B10C/OT-565(A) Repair Document
ED 1.0 B10C Level 2 Repair Document
6/26
All right reserved. Passing on and copying of this document, use and communication are not permitted
without authorization
a) Check Traceability Information：
Screen display the traceability information. If they are all right, press Pass to continue.
b) LCD display test:
The patterns are displayed on the main screen from "COLOR" pattern, "BLACK" pattern,
"CHECKER" pattern, "GREY CHART" pattern, "WHITE" pattern, "MENU" pattern, "MacBeth"
pattern. If they are all right, press Pass to continue.
c) Sub-LCD display test:
Display “Hello my friend!” in the sub-LCD.
Display confirm information in main LCD.
If they are all right, press Pass to continue.
d) Main LCD backlight test:
The backlight will be auto on and off, if it works all right, press Pass to continue.
e) Keypad backlight test:
Keypad backlights begin flashing, if it works all right, press Pass to continue.
f) Keypad test:
The operator presses all keys. If all keys are pressed, go to next text item automatically. Timeout is
fixed to 40s.
g) Vibrator test:
Vibrator begins to work, if it works all right, press Pass to continue.
h) Camera Test:
Display the Camera Screen then go to result confirm screen. If it works all right, press Pass to
continue.
i) Camera Zoom Test:
Display Camera zoom screen first. If it works all right, press Pass to continue.
j) SIM card test:
Display “testing…” during the wait of the status.
Display “Insert SD card” if no SD card inserted
Timeout is fixed to 15s.
If pass, screen display “OK” for 1s and go to the next test item automatically.
k) USB charger test:
Display “testing…” during the wait of the status.
Display “Insert USB charger” if no USB charger inserted
Timeout is fixed to 15s.
If pass, screen display “OK” for 1s and go to the next test item automatically.
l) SD card test:
Display “testing…” during the wait of the status.
Display “Insert SD card” if no SD card inserted
Timeout is fixed to 15s.
If pass, screen display “OK” for 1s and go to the next test item automatically.
m) Bluetooth test:
Display “searching…” during the wait of the status.
Timeout is fixed to 20s.
If pass, screen display “OK”(include BT device info and address ) for 1s and go to the next test item
automatically.
n) Audio connector test:
Display “testing…” during the wait of the status.
Display “Insert audio connector”, if no audio connector inserted.
Timeout is fixed to 15s.
If pass, screen display “OK” for 1s and go to the next test item automatically.
o) Headset left test:
The operator does a small acoustic test, he speaks in the headset microphone and estimates the audio
quality when he ears the signal in headset left earphone. If it works all right, press Pass to continue.
p) Headset right test:
The operator does a small acoustic test, he speaks in the headset microphone and estimates the audio
quality when he ears the signal in headset right earphone. If it works all right, press Pass to continue.
q) Headset test:
The operator does a small acoustic test, he speaks in the headset microphone and estimates the audio
quality when he ears the signal in headset earphone. If it works all right, press Pass to continue.
r) FM play test:
