ω
H/S Audio Power Output ........................................................................... At least 2 0 mW into 1 0 Ω
Speaker Power Output ..................................................................................... At least 2. W into 8 Ω
Audio Distortion (Speaker or H/S) ......................... Less than 2% THD @ 1 kHz at total rated output
Audio Frequency Response (ICS) ............................................. Within 3 dB from 300 Hz to 6000 Hz
Audio Frequency Response (RX & NAV) .................................. Within 3 dB from 300 Hz to 3000 Hz
Hum and Noise Level ..................................................................... Better than -60 dB below 00 mW
Input to Input Isolation .................................................................... Better than -70 dB between inputs
Deselected Input Isolation ....................................................................................... better than -6 dB
ENVIRONMENTAL:
Temperature (Operating) .................................................................................. -4 °C to +70° Celsius
Temperature (Survival Non-Operating) ............................................................ - °C to +8 ° Celsius
Humidity ............................................................................................................. 9 % Non-condensing
Shock ............................................................................................................................. 12 g (any axis)
Altitude ................................................................................................................................. 1 ,000 feet
TABLE 1: TDAP-611 General Specifications
Table des matières
