TechniSat TechniMedia UHD Manuel d'instructions

Quick start manual

TechniMedia UHD

* Scart-Adapter included.

15 16 17 18 19 20 21

TV connections / Local control

1 Illustrations

Connections

1Common Interface

2Card reader

3Audio output analogue

(3,5 mm jack plug)

4Headphone output

(3.5 mm jack plug)

5Audio output - digital

(S/P DIF optical)

6USB-port

7 HDMI interface 1

8HDMI interface 2

15 USB-port

16 HDMI interface 3 (ARC)

17 LAN network port

18 Scart connection (AV)*

19 LNB Input 2 (DVB-S)

20 LNB Input 1 (DVB-S)

21 Antenna input (DVB-C,

DVB-T, analogue)

Display / Operation

9On/Standby

10 TV/AV

11 Programme +

12 Programme -

13 Volume +

14 Volume -

22 LED / IR receiver

23 Mains power switch

1 Illustrations

Sleep Timer

Sound on/off

Numeric keypad keys

Recording

SFI

Page up

Back

Options selection

Timer Audio channel

Teletext PiP / PaP / PaT

Freeze frame / Jogshuttle Genre

Channel +/-

Stop / DVR

Rewind

Arrow keys

Function keys/off

Menu Zoom/Format

Function selection

Volume +/-

Info

Page down

WWW

0/AV (source selection)

TV/Radio mode

Remote control code

On/Standby

Pause / playback

Fast forward

2 Please read this first

Dear customer,

This quick start guide only describes the most important connection options and the basic

operating steps to enable you to start operating the TechniMedia UHD quickly, and does

not replace the operating manual. Many additional functions are described in the operating

manual that are not mentioned in this quick start guide. Furthermore, the operating manual

provides a great deal of additional information regarding the individual device functions and

settings, to further explain the options and the meaning of the settings and functions.

Please also note the information regarding safety, proper use, operation, power

consumption, the transport and cleaning of the device provided under point 3 of the operating

manual. This point also includes information regarding disposal of the packaging and the

device itself. Furthermore, this point also includes the manufacturer‘s declaration.

2.1 Inserting/replacing the batteries in the remote control

> Open the cover on the battery compartment at the rear of the remote control by pushing

it in the direction of the arrow and then lifting it off.

> Insert the supplied batteries, ensuring that the poles are the right way around (indicator

visible in battery compartment), then close the battery compartment again.

2.2 Legal Notices

The devices within the TechniMedia UHD series comply with the basic requirements

and the other relevant provisions of the 1999/5/EC, 2006/95/EC and 2004/108/EC

directives and bear the CE mark.

This device can be operated in Germany, Austria, Switzerland, Belgium, the

Netherlands, Luxembourg and Italy.

DE AT CH BE

NL LU IT

Subject to modifications and typographical errors. Version 07/15. You can find the

current version of the manual in the Download area of the TechniSat homepage.

Copying and duplication only with the consent of the publisher.

TechniMedia UHD 43, TechniMedia UHD 49, TechniMedia UHD 55 and TechniSat are

registered trademarks of TechniSat Digital GmbH, Postfach 560, 54541 Daun, www.

technisat.de.

Manufactured under licence from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

2.3 Servicing notes

Warning: if you encounter a problem with this equipment, first please call our Technical

Hotline. This is available Mon - Fri 8am to 8pm on +49 3925 9220 1800.

Should you be required to return the device, please send it to TechniSat Teledigital

GmbH, Service-Center, Nordstr. 4a, 39418 Staßfurt.

BluRay

TV Radio

3 Connecting

a Connection/s connecting the satellite antenna to LNB-Input 1/LNB-Input 2

When operating with an antenna signal, the LNB must be connected to LNB Input 1.

b Connecting the cable connector (digital and/or analogue) and/or the DVB-T antenna to

the antenna input on the TV.

c Connecting the television to a BluRay/DVD player using an HDMI cable.

d Connecting the digital audio output to a surround sound system.

The following references (a b c) refer to the connection example on page 5.

3.1 Satellite antenna

aConnect the LNB inputs 1 / 2 using two separate antenna feed cables that are set

up identically to be able to use the full range of functions.

If there is only one antenna signal available, connect this to LNB input 1 on the

television.

Also note points 7.16, 8.1 and 10.6 of the operating manual.

3.2 Antenna/cable connection (analogue and digital)

b Connect the antenna input for the LCD TV to either a terrestrial antenna or to the

connection socket for the cable or antenna connection.

To receive DVB-T signals and DVB-C and analogue cable channels simultaneously,

use the TechniSat DVB C/T switch (part no. 0000/3263).

3.3 BluRay/DVD player

c Use an HDMI connection cable to connect your BluRay/DVD player, for example, to an

HDMI connection.

3.4 Surround sound/Hi-Fi amplifier

You can connect the LCD TV to a surround sound or Hi-Fi amplifier to obtain the best

possible sound quality.

3.4.1 Digital

dIf your amplifier has an electrical or optical input (S/P-DIF) or an HDMI input, connect the

Audio output digital optical or HDMI 3 (ARC) socket to the corresponding input

on your amplifier.

Depending on the broadcaster concerned, the stereo signal (PCM) and, where

broadcast, Dolby Digital signal (AC3) are available.

3.4.2 Analogue

dTo do so, connect the 3.5 mm jack socket on the analogue audio output on the TV

to the cinch socket on one of your amplifier’s inputs (e.g. TV or AUX;

Note! The Phono input is not suitable!).

