Tascam BB-1000CD Manuel utilisateur

D01061020A

BB-1000CD

Portable CD/SD Recorder

OWNER'S MANUALOWNER'S MANUAL

BB-1000CDEn.indd1BB-1000CDEn.indd1 09.2.32:19:28PM09.2.32:19:28PM

2 TASCAM BB-1000CD

IMPORTANT SAFETY PRECAUTIONS

The exclamation point within an equilateral triangle is intended to alert the user to

the presence of important operating and maintenance (servicing) instructions in

the literature accompanying the appliance.

The lightning flash with arrowhead symbol, within equilateral triangle, is intended

to alert the user to the presence of uninsulated “dangerous voltage” within the

product’s enclosure that may be of sufficient magnitude to constitute a risk of

electric shock to persons.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING

TO QUALIFIED SERVICE PERSONNEL.

WARNING: TO PREVENT FIRE OR SHOCK

HAZARD, DO NOT EXPOSE THIS

APPLIANCE TO RAIN OR MOISTURE.

This appliance has a serial number located

on the rear panel. Please record the model

number and serial number and retain them for

your records.

Model number

Serial number

TO THE USER

This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to Part 15

of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and

can radiate radio frequency energy and, if not installed and

used in accordance with the instruction manual, may cause

harmful interference to radio communications. However, there

is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to

try to correct the interference by one or more of the following

measures.

a) Reorient or relocate the receiving antenna.

b) Increase the separation between the equipment and

receiver.

c) Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

d) Consult the dealer or an experienced radio/TV technician

for help.

CAUTION

Changes or modifications to this equipment not expressly

approved by TEAC CORPORATION for compliance could void

the user's authority to operate this equipment.

For U.S.A.

BB-1000CDEn.indd2BB-1000CDEn.indd2 09.2.32:19:28PM09.2.32:19:28PM

TASCAM BB-1000CD 3

IMPORTANT SAFETY INSTRUCTIONS

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings.

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with dry cloth.

7 Do not block any ventilation openings. Install in

accordance with the manufacturer's instructions.

8 Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including

ampliﬁers) that produce heat.

9 Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades

with one wider than the other. A grounding type plug

has two blades and a third grounding prong. The wide

blade or the third prong are provided for your safety. If

the provided plug does not ﬁt into your outlet, consult

an electrician for replacement of the obsolete outlet.

10 Protect the power cord from being walked on

or pinched particularly at plugs, convenience

receptacles, and the point where they exit from the

apparatus.

11 Only use attachments/accessories specified by the

manufacturer.

12 Use only with the cart, stand, tripod, bracket, or

table speciﬁed by the manufacturer, or sold with the

apparatus. When a cart is used, use caution when

moving the cart/apparatus combination to avoid injury

from tip-over.

13 Unplug this apparatus during lightning storms or when

unused for long periods of time.

14 Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has

been exposed to rain or moisture, does not operate

normally, or has been dropped.

Do not expose this apparatus to drips or splashes.

•

Do not place any objects filled with liquids, such as

•

vases, on the apparatus.

Do not install this apparatus in a confined space such

•

as a book case or similar unit.

The apparatus draws nominal non-operating power

•

from the AC outlet with its POWER or STANDBY/ON

switch not in the ON position.

The apparatus should be located close enough to the

•

AC outlet so that you can easily grasp the power cord

plug at any time.

The main plug is used as the disconnect device, the

•

disconnect device shall remain readily operable.

An apparatus with Class I construction shall be

•

connected to an AC outlet with a protective grounding

connection.

Batteries (battery pack or batteries installed) should not

•

be exposed to excessive heat such as sunshine, fire or

the like.

Excessive sound pressure from earphones and head-

•

phones can cause hearing loss.

BB-1000CDEn.indd3BB-1000CDEn.indd3 09.2.32:19:29PM09.2.32:19:29PM

4 TASCAM BB-1000CD

Cautions about Batteries

This product uses batteries. Misuse of batteries could

cause a leak, rupture or other trouble. Always abide by the

following precautions when using batteries.

Never recharge non-rechargeable batteries. The batter-

•

ies could rupture or leak, causing fire or injury.

When installing batteries, pay attention to the

•

polarity

indications (plus/minus (+/–) orientation), and install

them correctly in the battery compartment as indicated.

Putting them in backward could make the batteries

rupture or leak, causing fire, injury or stains around

them.

When throwing used batteries away, follow the disposal

•

instructions indicated on the batteries and the local

disposal laws. When you store or dispose batteries, isorate

their terminals with insulation tape or something like that

to prevent them from contacting other batteries or metalic

objects.

Do not use batteries other than those specified. Do not

•

mix and use new and old batteries or different types of

batteries together. The batteries could rupture or leak,

causing fire, injury or stains around them.

Do not carry or store batteries together with small metal

•

objects. The batteries could short, causing leak, rupture

or other trouble.

Do not heat or disassemble batteries. Do not put them

•

in fire or water. Batteries could rupture or leak, causing

fire, injury or stains around them.

If the battery fluid leaks, wipe away any fluid on the

•

battery case before inserting new batteries. If the

battery fluid gets in an eye, it could cause loss of

eyesight. If fluid does enter an eye, wash it out thor-

oughly with clean water without rubbing the eye and

then consult a doctor immediately. If the fluid gets on a

person’s body or clothing, it could cause skin injuries or

burns. If this should happen, wash it off with clean water

and then consult a doctor immediately.

The unit power should be off when you install and

•

replace batteries.

Remove the batteries if you do not plan to use the unit

•

for a long time. Batteries could rupture or leak, caus-

ing fire, injury or stains around them. If the battery fluid

leaks, wipe away any fluid on the battery compartment

before inserting new batteries.

Small children may mistakenly swallow a lithium coin•

battery and it is very dangerous. Keep the battery and

the remote control out of the reach of small children. In

the event a battery is swallowed, immediately consult a

physician.

IMPORTANT SAFETY PRECAUTIONS

BB-1000CDEn.indd4BB-1000CDEn.indd4 09.2.32:19:29PM09.2.32:19:29PM

TASCAM BB-1000CD 5

IMPORTANT SAFETY PRECAUTIONS

This product has been designed and manufactured accord-

ing to FDA regulations “title 21, CFR, chapter 1, subchap-

ter J, based on the Radiation Control for Health and Safety

Act of 1968”, and is classified as a class 1 laser product.

There is no hazardous invisible laser radiation during

operation because invisible laser radiation emitted inside of

this product is completely confined in the protective hous-

ings.

The label required in this regulation is shown at 1.

CAUTION

DO NOT REMOVE THE PROTECTIVE HOUSING•

USING A SCREWDRIVER.

USE OF CONTROLS OR ADJUSTMENTS•

OR PERFORMANCE OF PROCEDURES

OTHER THAN THOSE SPECIFIED HEREIN

MAY RESULT IN HAZARDOUS RADIATION

EXPOSURE.

IF THIS PRODUCT DEVELOPS TROUBLE,•

CONTACT YOUR NEAREST QUALIFIED

SERVICE PERSONNEL, AND DO NOT USE THE

PRODUCT IN ITS DAMAGED STATE.

CLASS 1M INVISIBLE LASER RADIATION•

WHEN OPEN AND INTERLOCKS DEFEATED.

DO NOT VIEW DIRECTLY WITH OPTICAL

INSTRUMENTS.

Optical pickup

Type : HOP-6201TC

Manufacturer : Hitachi Media Electronics Co,Ltd.

Laser output : Less than 75 mW on the objective lens (record)

Wavelength : 777 to 787 nm

BB-1000CDEn.indd5BB-1000CDEn.indd5 09.2.32:19:29PM09.2.32:19:29PM

6 TASCAM BB-1000CD

Playback

Listening to a disc

When playing back a disc, insert it and press the CD key.

You can use the unit when...

listening to a commercially available audio CD.

•

listening to a disc on which you recorded

• .

«page 19 “Playing back a disc (commercially available audio CD)”

page 36 “Playback”

Listening to les on an SD card

When playing back an audio file on an SD card, insert it and press the SD key.

You can use the unit when...

playing back an SD card containing WAV files and MP3 files.

•

playing back an SD card on which you recorded.

•

«page 30 “Inserting an SD card”

page 36 “Playback”

What types of files can this unit play back?

MP3 files and WAV files on an SD card can be played back.

«page 36 “Playable file format”

To select files to play back on an SD card

The unit plays only files in a folder which contains the currently playing file when you are using an SD card. You can select a

folder to playback on an SD card on the BROWSE screen.

«page 48 “Browsing an SD card”

What you can do with the unit

BB-1000CDEn.indd6BB-1000CDEn.indd6 09.2.32:19:29PM09.2.32:19:29PM

TASCAM BB-1000CD 7

Recording

Dierence between a disc and SD card

Same as a commercially available audio CD, sound is recorded on a disc in the CD-DA format. The disc can be played back

on a standard CD player.

You can record sound on an SD card on the WAV or MP3 format. You can record for a longer period of time by using the MP3

format though the sound quality is inferior to a CD's.

