Compass bearing is a 360˚ direction indicator. The
compass is numbered clockwise with north as 0˚, east
90˚, south 180˚, and west 270˚. So a bearing of 42˚ would
be northeast and a bearing of 200˚ would be southwest.
Lap-By-Distance Creates a lap after the preset lap distance
has been reached.
Lap-To-Waypoint Creates a waypoint at the end of selected
path whenever a lap is marked.
Cold Start If GPS has been off for over 2 hours, the
satellite data is no longer valid. It takes about 30 seconds
to acquire sufcient new data and x your location.
Hot Start If GPS has been off for a short time and you
re-start; satellite data is still valid. It takes a few seconds to
x your location.
"GPSMaster" is application software written to work with
this watch. Workout log and paths can be downloaded /
uploaded via the USB cable. GPSMaster provides a much
better means for workout analysis, path creation and
manipulation.
%EMHR is the percentage of the Estimated Maximum Heart
Rate. EMHR is calculated as 220 minus your age.
Target HR Zone is the region in which you would like your
Heart Rate to be during exercise.
C. Definitions / Glossary
Waypoints are sets of coordinates that identify a point
in physical space. These coordinates usually include
longitude and latitude, and sometimes altitude.
Waypoint names are limited to 10 characters and are
named or renamed in GPSMaster.
Path is a collection of waypoints. It can be treated
independently as scattered waypoints; or linked in
order- either forward or backward. Linked waypoints
form a PATH. This watch supports 10 Paths. Each path
has 99 waypoints maximum. Paths can be created in the
Lap-To-Waypoint function. Or created by GE (Goggle
Earth) / GMaps (Google Maps); then imported through
GPSMaster. A path name can be 32 characters long.
Workout logs are records that contain: starting time /
date, workout summary, lap details, speed, distance, HR
and track data. The sampling interval is controlled by the
value established in TrackLog setting.
Pace is an estimated rate of travel. It is based on the
elapsed time needed per Km / Mile. The unit of PACE is
specified in Menu Settings VSystem VUnits VGeneral.
If the unit is Mile and PACE -reads 6 then you are
moving at 6 minutes per Mile.
