Tascam DP-01 Manuel utilisateur

DP-01 • DP-01FX • DP-01FX/CD

RECORDING A TRACK

• Connect powered speakers or an amplifier to the LINE OUT.

• Connect your audio source into MIC IN, or LINE/GUITAR IN L preferably

something that will continue playing like a CD player, Tape Deck, Tape out or

Record out from a stereo receiver.

• Move all the faders up to the grey line.

• Press and hold down the ASSIGN A button (the light should be blinking)

simultaneously press the REC button above channel number 1 (the light should

be blinking). Both lights should be blinking together

• Release the ASSIGN A and the REC button

• Press the REC button above channel 1 (the light should be blinking by itself)

• You should see the meters moving with in the display above Input A and Track

• Press the REWIND BUTTON twice until the display reads ABS 00.00.00.00

• Press and hold the RECORD button and simultaneously press the PLAY button

the REC light above channel one, the PLAY light and the RECORD light should

become solid.

• After recording press the STOP button. Press the REWIND button twice until the

display reads ABS 00.00.00.00

• Press the PLAY button.

You should hear what you recorded.

To record to other tracks:

• Press and hold down the ASSIGN A button (the light should be blinking)

simultaneously press the REC button above new channel number (the light

should be blinking). Both lights should be blinking together

• Release the ASSIGN A and the REC button

• Press the REC button above new channel (the light should be blinking by itself)

• You should see the meters moving with in the display above Input A and the

new track.

• Press the REWIND BUTTON twice until the display reads ABS 00.00.00.00

• Press and hold the RECORD button and simultaneously press the PLAY button

the REC light above channel one, the PLAY light and the RECORD light should

become solid.

• After recording press the STOP button. Press the REWIND button twice until the

display reads ABS 00.00.00.00

• Press the PLAY button.

You should hear what you recorded.

MASTERING

• Use the channel faders to set the level for each track.

• Turn the PAN knobs to adjust the stereo position for each track.

• Use the EQ HIGH and EQ LOW knobs to adjust the tone of each track.

• Use the EFFECT SEND knob to send a track to an external effects processor (if

attached) or built-in reverb (DP-01FX only). Use the EFFECT RETURN knob

to control the overall level of the effect.

• FAST FORWARD to the end of your song.

• Press the SHIFT button and simultaneously press the SET OUT button.

• Press the REWIND button twice.

• Press the MASTER button. It will start flashing.

• Press the RECORD button and simultaneously press the PLAY button.

• As your mix is being recorded, you can change levels, panning, effects and even

fade the Master level down at the end of the song. When the recorder reaches the

end of the song (which you set using the SET OUT button), recording will stop.

• Press the MASTER button again. It will light up solid. You can rewind to the

beginning of the song and listen to the mix you just recorded.

EXPORTING A MASTER TO A PC OR MAC

Do not connect the USB cable to the computer until instructed to.

Transferring files to the FAT partition:

Tracks have to be transferred to the Fat partition so that it can be read by the computer.

• Press the MASTER button until the light is OFF

• Press MENU

• Select the WAVE

• Press the RIGHT ARROW

• Select EXPORT MASTER

• Press the RIGHT ARROW.

• The display shows a list of suggested file names, based on the song tracks that

have been MASTERED

• Select the MASTER you wish to export

• Press ENTER/YES.

The display shows the free space on the FAT partition (the destination of the exported

tracks) and the space which the exported tracks will occupy.

USB Open and Close:

The DP-01 has to be in USB OPEN so that the computer can access the FAT partition.

While the system is in USB OPEN, you cannot perform any operations involving the DP-

01 hard disk (recording, playback, REW, FFW etc.)

• Press MENU

• Select DISK.

• Press the RIGHT ARROW

• Select USB OPN/CLS

• Press the RIGHT ARROW

• Press ENTER/YES to enable USB/OPEN. A popup message appears, asking if

you are sure.

• Press ENTER/YES again:

• The DP-01 is now in USB OPEN mode until you press EXIT/NO.

Accessing files from the computer:

• Connect the USB cable to the COMPUTER

• On the PC open MY COMPUTER. On a MAC a hard drive Icon will appear on

your desktop.

• Click on the removable drive Icon labeled DP-01

• Open the WAVE folder.

Use the computer’s operating system to copy the exported tracks from the WAVE

directory to the computer.

Autres manuels pour DP-01

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Tascam Équipement d'enregistrement

Tascam

Tascam CC-222MK Manuel utilisateur

Tascam

Tascam Digital Portastudio DP-03SD Manuel utilisateur

Tascam

Tascam HD-R1 Mode d’emploi

Tascam

Tascam MX-2424 Manuel utilisateur

Tascam

Tascam DR-10C Manuel utilisateur

Tascam

Tascam DR-V1HD Manuel utilisateur

Tascam

Tascam CD-RW900mkII Manuel utilisateur

Tascam

Tascam MX-2424 Guide de démarrage rapide

Tascam

Tascam US-1x2 Manuel utilisateur

Tascam

Tascam US-428 Manuel de service

Tascam

Tascam BR-20 Series Manuel

Tascam

Tascam SS-R1 Manuel utilisateur

Tascam

Tascam DR-680 Manuel utilisateur

Tascam

Tascam GT-R1 Instructions d'installation et d'utilisation

Tascam

Tascam DR-07 Manuel utilisateur

Tascam

Tascam MiNiSTUDIO PERSONAL US-32 Manuel utilisateur

Tascam

Tascam GB-10 Manuel utilisateur

Tascam

Tascam DA-P1 Manuel utilisateur

Tascam

Tascam DA-98HR Manuel utilisateur

Tascam

Tascam US-2400 Manuel utilisateur

Tascam

Tascam US-224 Manuel utilisateur

Tascam

Tascam LR-10 Mode d’emploi

Tascam

Tascam Porta02 MiniStudio Manuel utilisateur

Tascam

Tascam US-1200 Manuel utilisateur

Manuels Équipement d'enregistrement populaires d'autres marques

KV2 Audio

KV2 Audio 500 Series Manuel utilisateur

Robotics Technologies

Robotics Technologies microBus-Cam II Manuel utilisateur

Seca

Seca 460 Manuel utilisateur

Cognex

Cognex MVS-8000 Series Manuel utilisateur

Mect

Mect MPNC006 Series Manuel utilisateur

Bad Caf

Bad Caf THE LEASH Manuel utilisateur

Strymon

Strymon NIGHTSKY Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Manuel utilisateur

Tews Technologies

Tews Technologies TPMC465 Manuel utilisateur

Honeywell

Honeywell Excel 50 Manuel utilisateur

SeaLevel

SeaLevel COMM+8.LPCI Manuel utilisateur

Arturia

Arturia AUDIOFUSE STUDIO Manuel utilisateur

Rukra

Rukra RK-1240 Manuel utilisateur

Samson

Samson SCOM Manuel utilisateur

Dynacord

Dynacord DPS260 Manuel utilisateur

Nice

Nice Core Manuel utilisateur

Pyle Pro

Pyle Pro PSS8 Manuel utilisateur

RF-System

RF-System TinyGate Manuel d'utilisation et d'entretien