In addition, you can edit audio files on the SD card such as dividing them.

Recording on a disc

«page 38 “Recording”

What disc is recordable?

You can use a CD-R or CD-RW for recording.

«page 17 “About CD-R and CD-RW discs”

What is finalization?

To playback a disc recorded on the unit on another device, the process called finalization is required. You cannot record on a

CD-R disc any more after finalization. You can make a finalized CD-RW disc recordable again by unfinalizing it.

«page 47 “Finalizing a disc”

page 47 “Unfinalizing a CD-RW”

Recording on an SD card

«page 38 “Recording”

To record in higher sound quality

You can record in the same sound quality as that of a commercially available CD.

It is useful when...

recording a live performance, concert or recital.

•

«page 45 “Long time recording”

To record for a longer period of time

You can record longer in less file size by using the MP3 format.

It is useful when...

recording for many hours in a conference or event.

•

«page 45 “Long time recording”

What you can do with the unit

BB-1000CDEn.indd7BB-1000CDEn.indd7 09.2.32:19:29PM09.2.32:19:29PM

8 TASCAM BB-1000CD

Recording with the built-in microphones

To record sounds all around the unit by using the front and rear microphones

You can record sounds around the unit by using the built-in microphones on the front and rear. It is suitable when recording

the music played in a circle, placing the unit at the center of the circle. Select FRNT/REAR at SOURCE in the INPUT screen to

record sound using the front and rear microphones.

It is useful when...

recording sound of a small orchestra surrounding the unit.

•

recording sound of a band in a sound room placing the unit at its center.

•

recording a meeting.

•

«page 38 “Selecting the input”

To record sound using the front microphones only

It is suitable when recording a small band or solo play. Select FRNT/REAR at SOURCE in the INPUT screen and turn the

REAR MIC knob down to the minimum to record by the front microphones only.

It is useful when...

sound source exists in front of the unit only, such as in a private lesson or solo play.

•

recording sound of a big orchestra at a position such as the conductor's.

•

«page 38 “Selecting the input”

Recording with external microphones

When using external microphones, connect them to the EXT MIC jacks on the left side and select EXT/REAR at SOURCE in

the INPUT screen. Turn the REAR MIC knob down to the minimum. Slide the PHANTOM switch to ON when using condenser

microphones in addition.

It is useful when...

recording in high quality with using high-performance condenser microphones.

•

«page 35 “Connecting to the EXT MIC jacks”

page 38 “Selecting the input”

Recording the sound from an external device

To record the sound of a tape recorder or record player

You can record the playback sound of an external device such as a tape recorder or record player. Connect a device to the

LINE IN jack on the left side and select FRNT/LINE at SOURCE in the INPUT screen. Turn the FRONT MIC knob down to the

minimum.

You can give numbers to tracks automatically by using the auto recording function (page 44).

It is useful when...

copying sound on a cassette tape or MD on to a CD or SD card.

•

recording sound on media unplayable on this unit.

•

recording sound through the line output of an electric instrument.

•

«page 35 “Connecting to the LINE IN jack”

page 38 “Selecting the input”

What you can do with the unit

BB-1000CDEn.indd8BB-1000CDEn.indd8 09.2.32:19:30PM09.2.32:19:30PM

TASCAM BB-1000CD 9

Settings for exible recording

Adjusting recording level automatically

The recorded sound may distort when the input level is too high and it may become noisy when the level is too low. The level

control functions on the unit adjust the input level automatically according to the strength of input signals to get appropriate

volume.

It is useful when...

some speakers speak loudly and others low in a meeting or conference.

•

a loud sound comes out suddenly such as in a live performance.

•

«page 38 “Adjusting the input settings”

Adjusting recording level manually

Automatic adjustment of input level by the level control functions may result in a little bit unnatural sound volume. It is rec-

ommended to adjust the recording level manually to get better sound.

«page 39 “Ordinary recording”

Starting recording automatically

You can start recording automatically as sound comes in from microphones by using the automatic recording function.

It is useful when...

starting recording as sound comes out in a event or conference.

•

«page 44 “Auto recording”

Skipping silence while recording

You can set the unit to pause recording automatically when no sound comes in from microphones by using the automatic

recording function.

It is useful when...

you do not want to record silence in a meeting.

•

«page 44 “Auto recording”

Dividing recording les automatically

You can set the unit to make a new recording file as it detect silence for a certain moment by using the automatic recording

function.

It is useful when...

dividing recording files as presenters change in a conference.