3.5 Mains power connection

The television should only be connected to the mains power network (230V / 50Hz)

once it has been fully connected by cable to the associated components. This will

prevent damage to the TV or other components.

4 Basic operation

Dear Customer,

The following section starts by covering basic operation as well as recurrent operating steps

for the TV. This should make it easier to read the instruction manual, since it avoids repeated

description of identical steps at each individual stage.

If it is necessary for a function or setting for the TV to be different from the basic operation,

the difference in operation is described in detail in the relevant section in the instruction

manual.

The so-called "On Screen Display" is used on your TV. This simplifies operation of the

television since the buttons on the remote control can take on different functions. This makes

it possible to reduce the number of buttons.

In this On Screen Display (OSD for short) the selected functions or settings are highlighted.

Furthermore, you will find a line along the lower edge of the screen where the various buttons

on the remote control are shown with their current functions.

In this instruction manual the terms shown in the OSD as well as the buttons to be

pressed are distinguished from the rest of the text by the print format used.

Warning - indicates an important note which you must always observe in order to avoid

problems with the television, loss of data or unwanted operation.

Tip - indicates a note about the function described as well as other functions associated

with it and any others to be observed with reference to the respective item in the

instruction manual.

4.1 Switching the television on/off

> When the receiver is on standby, you can switch it on by pressing the

On/Standby button on the remote control/TV.

> When operating normally you can switch the device to standby mode by pressing the

On/Standby button on the remote control/TV.

When switching the television on and off, note section 7.1 of the instruction manual as

well, plus the references given in this section.

4.2 Calling up the main menu and navigating through the menus / functions

The following example will illustrate how you reach the main menu and call up a submenu.

The objective of the example is to call up the Picture settings menu.

> Press the Menu button. The main menu appears on the screen.

> Select the Settings menu item by using the arrow keys to move the highlight to this

item.

> Press the OK button to open the Settings menu.

> Use the up/down arrow keys to highlight the Picture settings item.

> The Picture settings menu is opened by then pressing the OK button.

You can also highlight the individual menu items in the same way as you highlight an

item on a submenu to open it and alter the respective settings.

The menu items in some menus have to be highlighted by moving sideways. This is

done by pressing the right/left arrow keys.

By pressing the up/down arrow keys it is possible to move the highlight from line to

line, and to move upwards and downwards page by page using the page up/down

buttons.

You will see the so-called menu path in the uppermost line of the menu. This shows

you the menu you are currently in and the path you took to reach this menu. In the

example shown this is Main menu > Settings > Picture settings. The menu

path is also shown throughout the instruction manual and shows you how you can

reach the respective menu with the settings described.

If the blue function key with Help is displayed in the bottom line on the screen, a

Help page can be displayed by pressing this button, and hidden by pressing it again.

4.3 Accepting settings / Exiting menus and functions

In some menus and functions the changes made must be accepted manually in order to save

them permanently. If this does not happen, the function or the values that existed before the

change was made will be reset automatically on exiting the menu.

If an Accept field or the green function key with Accept is displayed in the bottom

line of the screen, you can see that the changes made must be saved manually to be

accepted.

> By highlighting Accept using the right/left arrow keys and confirming with the

OK button, or by pressing on the green function key (Accept), the changes are

saved and you return to the next menu level up.

Alternatively

> Press the Back button.

A request appears asking whether the changes you made should be applied.

> Use the right/left arrow keys to highlight Yes or No and confirm your selection by

pressing the OK button.

The changes will now be saved or discarded according to your selection and you move

back to the next menu level up.

Alternatively

> Press the Menu button to exit the menu directly.

Settings that need to be saved manually will be reset in this case.

If the green function key with Accept is not displayed on the bottom line of the

screen, the changes are saved automatically on exiting the menu.

4.4 Changing a setting

You can carry out settings using the arrow selection method, the selection list,by

entering numbers and by using the virtual keyboard. The television specifies the

method that can be used to change a highlighted setting. You can see this from the following

displayed symbols:

- Arrow selection method (section 4.4.1)

Arrows are shown at the left and right edge of the highlight.

- Selection list (section 4.4.2)

The symbol is shown at the right edge of the highlight.

- Entering numbers (section 4.4.3)

- Virtual keyboard (section 4.4.4)

The symbol is shown at the right edge of the highlight.

Table des matières

Autres manuels TechniSat Téléviseur LED

TechniSat

TechniSat TechniVision 22 HD Manuel d'instructions

Manuels Téléviseur LED populaires d'autres marques

LG 43UF680T-TA Manuel utilisateur

Samsung

Samsung QE43LS03A Manuel utilisateur

Philips

Philips 55PUS6272/12 Manuel utilisateur

TCL

TCL L40E3020F Manuel utilisateur

Seiki

Seiki SC-55AU300 Manuel utilisateur

Sharp

Sharp AQUOS LC-60LE650U Manuel utilisateur

Durabase

Durabase L24H472S4VD Manuel utilisateur

LG 32LH51 series Manuel utilisateur

Tesla

Tesla 43K625BUS Manuel utilisateur

Changhong Electric

Changhong Electric UD55GHE6000Ai Manuel utilisateur

LG LN41 Series Manuel utilisateur

Sharp

Sharp LC-32LE511E Manuel utilisateur

Samsung

Samsung The Terrace LST7T Series Manuel utilisateur

Saba

Saba SB40FDS195 Manuel utilisateur

LG TL43 Series Manuel utilisateur

LG 22LN413Y-TD Manuel utilisateur

Philips

Philips 43PFT5102 Manuel utilisateur

SWEDX

SWEDX SS-42K15 Manuel utilisateur