Tangye PS620 Manuel utilisateur

Original Instructions

for

Hydralite Jacks

Revision 2 –Issue 1

(MOD 21237)

Allspeeds Ltd.

Royal Works, Atlas Street

Clayton Le Moors, Lancashire, UK.

BB5 5LW

01254 615100

Allspeeds Document - Tangye Hydralite Manual Page 2 of 27

Rev 1. Issue 1. Date: 01/07/2021

Table of Contents

1Scope.......................................................................3

2Technical Data..........................................................4

2.1 Jack Weights..................................................................4

2.2 Oil Requirements...........................................................4

2.3 Environmental Considerations ......................................4

2.4 Noise and Vibration.......................................................4

3Declaration of Conformity ........................................5

4General Safety Rules ................................................6

4.1 Warnings........................................................................6

4.2 Important Information ..................................................6

4.3 General Safety ...............................................................6

4.4 Warning Symbols...........................................................7

4.5 Pinch Points ...................................................................8

5Operating Instructions..............................................9

5.1 Before Use .....................................................................9

5.2 Check Oil Level.............................................................10

5.3 Positioning the Jack.....................................................11

5.4 Raising the Jack............................................................14

5.5 Lowering the Jack ........................................................18

5.6 Jacks with Screwed Rams (Type S) ..............................19

5.7 Jacks with Lifting Claws (Type C) .................................20

5.8 100 Tonne Jacks Only ..................................................22

6After Use................................................................23

7Maintenance..........................................................24

8Parts List................................................................26

8.1 Seal Kit Components....................................................26

10 Decommissioning...................................................27

Allspeeds Document - Tangye Hydralite Manual Page 3 of 27

Rev 1. Issue 1. Date: 01/07/2021

1Scope

This manual covers the operation and maintenance of the

Hydralite range of Tangye hydraulic lifting jacks.

The Hydralite range are lightweight, moveable jacks designed

to lift heavy loads with low effort and maximum safety. These

jacks are not designed to be moved whilst under load.

These jacks are designed in accordance with BS EN 1494:2000

+A1 2008 –the British Standard for “Mobile or moveable

jacks and associated lifting equipment”

Please read carefully and work in accordance with this

instruction booklet and keep in a safe place for future

reference.

It is the responsibility of the purchaser to ensure that

operators are properly trained in the safe use of this

equipment and have access to this document.

No modification and/or additions may be made to this

equipment without the written permission of the

manufacturer.

It is expected that the product is used by competent technical

personnel who have been properly trained to use hydraulic

lifting equipment.

Allspeeds Document - Tangye Hydralite Manual Page 4 of 27

Rev 1. Issue 1. Date: 01/07/2021

2Technical Data

2.1 Jack Weights

Important: Ensure the correct Manual Handling procedures

are carried out when handling the jacks. Where a jack has a

claw attachment, the claw should be removed from the jack

and lifted separately.

The weight of the jack is marked on the nameplate affixed to

the jack base. All jacks have lifting handles and these should

be used during transportation. Larger jacks may need to be

moved by two people.

2.2 Oil Requirements

The Hydralite range of hydraulic jacks contain nitrile seals and

should only be used with good quality hydraulic oil (e.g. Shell

Tellus 32). For compatibility with any other fluid, please

contact the manufacturer.

2.3 Environmental Considerations

The jack is intended for use in industrial environments, inside

or outside, between temperatures of –20 to +50°C. The jack

should not be used outside these limits or in explosive

atmospheres/areas of nuclear radiation.

2.4 Noise and Vibration

By its design, the jack operates slowly under manual effort.

There is no noticeable noise or vibration. The noise level does

not exceed 70 dB(A).

3Declaration of Conformity

4General Safety Rules

4.1 Warnings

These warning are provided to improve safety and should be

carefully read before using or maintaining the equipment.

4.2 Important Information

It is vital that these instructions are available to the

equipment users. It is also important that they are retained

with the equipment if it is sold or transferred to another user.

Allspeeds LTD will not be held responsible for any damage to

the equipment or personal injury resulting from unsafe use of

the product, lack of maintenance or incorrect operation.

