TechniSat TechniVision 22 HD Manuel d'instructions
Quick start manual
and warranty documentation
TechniVision 22/26/32 HD
1 Illustrations
Rear of TV
TechniVision 22 HD
(connections, attachment, cover)
2
Rear of TV
TechniVision 22 HD
1 Antenna input
(DVB-C, DVB-T, analogue)
2 LNB Input (DVB-S)
3 Common Interface
4 USB port
5 DC socket
6 S-Video input
7 Audio input (R, L)
(S-Video, Video and
component input)
8 Video input
9 Component input
10 Cable guide
11 Stand attachment cover
12 HDMI input 2
13 HDMI input 1
14 Audio output digital (S/P
DIF electrical)
15 Headphone output
(3.5mm jack plug)
16 Audio input (VGA/DVI)
(3.5mm jack plug)
17 VGA connection
18 Scart socket (EuroAV)
1110
141312 1516 17 18
1
2
3
4
5
6
9
8
7
Rear of TV
TechniVision 26/32 HD
(connections, cover)
Rear of TV
TechniVision 26/32 HD
1 USB port
2 Common Interface
3 LNB Input (DVB-S)
4 Antenna input
(DVB-C, DVB-T, analogue)
5 S-Video input
6 Audio input (R, L)
(S-Video, Video and
component input)
7 Video input
8 Component input
9 Mains power switch
10 Mains power connection
11 Stand attachment cover
12 HDMI input 2
13 HDMI input 1
14 Audio output digital
(S/P DIF electrical)
15 Headphone output
(3.5mm jack plug)
16 Audio input (VGA/DVI)
(3.5mm jack plug)
17 VGA connection
18 Scart socket (EuroAV)
119 10
141312 1516 17 18
4
3
2
5
1
8
7
6
3
EN
Remote control
4
Remote control
Remote control code
On/Standby
Sound on/off
Numeric keys
Recording
SFI
Page up
Back
TV/Radio mode
Rewind
Info
Fast forward
Programme +/- Volume +/-
Menu Zoom/Format
Function keys
Stop
Arrow keys Pause / playback
Function selection
Option selection
Page down
DVR mode
OK
Sleep timer
Language selection
PaT
Genre
Teletext
Freeze frame / Jogshuttle
Timer
5
Front of TV
Display
Front of TV
(Display)
Display
IR receiver
LED
EN
6
Important instructions
2 Please read this first
Dear customer,
This quick start manual simply describes the most important connection options and the
basic operating steps required for you to quickly get started operating the TechniVision 22,
TechniVision 26 or TechniVision 32.
Please also definitely comply with the notes on safety provided under Point 2 of the
instruction manual, appropriate use, operation, power consumption in standby mode and
during operation as well as transport of and cleaning the television. You will also find
information provided in this section about disposal of the packaging and the television. The
manufacturer’s declaration is also provided in this section.
2.1 Intended use
> Connection to mains power 230V/50Hz (TechniVision 26 / 32 HD and TechniVision 22
HD via mains power unit supplied) or to 12 V DC power (TechniVision 22 HD)
> The TV set is intended only for the reception and playback of picture and sound signals.
> The TV is only suitable for connection to audio and video devices, antenna units and
computers that meet DIN standards and have a CE mark.
Use is permitted in private and commercial situations in dry rooms and under supervision.
> Any other use is expressly forbidden.
2.2 Manufacturer’s declaration
The TV meets the following requirements:
> the EU directive 2006/95/EC (low voltage directive)
- EN 60065
> the EU directive 2004/108/EU (EMC directive)
- EN 55013, EN 55020, EN 61000-3-2
and bears the CE mark.
2.3 Important instructions
Please observe the following instructions in order to avoid any safety risks, prevent damage
to the TV, and help contribute to environmental protection.
2.3.1 Safety
For your own protection you should read the safety notes carefully before using your new
TV. The manufacturer accepts no liability for damage caused by inappropriate handling, or
by non-compliance with the safety precautions.
Do not open the receiver housing under any circumstances!
Touching parts that conduct high voltages can be fatal!
Any necessary repairs to the receiver should only be carried out by qualified personnel.
Only operate the receiver in a temperate climate.
Do not switch on the TV immediately after delivery or transportation in cold weather;
wait until it reaches room temperature.
Do not expose the set to dripping or sprayed water. If water gets into the unit,
immediately remove the mains plug and advise the service department.
Do not place the TV on a narrow shelf or in small cabinets; ensure a minimum
ventilation gap of 10cm around the unit.
The set has ventilation slits to allow heat to escape from the inside of the set. Do not
cover the ventilation slits with objects such as newspapers, tablecloths etc.
Do not operate sources of heat near the TV that can additionally heat it up.
