TAO TT-BS017 Manuel utilisateur

Contents --------------------------------------------------------------------------------------------------------------------------1

Production Introduction -----------------------------------------------------------------------------------------2

About TT-BS017 Wireless Barcode Scanner----------------------------------------------------2

Package Includes ------------------------------------------------------------------------------------------------------2

Product Diagram --------------------------------------------------------------------------------------------------------2

Technical Specifications ------------------------------------------------------------------------------------------3

How to Use -----------------------------------------------------------------------------------------------------------------3~4

Charging the Scanner ----------------------------------------------------------------------------------------------5

Scanner Setup ------------------------------------------------------------------------------------------------------------5

Single scanner to single receiver ------------------------------------------------------------------------- 5

Single scanner to multiple receivers --------------------------------------------------------------------6

Multiple scanners to single receiver ---------------------------------------------------------------------6

Set Scanner ID ----------------------------------------------------------------------------------------------------------6

Set Auto-off Time ----------------------------------------------------------------------------------------------------7~8

Add Prefix -------------------------------------------------------------------------------------------------------------------9

Add Suffix -----------------------------------------------------------------------------------------------------------------9~10

Hide the Starting Characters ---------------------------------------------------------------------------- 10~11

Hide the Last Characters ------------------------------------------------------------------------------------11~12

Other functions/modes ------------------------------------------------------------------------------------------- 12

Inventory Mode ------------------------------------------------------------------------------------------------------- 12

Data Transfer ----------------------------------------------------------------------------------------------------------- 14

Back to Normal Mode -------------------------------------------------------------------------------------------- 15

Reset Your Scanner------------------------------------------------------------------------------------------------ 15

Deep Sleep Mode --------------------------------------------------------------------------------------------------- 16

Technical Assistance --------------------------------------------------------------------------------------------- 16

Warranty ------------------------------------------------------------------------------------------------------------------------- 16

Statement --------------------------------------------------------------------------------------------------------------------- 16

Appendix – Barcodes ------------------------------------------------------------------------------------------16~25

02/03

• With long range wireless connection (up to 500m in open space), you can work within

a large area without limitation of cables or even computers.

• Large internal storage can save up to 32,000 barcodes in inventory mode

• Designed for team work with supports for multiple scanner with a single receiver, multiple

receiver to a single scanner and multiple scanner to multiple receiver connection

• Extra toughness with industrial-grade shock proof design that can withstand multiple

consecutive 3m free fall drop test.

• Support USB, PS2, RS232 data interfaces

• FCC, CE, ROHS Certification

4. Once the driver installed successfully, scan the “Match ADD” scanner WITHIN 5

seconds. Now the pairing is done

04/05

Charging the Scanner

Scanner Steup

3. Scan “Set Receiver’s ADD” Barcode WITHIN 5 seconds.

4. This will connect the 2nd receiver to the same scanner

5. Repeat step 2 to 3 for the remaining unpaired scanners.

Set Receiver’s Add

- You can connect maximum of 16 scanners with one receiver simultaneously.

Set Scanner ID

To avoid confusion when using multiple scanners, you can assign a unique ID

for each scanner. Scanner ID consists of up to 3 digits (0 – 9). The scanner ID

will appear as prefix before each scan result.

2.Set the scanner ID by scan a combination of up to 3 digits from the following

barcodes. You can set a single digit, two digits or 3 digits scanner ID. For example,

if you want to set the scanner with ID “68”, then please scan “6” and then “8”

successively.

Here’s the bar code list of the ID digit:

Set Scanner ID

06/07

3. Once you have scanned the scanner ID, please scanner the “Show Scanner

ID” barcode to enable the scanner ID.

1. Scan “Set Device ID” bar code.

1. Scan “Set Auto-off Time” bar code

Set Auto-off Time

2. Scan the time barcode from the following list

08/09

3.Now the scanner will be automatically powered off in the time you set.

4. Now your scanner will automatically adds the scanner ID as prefix to all scan

results. To disable the scanner ID, you can scan the “Hide Scanner ID” barcode

2 seconds (default) 10 seconds

20 seconds 30 seconds

60 seconds 2 minutes

5 minutes 10 minutes

20 minutes Never

Show Scanner ID

Hide Scanner ID

10/11

1.Scan “Hide Starting Characters” setting code

Hide the Starting Characters

“Hide Starting Characters”

setting code

Inventory Mode Setting Steps

To use the scanner in inventory mode you must first pair the scanner with at least one

receiver. To do that, please follow the previous instructions on pairing a single scanner

with a single receiver.

