tecbot M1 Manuel utilisateur
User Manual
TECBOT M1
“The First Self Rinse, Roller Mop,
and Vacuum Robot.”
User Manual
“The First Self Rinse, Roller Mop,
and Vacuum Robot.”
TECBOT M1
1
Welcome
Thank you for purchasing our TECBOT M1, “The First Self Rinse, Roller Mop,
and Vacuum Robot.”
TECBOT M1 “Does It All” by bringing you multiple innovative advantages.
It can sweep, vacuum, mop, and self rinse automatically without returning to
the charging dock.
We are TECBOT, “Expert Manufacturers of Cleaning Robots.” We make cleaning
easier, less time cleaning more time living.
Package list 3
TECBOT M1 anatomy 4
Precaution 8
Installation 9
Wi-Fi Pairing 10
Charging 14
Cleaning path 15
Cleaning modes and surface settings 16
Regular maintenance 17
Restore factory settings 21
Troubleshooting and FAQs 22
Warnings and Restrictions 24
Specications 25
Hazardous materials 26
Auto
Sweep
Mop
Heavy
Mop
WoodOutdoor
32
Table of Content Package list
01 TECBOT M1
02 2 extra edge-cleaning brushes
03 Remote control
04 Charging dock
05 Power cord
06 Brush and hook knife cleaning tool
07 Cylindrical brush cleaning tool
08 ExtraHEPAlter
09 User Manual
10 Quick Start Guide
11 Warranty
01
03
02 04
05 08
111009
07
06
User Manual
TECBOT M1
“The First Self Rinse, Roller Mop,
and Vacuum Robot.”
Quick
Start Guide
TECBOT M1
“The First Self Rinse, Roller Mop,
and Vacuum Robot.”
YEARS
3
54
TECBOT M1 anatomy
01 Collision bumper
02 Emitter sensor
03 Receiver sensor
04 Wall sensor
05 Standby button
06 Wi-Fi indicator
07 Charging button
08 Laser navigation system
09 USB Type-C port
05
03
01 02 03
04
03
06 07 08
09
10 Contact point for charging dock
11 Clisensor
12 Driving wheel
13 V-shape brush main cover
14 V-shape brush
15 Edge-cleaning brush
16 Release clip for the
V-shape brush main cover
17 Wheel
18 ON/OFF switch
19 Release clip for the roller mop
20 Roller mop
11
13
15
16
11
17
11
17
18
15
16
14
12 1010
19 20
Auto
Sweep
Mop
Heavy
Mop
WoodOutdoor
76
Clean water tank
21 Finger-pulls
22 Inlet
23 Air vent
Dust box
24 Handle
25 Back cover
26 Filters
27 Release clip for back cover
Charging dock
28 Power indicator light
29 Signal emitter
30 Charging contact points
31 Power port (back side)
Wastewater tank
32 Drain
33 Release clip
34 Wastewater inlet
21
32
23
33
34
24
28
25
29
26
30 31
27
22
Clean water tank
Dust box
Wastewater tank
Charging dock
Standby
Charging
Return your TECBOT M1 to
the charging dock.
Start/Pause
Forward:
Press once to move forward.
TECBOT M1 will stop when
encountering an obstacle.
Backward:
Press and hold it to move
backwards until release.
Left and Right:
Press and hold to turn at release
TECBOT M1 will go forward.
Outdoor oor settings:
Sweeping and mopping settings
foroutdooroors.
Automatic mode:
Sweeping and mopping setting
for automatic mode.
Wood Floor settings:
Sweeping and mopping settings
forwoodoors.
Sweep mode:
press this button, the host will
start dry sweep function.
Mop mode:
press this button, the host will
start mopping.
Heavy Mop mode:
press this button, the host will
start the strong wet mopping
function.
Remote control
98
Before operating your TECBOT M1, please remove
any tripping hazard, litter, quickly falling objects and
valuables, and potentially dangerous items from the
oortoavoidpersonalorpropertydamages.
Please, prevent your TECBOT M1 from coming in close
contactwithopenamesorhigh-temperatureequipment
duringoperationtoextenditslifetimeandavoidres.
Precaution
Please, retrieve the clean water
and wastewater tanks when
turning over your TECBOT M1.
!NOTE:
The ON/OFF switch is at the bottom right side of your TECBOT M1. (“1” position for ON and “0” for OFF).