Do not place objects over the ventilation slits.
In thundery weather and when the set is not to be used for an extended period or
during absence you should remove the mains and antenna plugs from the set.
Overvoltage can damage the TV.
In the event of a noticeable defect on the set, if a smell is produced or if smoke comes
out, if there are severe malfunctions, if there is damage to the power cable or to the
casing and if liquids penetrate the set, pull the mains plug out immediately and contact
the service department.
In the event of a power failure the TV should be isolated from the mains power by
pulling out the plug or by switching the set off.
During long absences the TV should be switched off. This extends the lifetime of the
screen and saves energy.
2.3.2 Disposal
The packaging material used for your TV consists entirely of recyclable materials. Please
sort the components appropriately and dispose of them in line with your local waste disposal
regulations .
At the end of its useful life span, this receiver may not be disposed of with your regular
household waste. It must be taken to a recycling collection point for electrical and electronic
equipment.
This is indicated by the symbol on the product, the operating manual or the packaging.
Important instructions
7
EN
The materials can be re-cycling in accordance with their labelling.
By ensuring that valuable raw materials are re-used you can make a valuable contribution
towards protecting our environment.
Please contact your local authority for the location of the nearest recycling point.
Please ensure that flat batteries removed from the remote control and electronic waste are
not sent to your regular household refuse site, but are correctly disposed of either in special
bins for problem waste, or at collection points in the retail trade.
2.3.3 Power consumption in Standby and during operation
The TV’s power consumption in standby and during operation depends on the settings you
select, the functions you use and the devices inserted/attached such as CI modules or USB
storage media.
Thus you can reduce power consumption during operation by e.g. only inserting/attaching CI
modules and USB storage media if they are actually going to be used. Power consumption
during operation is also influenced by the selected picture mode and backlighting setting
(Main menu > Settings > Picture Settings). The higher the backlighting is set, the
higher the power consumption too.
As the TV is not fully in standby mode during the automatic software download (Main
menu > Settings > Service Settings > Software Update) for the relevant period,
power consumption can be reduced by disabling this function. Power consumption is also
influenced by the standby clock and fast start functions.
8
Important instructions
9
3 Remote control
3.1 Changing the battery
> Open the cover on the battery compartment at the rear of the remote control by
pushing it in the direction of the arrow and then lifting it off.
> Insert the supplied batteries, ensuring that the poles are the right way around
(indicator visible in battery compartment).
> Close the battery compartment again.
3.2 Remote control code
By switching over the remote control option it is possible to use this remote control to
operate a TechniSat television and two TechniSat receivers using the same coding.
> Hold down the remote control code button to switch over the remote control option
and press the OK button as often as necessary until the LED for the desired remote
control option (TV, SAT1 or SAT2) flashes briefly.
The currently set remote control code will be displayed, as the appropriate LED
flashes, while pressing a button.
Remote control
EN
10
Connecting
4 Connecting
a Connecting the satellite antenna using the LNB input.
b Connecting the cable connection (digital and/or analogue) or the DVB-T antenna to the
antenna input on the television.
c Connecting the television to a BluRay/DVD player using an HDMI cable or a cinch
components cable with the cable adapter.
d
Connecting the digital audio output to Hi-Fi stereo equipment or surround sound equipment.
d
TV/Radio
b
a
BluRay / DVD
c
Autres manuels pour TechniVision 22 HD
1
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels TechniSat TV
TechniSat
TechniSat Tareo 26 Manuel utilisateur
TechniSat
TechniSat MultyVision ISIO 32 Manuel d'instructions
TechniSat
TechniSat 100Hz Television sets Colani-TV Classic Line Manuel utilisateur
TechniSat
TechniSat Tareo 32 Manuel utilisateur
TechniSat
TechniSat TECHNIVISION HD24B Manuel utilisateur
TechniSat
TechniSat TECHNIVISION HD24A Manuel utilisateur
TechniSat
TechniSat TECHNIVISION UHD43B Manuel utilisateur
TechniSat
TechniSat Tareo 40 Manuel utilisateur
TechniSat
TechniSat HD-VISION 32 PVR Manuel utilisateur
TechniSat
TechniSat TECHNIVISION UHD43A Manuel utilisateur
Manuels TV populaires d'autres marques
Philips
Philips Colour Television Manuel utilisateur
Toshiba
Toshiba 27A10 Manuel utilisateur
Philips
Philips 42PF9630A/37 Manuel utilisateur
Hitachi
Hitachi 32FX48B Manuel utilisateur
DAEWOO ELECTRONICS
DAEWOO ELECTRONICS DTQ-14V1FC Manuel utilisateur
Changhong Electric
Changhong Electric uhd55b6000is Manuel utilisateur
