Questions?
Scan Here
03
Solar lights work by using electricity generated by the solar panel to
charge internal batteries. These batteries are then used to power the
light . When switched on which is on the back of solar panel the lights
automatically illuminate at night by using a light sensor. The duration
of illumination will depend on the amount of sunlight and therefore
change received by the solar panel.
POSITION
Position the solar panel to receive
the maximum amount of sunlight.
Do not position under bright light as this
will prevent the light switching on at night .
FIRST USE
50% 8h
Whilst there may be some initial charge in the battery. We recommend fully
charging it before first use. Leave the switch in the "ON" position for 2 sunny days
to ensure the battery is fully charged. Once fully charged switch to "ON" and your
lights will come on automatically.
NOTE: The diagrams shown are for illustrative purposes only and are not to scale.
INSTRUCTIONS:
1. Turn solar unit on by pressing the power button located on the switch panel.
2. Place the product in direct sunlight.
3. For better performance, make sure solar panel have been fully charged in
direct sunlight for approximately 8-10 hours.
INSTRUCTION FOR SOLAR PANEL