4.3 General Safety

To prevent the risk of injury, the jack should only be used by

fully trained and competent operators.

•Make sure that all safety devices are in place and

functioning correctly

•Make sure the working area is adequately lit and is

free of any obstructions

•Only operate the jack in a safe working environment

and not during poor weather conditions. (Do not

operate during rain/lightning/excessive heat etc.)

•The jack should not be used for the lifting of persons

Recommended PPE for operation and maintenance includes

safety shoes, safety glasses and gloves.

Allspeeds Document - Tangye Hydralite Manual Page 7 of 27

Rev 1. Issue 1. Date: 01/07/2021

Any spilt oil may create a slipping or tripping hazard. Care

must be taken around the work area.

4.4 Warning Symbols

General Hazard.

Hydraulic tool with inherently dangerous

moving parts.

Crushing Hazard

Do not put hand between jack and object

being lifted.

Tipping Hazard

Ensure jack is on level, smooth surface to

prevent tipping.

Lowering Hazard

Do not place anything under jack while

loaded unless mechanically locked

(With screw type jack etc.)

Allspeeds Document - Tangye Hydralite Manual Page 8 of 27

Rev 1. Issue 1. Date: 01/07/2021

4.5 Pinch Points

Care should be taken to avoid the two pinch points between

the operating quadrant and the jack body.

Keep all body parts away from these areas when operating

the jack to avoid injury.

Figure 1 –Pinch Points on the Jack

Allspeeds Document - Tangye Hydralite Manual Page 9 of 27

Rev 1. Issue 1. Date: 01/07/2021

5Operating Instructions

5.1 Before Use

•Visually inspect the jack to ensure that it is in good

condition.

•Check the external surfaces for mechanical damage and/or

oil leaks. If either is present do not use the equipment and

have the jack serviced.

•Ensure that the external surfaces are dirt free.

•Ensure the work area is clear and free from obstructions.

•Ensure the operator can watch the lifting device and the

load during all movements.

Allspeeds Document - Tangye Hydralite Manual Page 10 of 27

Rev 1. Issue 1. Date: 01/07/2021

5.2 Check Oil Level

The oil level should be checked with the ram fully descended.

The dipstick should be screwed fully into position prior to

testing to determine the level.

Remove the dipstick and check the oil level as shown in Figure

2. The maximum level is marked on the dipstick; the oil level

should be between this mark and the bottom of the dipstick.

If oil needs to be added, ensure that the surrounding area is

clean. Use high quality hydraulic oil such as Shell Tellus ISO 32

or equivalent.

Figure 2 –Removing and Checking the Dipstick

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Tangye Pompe à eau

Tangye

Tangye HYDRAPAK Manuel utilisateur

Manuels Pompe à eau populaires d'autres marques

Neptun

Neptun NPHW 5500 Manuel utilisateur

Sensidyne

Sensidyne Gilian BDX-II Instructions d'installation et d'utilisation

Draper

Draper 47808 Manuel utilisateur

Trolla

Trolla 12820 Manuel utilisateur

Sunfab

Sunfab SVH Series Manuel utilisateur

WilTec

WilTec 50740 Manuel utilisateur

Fieldmann

Fieldmann FVC 5015 EK Manuel utilisateur

Everbilt

Everbilt EFSUB5-122HD Manuel utilisateur

Graco

Graco Husky 3300e Manuel utilisateur

esotec

esotec 101018 Manuel utilisateur

moyno

moyno 2000 CC Manuel utilisateur

Becker

Becker BASIC VASF 2.80/1-0.AC230 Manuel utilisateur

Sykes AmeriPumps

Sykes AmeriPumps GP100M Guide de dépannage

DUROMAX

DUROMAX XP WX Series Manuel utilisateur

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Manuel utilisateur

Franklin Electric

Franklin Electric IPS Manuel utilisateur

Xylem

Xylem e-1532 Series Manuel utilisateur

Milton Roy

Milton Roy PRIMEROYAL Manuel utilisateur