Tailfin X Series Manuel utilisateur
X & S series rack assembly
Tailfin 2019 Assembly Instructions © TAILFIN 2019 1
Step 1 –Attach Dropouts to Rack
Tailfin 2019 Assembly Instructions © TAILFIN 2019 2
1. Unpack the Arch,
screws & the Dropouts
2. Add the washers to the
screws
3. Check orientation
of dropouts and
screws to arch
4. Whilst pushing
upwards, tighten the
four screws to 5Nm
5 Nm
4 PLACES
Step 2a –Attach top stay to arch
Tailfin 2019 Assembly Instructions © TAILFIN 2019 3
1. Unpack the top stay and the arch 3. Gently separate the top
stay and work it carefully
over the upper arch pivots
2. Ensure the lock rings
are rotated up, and out
of the way
Step 2b –Attach top stay to arch
Tailfin 2019 Assembly Instructions © TAILFIN 2019 4
4. Make sure the top stay is fully on 5. Using a flat head of a screw
driver, press the locking rings down,
until they lock in position
Ce manuel convient aux modèles suivants
1
Autres manuels Tailfin Accessoires pour vélos
Tailfin
Tailfin AeroPack Manuel utilisateur
Tailfin
Tailfin AP20 Manuel utilisateur
Tailfin
Tailfin UD22L Manuel utilisateur
Tailfin
Tailfin Zip Top Tube Pack Manuel utilisateur
Tailfin
Tailfin Carbon Rack Manuel utilisateur
Tailfin
Tailfin AeroPack Manuel utilisateur
Tailfin
Tailfin Direct X Series Manuel utilisateur