Your TECBOT M1 will self-check for about 10 seconds before turn ON.
Installation
01 After taking your TECBOT M1 out of the box, remove
the protective foam on both sides.
02 Check whether all components are in place:
wastewater tank, V-shape main brush, edge-cleaning
brushes, and dust box.
03 Placethechargingdockagainstawallonaleveloor,
and connect it to a power source. Make sure there are
more than 5.3 feet of free space in the front and 2
feet to the sides of the charging dock.
04 Place your TECBOT M1 at the charging dock.
05 Turn ON your TECBOT M1.
06 Removethecleanwatertankbyitsnger-pulls.Fill
it, close it and place it back into your TECBOT M1 and
close the top lid.
07 Your TECBOT M1 is ready for Wi-Fi pairing.
2 ft
5.3 ft
2 ft
ON/OFF switch
1110
Wi-Fi Pairing
Download Tecbot Home App
Download the Tecbot Home App from the App Store or
Google Play to enjoy all of your TECBOT M1 functions
from home or on the go.
Conrm
• Your Wi-Fi router supports 2.4 GHz frequency band.
• Your mobile device or tablet is connected to the Wi-Fi
network of 2.4 GHz frequency band.
• Your mobile device or tablet operating system is up to
date (iOS 8.0, Android 4.4, or newer versions.)
05 Tap "Switch Pairing Mode" to
choose pairing method:
AP mode
Your TECBOT M1 will create
its a temporary Wi-Fi hotspot
(SmartLife-XXXX) to pair with
your device.
EZ mode
TECBOT will use your home Wi-Fi
connection to pair with your device.
01 Register an account
02 Tap "add device"
03 Tap "M1"
04 Enter your Wi-Fi
password
or
01 02 03
05
04
1312
06 07 08
09 10 11
06 Restart your TECBOT M1 by switching it
OFF and ON. The switch is located at the
bottom of your TECBOT M1.
07 Press and hold the Standby button for
3 seconds until it beeps once to establish
the Wi-Fi connection.
08 ConrmtheWi-Fiindicatorlightisblinking
and after you hear the voice prompt
tap "NEXT."
09 Search and select "SmartLife-XXXX" in
your Wi-Fi network list and return to the
Tecbot Home App.
10 The TECBOT M1 Wi-Fi indicator light
willbeonandstopblinkingtoconrm
pairing.
11 Success! Your TECBOT M1 is ready to do
it all.
AP mode
06 07 08
09 10
06 Restart your TECBOT M1 by switching it
OFF and ON. The switch is located at the
bottom of your TECBOT M1.
07 Press and hold the Standby button for
5 seconds to open your TECBOT M1 Wi-Fi
connection. It will beep twice and you
hear the voice prompt.
08 ConrmtheWi-Fiindicatorlightisblinking
and tap “NEXT.”
09 Keep your device as close as possible
to your TECBOT M1, wait 2 minutes.
The TECBOT M1 Wi-Fi indicator light
willbeonandstopblinkingtoconrm
pairing.
10 Success! Your TECBOT M1 is ready to do
it all.
EZ mode
1514
Your TECBOT M1 will automatically return to the charging
dock when its battery is lower than 20%. You can also
directly press the charging button on your TECBOT M1,
remote or the Tecbot Home App to start the automatic
recharge function.
Your TECBOT M1 will not turn ON when its battery is low.
Please, manually place your TECBOT M1 on the charging
dock. The indicator light on the charging dock will blink to
indicate that charging has started. Your TECBOT M1 takes
about 6 hours to charge its battery fully.
During the charging process, the roller mop will lift auto-
maticallytopreventleakingontheoor.
Battery
Your TECBOT M1 uses a high-performance lithium-ion
rechargeable battery pack. To maintain the battery
performance, please charge your TECBOT M1 after
daily use.
Your TECBOT M1 will
automatically return to
the charging dock when its
battery is lower than 20%.
<20%
NOTE:
Turn OFF your TECBOT M1 if you do not intend to
use it in the following 24 hours.
Charging Cleaning path
When cleaning, your TECBOT M1 will start to move
straight forward. It will turn left for edge cleaning when
encountering a wall or a barrier. It will automatically plan
a zigzag path to clean the remaining space and avoid
obstacles in its way.
Autres manuels pour M1
2
Table des matières
Autres manuels tecbot Aspirateur
