TD Electronics TDSESOTH05 Manuel utilisateur
- 1-
TD Single Ear Stereo Headset
Part #: TDSESOTH05
- 2-
1. Notice Before Using
Thank you for purchasing the TD Electronics
Bluetooth® Headset (TDSESOTH05). Please read this
User's Manual completely before you use the Headset.
The TDSESOTH05 has been developed using
Bluetooth® wireless technology and is capable of
connecting with Bluetooth® devices designed with
Audio Gateway. PDAs, Desktops and Notebook
computers can be connected and paired with the
Headset using a USB Bluetooth® Dongle or built-in
Bluetooth capability (if applicable). Before using the
Headset please verify your Bluetooth® device (Phone,
PDA) complies with Bluetooth® V1.1/V1.2/V2.0/V2.1
and supports the Bluetooth® Headset or Hands-free
profile.
-3-
2. Package Contents List
Please inspect this package and refer to the package
contents list below to verify all items were included in
this package:
A. TDSESOTH05
headset.....................................................1
B. AC Wall
Charger..............................................................1
C. DC Car
Charger................................................................1
D. USB Charging
Cable.........................................................1
E. User's
Manual..................................................................1
F. Extra Ear Pad and Mic
Cover............................................2
- 4-
3. TDSESOTH05 Bluetooth® Headset
Overview
- 5-
4. Battery information
- 6-
The device is equipped with an integrated
lithium-polymer battery. The battery cannot be replaced.
Do not attempt to remove the battery from the device
since it would damage the device. The full performance
of a new battery is not achieved until after two or three
complete charging-discharging cycles. The battery can
be charged and discharged several hundred times, but
it looses its capacity over time.
Disconnect the TDSESOTH05 from the power supply
as soon as the battery is fully charged, overcharging
would reduce the service life of the battery. A charged
battery will lose its capacity if it is not used on a regular
basis.
Important: Ensure that the battery is fully charged if you
do not use the device for a long period of time. To avoid
a complete discharge of the battery, the TDSESOTH05
should be charged at least every 3 months.
5. Charging the battery
- 7-
The TDSESOTH05 is operated with a rechargeable
battery. Charge the battery completely before its first
use. Read the section "Battery information" before
starting the charging process.
1) Connect the charger to the correct outlet.
2) When the charger is connected to the headset, the
red indicator light will turn on. Charging the battery
fully may take up to 2 hours.
3) When the battery is fully charged, the red indicator
light will turn blue. Disconnect the charger from the
headset and the outlet. The headset is ready to
use.
NOTE:
- For first time use, please charge the headset fully.
- The fully charged battery has power for up to 27 hours
of talk-time or up to 750 hours of standby time.
However, the talk and standby times may vary when
used with different mobile phones or other compatible
- 8-
Bluetooth® devices, usage settings, usage styles, and
environments. When the battery power is low, the
headset will remind you by a "Beep" tone every 20
seconds, and the red indicator light starts to flash.
- For using the TDSESOTH05 with iPhone or
Blackberry, an additional battery meter feature will be
activated and the remaining battery capacity will
display on your phone.
6. Pair to your Bluetooth® phone
- 9-
Before you use your headset the first time, you must
pair the unit with a Bluetooth® enabled mobile phone.
Pairing is a one-time process and required only for the
first connection with the cell phone The TDSESOTH05
can be paired with up to eight cell phones and be
connected simultaneously with two cell phones.
- Keep the TDSESOTH05 within range of a
Bluetooth®-ready cell phone; the distance should not
exceed a meter.
- The headset must be turned off.
- Hold the On/Off button for approx. 5 seconds until you
hear a short-low signal tone and the indicator light
intermittently flashes red and blue. The device is in
pairing mode. Pairing mode should engage
automatically upon the first time turning on the headset.
- Find the Bluetooth® setting of your cell phone and
start the search for Bluetooth® devices. (For further
details, please read the operating instructions of your
- 10 -
cell phone).
- From the list of devices found, select the
"TDSESOTH05".
- If required, enter the PIN code "0000" and confirm the
entry. If the pairing process was successful, you will
hear a signal tone and the indicator lights blue for 3
seconds. (Note: The PIN code is preprogrammed and
cannot be changed.)
- After pairing, the TDSESOTH05 automatically
connect with the cell phone. For some cell phones, you
have to manually confirm the connection. Once paired,
the headset will change to standby mode and the
indicator light will flash blue every 10 seconds.
Note: If pairing is not completed within 2 minutes, the
headset will turn off. If this happens, repeat the pairing
process.
Table des matières
