Tate SmartAire MZ Basic Guide de dépannage

User Installation Manual

r1.9-3/11/15 SmartAire®MZ

Jessup, MD 20794

Tel (410)799-4200 1 of 26

SmartAire®MZ

User Installation Guide

Please Read and Save

These Instructions

User Installation Manual

r1.9-3/11/15 SmartAire®MZ

Jessup, MD 20794

Tel (410)799-4200 2 of 26

CONTENTS

Introduction ............................................................................................................................................................................ 3

Safety .................................................................................................................................................................................. 3

Included Components ......................................................................................................................................................... 5

Additional Required Components....................................................................................................................................... 5

Required Tools .................................................................................................................................................................... 5

Additional Notes ................................................................................................................................................................. 5

Quick Installation –Aluminum DirectAire® ............................................................................................................................ 6

Quick Installation –Steel DirectAire® ..................................................................................................................................... 6

Initial Setup ............................................................................................................................................................................. 7

Step 1: Prepare the Job Site ................................................................................................................................................ 7

Step 2: Route the temperature Sensors ............................................................................................................................. 8

Step 3: Attach the Sensors to the Rack Face....................................................................................................................... 8

Step 4: Connect the Sensors to the Tree ............................................................................................................................ 9

Step 5: Connect the Tree to the SmartAire® MZ................................................................................................................. 9

Step 6: Turn the Battery On .............................................................................................................................................. 10

Step 7: Connect the Power to the SmartAire® MZ ........................................................................................................... 11

Step 8: Deploy the Air Blockers......................................................................................................................................... 12

Step 9: Assemble the SmartAire® with the DirectAire® Al................................................................................................ 13

Step 9B: Installation with DirectAire®............................................................................................................................... 14

Step 10: Place the Assembly into the Floor ...................................................................................................................... 15

Interface................................................................................................................................................................................ 16

Changing Modes................................................................................................................................................................ 16

Regional Unit Conversion.................................................................................................................................................. 17

Disabling Unoccupied zones ............................................................................................................................................. 17

Adjusting the setpoint....................................................................................................................................................... 17

TCP/IP Advanced Programming & monitoring ..................................................................................................................... 18

SNMP Monitoring and Control.............................................................................................................................................. 23

Wiring Diagram ..................................................................................................................................................................... 24

Factory Default Settings........................................................................................................................................................ 25

Troubleshooting & Alarms .................................................................................................................................................... 26

User Installation Manual

r1.9-3/11/15 SmartAire®MZ

Jessup, MD 20794

Tel (410)799-4200 3 of 26

INTRODUCTION

Thank you for choosing a Tate Airflow product. Tate Airflow products are engineered to maximize the

efficiency of your data center air handling system. We would be interested in hearing any comments you may

have on this installation manual, product, or overall experience. Please call or e-mail our Technical Service

Department:

Phone: 410-799-4200

E-mail: [email protected]

SAFETY

Wear personal protective equipment (PPE) as applicable during installation. PPE may include gloves,

safety eyeglasses, hardhats, or additional equipment depending on exact job site conditions.

Do not leave the site unattended until the installation is complete.

All work conducted on units should only be conducted by a trained professional.

Modifying equipment other than in ways suggested and approved by Tate are not recommended or

supported and may damage equipment or cause harm.

It is recommended that the on board battery pack is tested yearly to ensure proper function and

failsafe operation. (As described in the Troubleshooting Section.)

It is recommended that the on board battery pack is replaced by a trained professional at least once

every five years to ensure proper function and failsafe operation.

Batteries should be disposed of by an approved technician.

Regulations vary for different countries, Dispose of in accordance with local regulations.

Environmental Conditions:

Ambient Operational & Storage conditions:

oTemperature (°c) : 5 to 45

oRelative humidity (%): 20 to 80

CAUTION

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT BATTERY TYPE.

DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS AND LOCAL

ACCORDANCES

User Installation Manual

r1.9-3/11/15 SmartAire®MZ

Jessup, MD 20794

Tel (410)799-4200 4 of 26

SÉCURITÉ

Portez de l’équipement de protection individuelle (EPI) le cas échéant lors de l'installation. EPI peut

comprendre de gants, de lunettes de sécurité, de casques de sécurité, ou des équipements

supplémentaires en fonction des conditions du chantier exactes.

