1. Introduction
The TL-INCT-01 is a HDMI In-line Controller, with resolutions up to 4K@60Hz (chroma
sub-sampling 4:4:4 8-bit only) and HDCP 2.2.
Its digital or analog audio output allows audio to de-embed from HDMI input and send
to an audio distribution system, such as an AVR or Zone Amplifier. Its rotary EDID switch
has 15 EDID presets to help negotiate the HDMI handshake in certain situations, such as
an old HDMI display with bad DDC channel, or a DVI display with audio reinforcement.
By auto-detecting input signal status, it automatically triggers CEC commands to turn on
or off a TV with CEC support, pre-loaded RS232 commands to power on or standby
projector, and relay control to trigger up and down for a projection screen.
1.1 Features
l Supports video sources up to HDMI 2.0(4K@60Hz 4:4:4 8-bit) and HDCP 2.2
l HDMI audio de-embedded out with Digital Coaxial and Analog Stereo
l Rotary switch for EDID Management with 15 EDID presets
l Built in CEC controller from HDMI out
l Built in RS232 controller, to pre-load and store RS232 command of sink device
l Automatic CEC/RS232 command to Power ON/Standby display device, by detecting
input signal status
l Built in RELAY control to automatically turn Projector Screen ON/OFF, by detecting
l Automatic input cable equalization and signal regeneration compensation
ü 3 x Phoenix Male Connector (3.5 mm,
ü 1 x Power Adapter (DC 5V 1A)
&
Check whether all the items listed above are included in your package. If not,
