Tascam 12 Manuel utilisateur

TASCAM Model 12 1

Model 12

Checking the firmware version

Confirm the firmware version of your Model 12 before conducting a firmware update.

1. Turn the main unit on.

2. Press the MENU button to open the MENU Screen.

3. On the SYSTEM Screen, select INFORMATION to open the

Information Screen.

4. Turn the MULTI JOG dial to open the FIRMWARE screen.

5. Check the VERSION (system firmware version) on this

screen.

Updating is not necessary if the VERSION shown here is the

same or newer than the firmware version you intend to use

for the update.

NOTE

iThe screen shown above is an example. The actual

appearance will differ.

iFor details, see the“FIRMWARE screen”section of Chapter “10

– Settings and Information” in the Model 12 Owners Manual.

Firmware update procedures

1. Download the latest firmware from the TEAC Global Site

(http://teac-global.com/).

Decompress the downloaded file if it is in ZIP format or

another compressed file type.

2. Confirm that an SD card is loaded in the unit, turn the unit

on and connect it to the computer using a commercially-

available USB cable (Type-A - Type-C).

ATTENTION

The unit should be connected directly to the computer, not

through a USB hub. Moreover, noise could be picked up if the

cable is too long.

3. On the MENU Screen, select STORAGE to open the

STORAGE Screen.

4. To connect with the computer, press the F4 button.

The unit enters USB storage mode and connects with the

computer.

5. This unit appears on the computer as an external drive

named “TASCAM_M” (if the card was formatted by this unit).

Copy the downloaded firmware to the “UTILITY” folder on

“TASCAM_M”.

NOTE

The Model 12 firmware update file will have a name like

“Model12_XXXX.XXX”.

6. After copying, use the proper procedures for the computer

to unmount the unit.

See the computer’s operation manual for instructions about

how to unmount an external volume.

Press the F1 button to return to the Meter Screen.

Then, turn the unit off.

7. Turn the unit on while pressing the 8and mbuttons.

This will start the unit in update mode, and the update file

will appear on the display.

ATTENTION

iIf this screen does not appear, turn the power off once,

and turn the unit on again while pressing the 8and m

buttons. Keep pressing the 8and mbuttons until this

screen appears.

iIf the firmware was copied to the “UTILITY” folder from a Mac,

in addition to the firmware itself, another file with “._” before

the firmware name will also appear. Select the file without “._”

at the beginning.

NOTE

iThis screen shows a list of firmware update files in the

“UTILITY” folder in the unit. The firmware copied in step 5

above should also be shown.“No Update File”is shown if the

folder does not contain an update file.

iThe screen shown above is an example. The actual

appearance will differ.

0420.MA-3132A

2 TASCAM Model 12

Model 12

8. Turn the MULTI JOG dial to select the firmware, and press

the MULTI JOG dial. The screen shown below will appear.

The number of the current version is shown on the left and

the update version is shown on the right.

NOTE

The screen shown above is an example. The actual

appearance will differ.

9. Press the F4 button to start updating. (To cancel

updating, press the F1 button instead.)

CAUTION

iBe careful not to let the power be interrupted during the

update.

iDo not load or remove SD cards during the update.

iIf the power is interrupted or an SD card is loaded or removed

during the update, the unit might become unstartable.

10. When the update completes, the following message will

appear.

11. Press the POWER switch to turn the unit off. Then, turn it on

again.

12. Refer to“Checking the firmware version” and confirm that

the firmware has been updated to the latest version.

13. Connect the unit with a computer using USB, and delete

the firmware update file in the “UTILITY” folder.

This completes updating the unit.

Autres manuels pour 12

Autres manuels Tascam Équipement d'enregistrement

Tascam

Tascam SS-CDR250N Manuel utilisateur

Tascam

Tascam SS-R1 Manuel utilisateur

Tascam

Tascam TASCAM TA-1VP Manuel utilisateur

Tascam

Tascam PORTASTUDIO 788 Instructions d'installation et d'utilisation

Tascam

Tascam GT-R1 Instructions d'installation et d'utilisation

Tascam

Tascam SS-R1 Manuel utilisateur

Tascam

Tascam DR-60D Manuel utilisateur

Tascam

Tascam Frontier HD-P2 Instructions d'installation et d'utilisation

Tascam

Tascam DR-05 Manuel utilisateur

Tascam

Tascam CD-RW4U Manuel utilisateur

Tascam

Tascam CD-RW901 Manuel utilisateur

Tascam

Tascam Digital Portastudio DP-03SD Manuel utilisateur

Tascam

Tascam HS-2000 Manuel utilisateur

Tascam

Tascam CD-RW901SL Mode d’emploi

Tascam

Tascam HS-8 Instructions de montage

Tascam

Tascam MX-2424 Guide de démarrage rapide

Tascam

Tascam dr-44wl Manuel utilisateur

Tascam

Tascam DR-60D Manuel utilisateur

Tascam

Tascam CD-RW900 Manuel utilisateur

Tascam

Tascam Mixcast 4 Manuel utilisateur

Tascam

Tascam iXZ Manuel utilisateur

Tascam

Tascam PORTASTUDIO 788 Instructions de fonctionnement

Tascam

Tascam CD-RW901 Manuel utilisateur

Tascam

Tascam LR-10 Manuel utilisateur

Manuels Équipement d'enregistrement populaires d'autres marques

KV2 Audio

KV2 Audio 500 Series Manuel utilisateur

Robotics Technologies

Robotics Technologies microBus-Cam II Manuel utilisateur

Seca

Seca 460 Manuel utilisateur

Cognex

Cognex MVS-8000 Series Manuel utilisateur

Mect

Mect MPNC006 Series Manuel utilisateur

Bad Caf

Bad Caf THE LEASH Manuel utilisateur

Strymon

Strymon NIGHTSKY Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Manuel utilisateur

Tews Technologies

Tews Technologies TPMC465 Manuel utilisateur

Honeywell

Honeywell Excel 50 Manuel utilisateur

SeaLevel

SeaLevel COMM+8.LPCI Manuel utilisateur

Arturia

Arturia AUDIOFUSE STUDIO Manuel utilisateur

Rukra

Rukra RK-1240 Manuel utilisateur

Samson

Samson SCOM Manuel utilisateur

Dynacord

Dynacord DPS260 Manuel utilisateur

Nice

Nice Core Manuel utilisateur

Pyle Pro

Pyle Pro PSS8 Manuel utilisateur

RF-System

RF-System TinyGate Manuel d'utilisation et d'entretien