Once the scanner is successfully paired with a receiver, there are 2 ways to get into

inventory mode. You can use either method.

12/13

• Method 2

Press and hold the trigger until you see the red LED start flashing, then release the trigger.

The LED light will turn into solid blue, which means the scanner is in inventory mode.

Once the scanner is in inventory mode, all scanned barcode will be saved to scanner’s

internal memory.

• Method 1 (recommended)

Simply scan the “Inventory Mode” bar code to enter into inventory mode. The LED will

turn to solid BLUE.

Notes:

• In normal mode, if three consecutive data uploading failure occur, the scanner will

switch into Inventory Mode automatically.

• In inventory mode, for each successful scan, the scanner will make 2 “Di” sound

(only 1 in normal mode)

• When using the 2nd method to get into inventory mode, it is possible to accidentally

set the scanner to enter deep sleep mode if you keep holding the trigger for too long.

(Please see Page 14 to check Deep sleep mode)

It is important to set frequency channel for each receiver to avoid signal interference. We

recommend set frequency channel for each scanner if you have more than 2 receivers

working in inventory mode in the same area.

1.To set the frequency channel for the first receiver, take the scanner that is paired to the

receiver and scan “Set Frequency channel” bar code.

2. Scan one of the channel listed

Set Frequency Channel

Channel 01 Channel 02 Channel 03

Channel 04 Channel 05 Channel 06

Channel 07 Channel 08 Channel 09

Channel 10 Channel 11 Channel 12

Channel 13 Channel 14 Channel 15

Channel 16 Channel 17 Channel 18

Channel 19 Channel 20 Channel 21

Channel 22 Channel 23 Channel 24

Set Frequency Channel in Inventory Mode

3. The receiver is now set to the frequency channel you have scanned

4. If you have more than 1 scanner paired to this receiver, please use each

scanner (exclude the one you have just used) to scan the match ADD barcode

5. Repeat step 1 – 4 for every receiver in use in the same area

Once you have finished scanning, you can upload saved data to a computer

3.If you wish to scan all barcodes saved in the scanner, please scan the “upload all data”

barcode

4. If you wish to clear all saved barcode, you can scan the “Clear all data” barcode

5.You can scan the data count barcode to know how many barcode is saved in the scanner

In order to get back to normal mode from inventory mode, there are 2 methods as well.

Please choose either one of the following 2 methods:

• Simply scan the “Inventory Mode” bar code. The LED will turn to solid red.

• Press and hold the trigger for 8 seconds without letting go until the LED light turns into

red, which means the scanner is already in normal mode.

“Inventory mode” bar code

Match Add

“Upload all data” barcode

Clear all data

Data Count

14/15

Channel 25 Channel 26 Channel 27

Channel 28 Channel 29

Channel 31 Channel 32

Channel 30

Deep Sleep Mode

• Press and hold the trigger for 11 seconds or more will cause the scanner to enter deep

sleep mode. During deep sleep mode, scanner will not respond to single trigger press

• To exit deep sleep mode, press and hold the trigger for 3 seconds to wake up the

scanner

16/17

Reset

Appendix – Barcodes

Table des matières

Autres manuels TAO Lecteur de codes-barres

TAO

TAO TT-BSO16 Manuel utilisateur

Manuels Lecteur de codes-barres populaires d'autres marques

POSMicro

POSMicro Datalogic PowerScan D7100 Manuel utilisateur

Marson

Marson MT780 Guide de configuration rapide

NCR

NCR RealPOS Manuel utilisateur

Motorola

Motorola SE3300 Guide de configuration rapide

Element

Element P130BT Manuel utilisateur

Motorola

Motorola Symbol LS3008 Manuel d'installation et d'exploitation

Meec tools

Meec tools OBD-II / VAG Manuel utilisateur

SICK

SICK CLP 100 Manuel utilisateur

Royal Tag SA

Royal Tag SA I-Read Manuel utilisateur

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manuel utilisateur

Meteor

Meteor 8310 Manuel utilisateur

Denso

Denso BHT-500B Manuel utilisateur

Datalogic

Datalogic Heron HD3130 Manuel utilisateur

Motorola

Motorola MP6000 Instructions de montage

Newland

Newland NLS-HR15-BT Manuel utilisateur

ARTDEV

ARTDEV AS-1310 Manuel utilisateur

Aopos

Aopos AS290 Manuel utilisateur

ENS

ENS 367-5455 Manuel utilisateur