Ne laissez pas le site sans surveillance jusqu'à ce que l'installation est terminée.

Pour tous les travaux sur les unités ne peut être réalisée par un professionnel qualifié.

Modification des équipements autres que de façon proposés et approuvés par Tate sont ni

recommandé ni supporté et peut endommager l'équipement ou causer un préjudice.

Il est recommandé que la batterie est testé chaque année pour assurer le bon fonctionnement et

l'exploitation à sécurité intégrée. (Comme décrit dans la section Dépannage.)

Il est recommandé que la batterie sois remplacé par un professionnel qualifié au moins une fois tous

les cinq ans afin d'assurer le bon fonctionnement et l'exploitation à sécurité intégrée.

Les batteries doivent être éliminés par un technicien agréé.

Les réglementations varient selon les pays, Eliminer conformément aux réglementations locales.

Conditions environnementales:

les conditions de fonctionnement et de stockage ambiantes:

oTempérature (° C): 5 à 45

oHumidité relative (%): 20 à 80

ATTENTION

RISQUE D'EXPLOSION SI LA BATTERIE EST REMPLACÉ PAR UNE TYPE DE BATTERIE

INCORRECT.

JETEZ LES BATTERIES USAGÉES SELON LES INSTRUCTIONS

User Installation Manual

r1.9-3/11/15 SmartAire®MZ

Jessup, MD 20794

Tel (410)799-4200 5 of 26

INCLUDED COMPONENTS

SmartAire MZ (x1)

16’ Temperature Sensors (x4)

Battery Backup system (x1)

Installation Guide

Black Zip ties (x10)

ADDITIONAL REQUIRED COMPONENTS

Tate DirectAire® Al or Tate DirectAire® (x1)

5x5mm Aluminum DirectAire® Screws (x4) or Steel DirectAire® Hangers (x2)

Power and Networking Cable (Plenum Rated Ethernet CAT5) (x1)

POE Capable Switch (IEEE 802.3af compliant) or POE Injector Module (IEEE 802.3af compliant) (x1):

Property

IEEE 802.3af

Power available at PD

12.95 W

Maximum power delivered by PSE

15.40 W

Voltage range (at PSE)

44.0–57.0 V

Voltage range (at PD)

37.0–57.0 V

Maximum current

350 mA

Maximum cable resistance

20 Ω (Category 3)

Power management

Three power class levels negotiated at initial connection

Derating of maximum cable ambient operating temperature

None

Supported cabling

Category 3 and Category 5

Supported modes

Mode A (endspan), Mode B (midspan)

REQUIRED TOOLS

Manual Philips Head Screw Driver

ADDITIONAL NOTES

It is recommended for installations with multiple SmartAire MZ units the MAC Address label (on side of

unit) and physical installation location is recorded during unpacking and installation. This will assist in

later coordinating the unit through the network connection.

User Installation Manual

r1.9-3/11/15 SmartAire®MZ

Jessup, MD 20794

Tel (410)799-4200 6 of 26

QUICK INSTALLATION –ALUMINUM DIRECTAIRE®

CABINET FACE

QUICK INSTALLATION –STEEL DIRECTAIRE®

CABINET FACE

User Installation Manual

r1.9-3/11/15 SmartAire®MZ

Jessup, MD 20794

Tel (410)799-4200 7 of 26

INITIAL SETUP

STEP 1: PREPARE THE JOB SITE

Please ensure the installment site is clean and free of obstructions.

Unpack unit and all accessories. Prepare zip ties and associated mounting hardware available nearby.

Prepare the DirectAire® or DirectAire® Al Panel and Installation Location.

HANDLE UNIT WITH CARE, DO NOT MANUALLY ADJUST DAMPER BLADES,

SUPPORT OR LIFT UNIT BY DAMPER BLADES.

MANIPULER L’UNITÉ AVEC SOIN, NE PAS AJUSTER LES LAMES DU REGISTRE

MAUNELLEMENT, NE PAS SOUTENIR OU LEVER L’UNITÉ PAR LES LAMES.

Mounting hardware not included in SmartAire MZ kit. Must be ordered separately.

User Installation Manual

r1.9-3/11/15 SmartAire®MZ

Jessup, MD 20794

Tel (410)799-4200 8 of 26

STEP 2: ROUTE THE TEMPERATURE SENSORS

Route the temperature sensor Cables through a grommet and bring the sensors to the face of the rack.

