Technare DPA 28X Manuel utilisateur

TECNARE DPA 28X OWNER’S MANUAL

Tecnare Sound Systems – www.tecnare.com – [email protected] 2

1. Important safety instructions

Some terminals carry electrical current of sufficient magnitude to constitute a risk of

electric shock. Use only high-quality commercially-available speaker cables with ¼” TS

plugs pre-installed. All other installation or modification should be performed only by

qualified personnel.

This symbol, wherever it appears, alerts you to the presence of ininsulated

dangerous voltage inside the enclosure – voltage that may be sufficient to

constitute a risk of shock.

This symbol, wherever it appears, alerts you to important operating and

maintenance instructions in the accompanying literature. Please read the manual

To reduce the risk of electric shock, do not remove the top cover (or the rear section). No

user serviceable parts inside. Refer servicing to qualified personnel.

These service instructions are for use by qualified service personnel only. To

reduce the risk of electric shock do not perform any servicing other than that

contained in the operation instructions. Repairs have to be performed by qualified

service personnel.

1. READ THESE INSTRUCTIONS

All the safety and operating instructions should be read before the product is operated.

2. KEEP THESE INSTRUCTIONS

The safety and operating instructions should be retained for future reference.

3. HEED ALL WARNINGS

All warnings on the product and in the operating instructions should be adhered to.

4. FOLLOW ALL INSTRUCTIONS

TECNARE DPA 28X OWNER’S MANUAL

Tecnare Sound Systems – www.tecnare.com – [email protected] 3

All operating and use of instructions should be followed.

5. DO NOT USE THIS APPARATUS NEAR WATER

Do not use the product near water. For example, near a bathtub, washbowl, kitchen sink,

or laundry tub, in a wet basement, or near a swimming pool.

6. CLEAN ONLY WITH DRY CLOTH

Unplug the unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol

cleaners. Use a damp cloth for cleaning.

7. DO NOT BLOCK ANY VENTILATION OPENINGS

Slots and openings in the cabinet back or bottom are provided for ventilation, to ensure reliable

operation of the limit and to protect it from overheating. These openings must not be blocked or

covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or

similar surface. This product should never be placed near or over a radiator or heat source. This

product should not be placed in a built-in installation such as a bookcase or rack unless proper

ventilation is provided or the manufacture's instructions have been adhered to.

8. DO NOT INSTALL NEAR ANY HEAT SOURCES

This Product should be situated away from heat sources such as radiators, stoves, or other

products (including amplifiers) that produces heat.

9. DO NOT DEFEAT THE SAFETY PURPOSE OF THE POLARIZED OR GROUNDING-

TYPE PLUG

A Polarized plug has two blades with one wider than the other. A grounding-type plug has two

blades and a third grounding prong. The wide blade or the third prongs are provided for your

safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of

the obsolete outlet.

10. PROTECT THE POWER CORD FROM BEING WALKED ON OR PINCHED

PARTICULARLY AT PLUGS, CONVENIENCE RECEPTACLES, AND THE POINT

WHERE THEY EXIT FROM THE APPARATUS.

TECNARE DPA 28X OWNER’S MANUAL

Tecnare Sound Systems – www.tecnare.com – [email protected] 4

11. ONLY USE ATTACHMENTS/ACCESSORIES SPECIFIED BY THE

MANUFACTURER.

12. USE ONLY WITH CART, STAND, TRIPOD, BRACKET, OR TABLE SPECIFIED BY

THE MANUFACTURER, OR SOLD WITH THE APPARATUS. WHEN A CART IS USED,

USE CAUTION WHEN MOVING THE CART/APPARATUS TO AVOID INJURY FROM

TIP-OVER.

Do not place this unit on an unstable cart, stand, tripod, bracket, or table. The unit may fall,

causing serious injury to someone, and serious damage to the appliance. A unit and cart

combination should be moved with care. Quick stops, excessive force, and uneven surfaces may

cause the product and cart combination to overturn.

13. UNPLUG THIS APPARATUS DURING LIGHTNING STORMS OR WHEN UNUSED

FOR LONG PERIODS OF TIME.

For added protection for this unit during a lightning storm, or when it is left unattended and unused

for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system.

This will prevent damage to the unit due to lightning and power line surges.

14. REFER ALL SERVICING TO QUALIFIED SERVICE PERSONNEL. SERVICING IS

REQUIRED WHEN THE APPARATUS HAS BEEN DAMAGED IN ANYWAY, SUCH AS

WHEN THE POWER SUPPLY CORD OR PLUG IS DAMAGED, LIQUID HAS BEEN

SPILLED OR OBJECTS HAVE FALLEN INTO THE APPARATUS, THE APPARATUS

HAS BEEN EXPOSED TO RAIN OR MOISTURE, DOES NOT OPERATE NORMALLY,

OR HAS BEEN DROPPED.

15. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT

EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

16. APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO

OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE

APPARATUS.

TECNARE DPA 28X OWNER’S MANUAL

Tecnare Sound Systems – www.tecnare.com – [email protected] 5

TABLE OF CONTENTS:

TABLE OF CONTENTS:.................................................................................................5

1 INTRODUCTION..........................................................................................................6

2 SHIPPED CONTENT...................................................................................................6

- DPA - 28X unit.......................................................................................................6

- User Manual...........................................................................................................6

3 FEATURES..................................................................................................................6

4 FRONT PANEL FUNCTIONS......................................................................................7

5 REAR PANEL FUNCTIONS.........................................................................................8

TECNARE PCC CONTROLLER ADVANCED SERIES USER MANUAL .......................9

1.- INSTALLATION..........................................................................................................9

1.1.- SOFTWARE INSTALLATION..............................................................................9

1.2.- SETUP THE PC COMMUNICATION ..................................................................9

2.- USING THE PCC CONTROLLER ADVANCED SERIES...........................................9

2.1 Overview................................................................................................................9

2.2 MENU BAR..........................................................................................................10

2.3 NETWORK WINDOW..........................................................................................11

2.4 INPUT SECTION.................................................................................................12

UNIT ID AND GROUPING.....................................................................................12

SIGNAL GENERATOR..........................................................................................13

INPUT LEVEL........................................................................................................13

INPUT COMPRESSOR .........................................................................................14

GENERAL SETUP.................................................................................................15

GRAPHIC EQUALIZER .........................................................................................20

2.5 OUTPUT SECTION.............................................................................................20

CROSSOVER........................................................................................................22

PARAMETRIC EQ .................................................................................................23

LIMITER.................................................................................................................24

LEVEL/DELAY.......................................................................................................24

TECNARE DPA 28X OWNER’S MANUAL

Tecnare Sound Systems – www.tecnare.com – [email protected] 6

1 INTRODUCTION

The DPA 28X is a complete 2 input - 8 output digital loudspeaker management system

designed for the touring or fixed sound installation markets. The absolute latest in

available technology is utilized with 64-bit floating point processors and high performance

24-bit Analogue Converters. The high-bit DSP prevents noise and distortion induced by

truncation errors of the commonly used 24-bit fixed-point devices. A complete set of

parameters include I/O levels, delay, polarity, 8 bands of parametric EQ per channel,

multiple crossover selections, compressor, Limiter, USB and Ethernet port connection.

Precise frequency control is achieved with its 1 Hz resolution.

The DPA - 28X can be controlled or configured in real time on the front panel using the

previously stored presets or with the intuitive PC software via the USB or Ethernet

interface. The Ethernet port allows controlling the device from a long distance using just

an Internet connection.

2 SHIPPED CONTENT

- DPA - 28X unit

- User Manual

- Software CD: Tecnare PCC controller Advanced Series.

3 FEATURES

•2 Input and 8 Outputs.

•64 Bits floating point DSP

•High performance 24-bit A/D Converters

•1 Hz Frequency Resolution

•Storage of up to 10 program setups

•Unlimited number of presets via software

•Uploading of 10 collection presets in one step via software

•USB port connection.

•Ethernet port connection

TECNARE DPA 28X OWNER’S MANUAL

Tecnare Sound Systems – www.tecnare.com – [email protected] 7

•30 bands Input graphic equalizer.

•8 bands Output Parametric equalizer per output channel

•4 ways configurable Crossover

•Main Delay

•Input and output Compressor and Limiter

•Configurable Clock

•Noise Generator

•Sound Analyzer

•Phase inverter per band

•Mute

•Via adjustable delay

4 FRONT PANEL FUNCTIONS

1.- LCD Screen CH-A: Show all the necessary information to control de unit

1.- Unit name

2.- Shows the preset number and identification.

3.- ID of the Unit.

I B Z A 6

I B Z A 6I B Z A 6

I B Z A 6

I D : 0 1

I D : 0 1I D : 0 1

I D : 0 1

P 0 1

P 0 1P 0 1

P 0 1

d e f a u l t

d e f a u l td e f a u l t

d e f a u l t

1 2

4 5

6 7 8

TECNARE DPA 28X OWNER’S MANUAL

Tecnare Sound Systems – www.tecnare.com – [email protected] 8

2.- Rotary thumb wheel CH-A: Controls the presets. To select the desire preset, press

the wheel.

3.- On / SIGNAL / CLIP led CH-A: When On indicate the unit is On, Signal at the input

and the input level is above the device´s maximum headroom respectively.

4.- LCD Screen CH-A: Show all the necessary information to control de unit

5.- Rotary thumb wheel CH-A: Allows you to switch between presets. To select the

desire preset, press the wheel.

6.- On / SIGNAL / CLIP led CH-A: When On indicates the unit is On, Signal at the input

and the input level is above the device´s maximum headroom respectively.

7, 8.- Ethernet connector: Standard RJ-45 female socket.

9.- Power switch: Controls power On/Off.

5 REAR PANEL FUNCTIONS

1.- Main Power: Connects via a standard IEC socket. A compatible power cord is

supplied with the unit. The voltage input is either 115VAC or 230VAC and is clearly

specified on the unit. Voltage requirement has to be stated upon ordering.

2, 3.- XLR input and outputs: Separate 3-pin XLR connectors are provided for each

audio input and output. The device's output stage employs the balanced impedance

topology. All I/O connectors have pin 1 as ground (shield), pin 2 as + and pin 3 as –

4.- USB connectos: USB connector per channel for PC connection.

1 2 3

TECNARE DPA 28X OWNER’S MANUAL

Tecnare Sound Systems – www.tecnare.com – [email protected] 9

TECNARE PCC CONTROLLER ADVANCED SERIES USER

MANUAL

1.- INSTALLATION

1.1.- SOFTWARE INSTALLATION.

1.- Click on Pcc12G_Setup.exe icon

2.- Follow the wizard instruction (for default installation you can press NEXT until the

end)

* The estimated time required for first installation is about 1 minute.

* If asked by the wizard, restart the computer

1.2.- SETUP THE PC COMMUNICATION

1.- Connect the unit to the PC using the provided USB cable.

2.- USING THE PCC CONTROLLER ADVANCED SERIES

2.1 Overview

The Tecnare PCC Controller advanced series software application provides real-time

control and configuration editing for the DPA-28X using a laptop or other PC-compatible

computer.

In addition, the application provides control over each individual input channel: Gain,

Graphic EQ, Compressor, main delay, and over each individual output channel:

Crossover, 8 bands parametric EQ, phase inverter, mute, and delay.

In addition, the application provides a powerful real time analyzer with pink noise

generator capability.

Changes made in the PC software are immediately executed in the DPA-28X.

To start the application click on the PCC Icon on your desktop

TECNARE DPA 28X OWNER’S MANUAL

Tecnare Sound Systems – www.tecnare.com – [email protected] 10

It will appear a screen as is in the following image:

Open the Connect dropdown list and select On Line, this will connect your unit to your

PC.

The user interface is divided into 4 sections:

- Menu Bar

- Network window

- Input section

- Output section

2.2 MENU BAR

The following menus are available in the Menu Bar at the top of the screen

FILE

- Load Preset: Click this option to Load an existing preset from your computer

- Save Preset: Save the current preset to a file

- Load Set: Click this option to Load a Set of 10 preset from your computer

- Save Set: Save the current set of 10 presets to a file.

- Exit: Exit the application

CONNECT

- On line: Connects the computer to the unit.

Table des matières

Manuels Équipement d'enregistrement populaires d'autres marques

KV2 Audio

KV2 Audio 500 Series Manuel utilisateur

Robotics Technologies

Robotics Technologies microBus-Cam II Manuel utilisateur

Seca

Seca 460 Manuel utilisateur

Cognex

Cognex MVS-8000 Series Manuel utilisateur

Mect

Mect MPNC006 Series Manuel utilisateur

Bad Caf

Bad Caf THE LEASH Manuel utilisateur

Strymon

Strymon NIGHTSKY Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Manuel utilisateur

Tews Technologies

Tews Technologies TPMC465 Manuel utilisateur

Honeywell

Honeywell Excel 50 Manuel utilisateur

SeaLevel

SeaLevel COMM+8.LPCI Manuel utilisateur

Arturia

Arturia AUDIOFUSE STUDIO Manuel utilisateur

Rukra

Rukra RK-1240 Manuel utilisateur

Samson

Samson SCOM Manuel utilisateur

Dynacord

Dynacord DPS260 Manuel utilisateur

Nice

Nice Core Manuel utilisateur

Pyle Pro

Pyle Pro PSS8 Manuel utilisateur

RF-System

RF-System TinyGate Manuel d'utilisation et d'entretien