•

dividing files per tracks without stopping playback during recording sound from a cassette tape or record.

•

«page 44 “Auto recording”

What you can do with the unit

BB-1000CDEn.indd9BB-1000CDEn.indd9 09.2.32:19:30PM09.2.32:19:30PM

10 TASCAM BB-1000CD

Assisting practice of an instrument

Tuning of an instrument

You can use the unit as a chromatic tuner or oscillator.

«page 41 “Using the Tuner”

Practicing with the metronome

You can use the unit as a metronome.

«page 41 “Using the Metronome”

Changing the playback speed

You can change the playback speed of a CD or SD card without changing the key.

It is useful when...

practicing in slow speed at first and gradually increasing the speed.

•

copying a quick musical phrase.

•

«page 42 “Changing the playback speed”

Changing the playback key

You can change the playback key without changing the playback speed.

It is useful when...

practicing in a higher or lower key.

•

«page 42 “Changing the playback key”

playing back a certain part of a song repeatedly

You can specify a section and play back it repeatedly.

It is useful when...

practicing a new phrase repeatedly.

•

listening to a difficult phrase repeatedly.

•

«page 37 “Loop playback (I-O LOOP)”

Skipping a track a little backward

You can skip back a few second while playing back a track by pressing the FLASHBACK key. The skip back time is adjustable

(1-5 seconds).

It is useful when...

missing an important phrase.

•

«page 36 “Skipping a track a little backward (FLASH BACK)”

page 50 “Adjusting the time of FLASH BACK”

What you can do with the unit

BB-1000CDEn.indd10BB-1000CDEn.indd10 09.2.32:19:30PM09.2.32:19:30PM

Autres manuels pour BB-1000CD

Table des matières

Autres manuels Tascam Équipement d'enregistrement

Tascam

Tascam SS-R1 Manuel utilisateur

Tascam

Tascam MMR-8 Manuel utilisateur

Tascam

Tascam DP-01 Manuel utilisateur

Tascam

Tascam LR-10 Mode d’emploi

Tascam

Tascam dr-44wl Manuel utilisateur

Tascam

Tascam Digital Portastudio DP-24 Manuel du propriétaire

Tascam

Tascam Digital Portastudio DP-24 Manuel utilisateur

Tascam

Tascam SS-R1 Manuel utilisateur

Tascam

Tascam MMR-8 Manuel utilisateur

Tascam

Tascam CD-RW901 Manuel utilisateur

Tascam

Tascam DP-24SD Manuel utilisateur

Tascam

Tascam Frontier HD-P2 Manuel de la liste des pièces

Tascam

Tascam HS-8 Comment utiliser

Tascam

Tascam DR-07MKII Comment utiliser

Tascam

Tascam 102i Series Manuel utilisateur

Tascam

Tascam BB-1000CD Comment utiliser

Tascam

Tascam DP-01 Manuel utilisateur

Tascam

Tascam HD-R1 Manuel utilisateur

Tascam

Tascam DR-10C Manuel utilisateur

Tascam

Tascam Digital Portastudio DP-03 Manuel utilisateur

Tascam

Tascam MX-2424 Manuel utilisateur

Tascam

Tascam DR-40 Manuel utilisateur

Tascam

Tascam HD-R1 Instructions d'installation et d'utilisation

Tascam

Tascam 246 Manuel utilisateur

Manuels Équipement d'enregistrement populaires d'autres marques

KV2 Audio

KV2 Audio 500 Series Manuel utilisateur

Robotics Technologies

Robotics Technologies microBus-Cam II Manuel utilisateur

Seca

Seca 460 Manuel utilisateur

Cognex

Cognex MVS-8000 Series Manuel utilisateur

Mect

Mect MPNC006 Series Manuel utilisateur

Bad Caf

Bad Caf THE LEASH Manuel utilisateur

Strymon

Strymon NIGHTSKY Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Manuel utilisateur

Tews Technologies

Tews Technologies TPMC465 Manuel utilisateur

Honeywell

Honeywell Excel 50 Manuel utilisateur

SeaLevel

SeaLevel COMM+8.LPCI Manuel utilisateur

Arturia

Arturia AUDIOFUSE STUDIO Manuel utilisateur

Rukra

Rukra RK-1240 Manuel utilisateur

Samson

Samson SCOM Manuel utilisateur

Dynacord

Dynacord DPS260 Manuel utilisateur

Nice

Nice Core Manuel utilisateur

Pyle Pro

Pyle Pro PSS8 Manuel utilisateur

RF-System

RF-System TinyGate Manuel d'utilisation et d'entretien