STEP 3: ATTACH THE SENSORS TO THE RACK FACE

Mount each sensor within the corresponding zone of the SmartAire 2 and the rack. Zone 1 is the bottom of

the rack and Zone 4 is the top of the rack. Zip ties can be used to assist in mounting the sensors. The sensor

face should be directed downward if possible, but the sensor will work in other configurations as well.

NOTE: ZONE 1 MUST BE INSTALLED AT THE BOTTOM OF THE RACK AND ZONE 4

MUST BE ISNTALLED AT THE TOP FOR A TYPICAL QUAD MODE INSTALLATION

NOTE: ZONE 1 DOIT ÊTRE INSTALLÉ AU BAS DE LA PORTE, ET ZONE 4 DOIT ÊTRE

INSTALLER AU SOMMET POUR UNE INSTALLATION QUAD MODE TYPIQUE

User Installation Manual

r1.9-3/11/15 SmartAire®MZ

Jessup, MD 20794

Tel (410)799-4200 9 of 26

STEP 4: CONNECT THE SENSORS TO THE TREE

Connect temperature sensors to the temperature tree on the respective ports which are marked with flags

with corresponding colors and numbers. Continue with all four sensors

STEP 5: CONNECT THE TREE TO THE SMARTAIRE® MZ

Though the hole in the floor where the SmartAire is to be installed, Connect the temperature tree into the

“SENSOR PORT”. The Sensor will only connect in one orientation, with “1” And “8” on the top of the plug.

NOTE: WHEN DISCONNECTING THE PLUG THERE IS A SMALL PUSH BUTTON

RELEASE ON THE BOTTOM OF THE CONNECTOR WHICH WILL ALLOW IT TO

DISCONNECT. EXCESSIVE FORCE MAY DAMAGE THE CABLE OR CONNECTOR.

NOTE: POUR DÉBRANCHER LA FISHE, IL Y A UN PETIE BOUTON POUSSOIR SUR LE

BAS DU CONNECTEUR QUI LUI PERMETTERA DE SE DÉCONNECTER. UNE FORCE

EXCESSIVE PEUT ENDOMMAGER LE CÂBLE OU CONNECTEUR

“1” & “8” On top of Plug

User Installation Manual

r1.9-3/11/15 SmartAire®MZ

Jessup, MD 20794

Tel (410)799-4200 10 of 26

STEP 6: TURN THE BATTERY ON

Switch the Battery backup to the “ON” Position.

IT IS NECESSARY TO HAVE THE BATTERY IN THE

“ON” POSITION

DURING NORMAL OPERATION

IL EST NÉCESSAIRE D’AVOIR LA BATTERIE DANS LA POSITION ”ON” PENDANT LE

FONCTIONNEMENT NORMAL

Autres manuels pour SmartAire MZ Basic

Table des matières

Manuels Climatiseur populaires d'autres marques

Spheros

Spheros CC 355 Manuel utilisateur

Bosch

Bosch Climate 5000 SCI 24 CAS/ OU- OUE Manuel utilisateur

Panasonic

Panasonic CS-E12HKEW Manuel utilisateur

nedis

nedis ACMB1WT7 Manuel utilisateur

Samsung

Samsung AR KV Series Mode d’emploi

Daikin

Daikin FCFV50A Manuel utilisateur

Fujitsu

Fujitsu Inverter ASBA30JFC Manuel utilisateur

Toshiba

Toshiba RAS-M10SMUV-E Manuel utilisateur

Daikin

Daikin FXLQ20MAVE Manuel utilisateur

Hitachi

Hitachi RAS-E24CAK Manuel utilisateur

CIAT

CIAT Magister 2 Series Mode d’emploi

Bestron

Bestron AAC6000 Manuel utilisateur

Hisense

Hisense 7K Manuel technique

Frigidaire

Frigidaire FFRE0533S1E0 Manuel utilisateur

Samsung

Samsung AS09HM3N Manuel utilisateur

Frigidaire

Frigidaire CRA073PU11 Manuel du propriétaire

Soleus Air

Soleus Air GB-PAC-08E4 Manuel utilisateur

McQuay

McQuay MCK020A Manuel utilisateur