T4W PIK GUN FOAM Manuel utilisateur
PIK
q
GUN FOAM
OPERATING INSTRUCTIONS
spare parts list
Thoma • Tel./Fax: +48 95 741 11 62 • [email protected] • www.t4w.eu
Art. no. 59317
Thoma • Tel./Fax: +48 95 741 11 62 • [email protected] • www.t4w.eu
2
PIK
q
GUN FOAM
Contents
Safety Instruction:__________________________________ 3
Explanation of the pictograms _______________________ 3
Air Supply _________________________________________ 3
Technical Data: ____________________________________ 4
Operation Procedure _______________________________ 5
Limited Warranty: __________________________________ 7
Thoma • Tel./Fax: +48 95 741 11 62 • [email protected] • www.t4w.eu
3
PIK
q
GUN FOAM
Safety Instruction:
Wear appropriate hearing and eye protection. Use in well ventilated area. Do not exceed 90psi. Do
not use with acidic, flammable or combustible products. “USE ONLY WITH CAR TOOL PRODUCTS.”
Do not point cleaning tool at face or body.
KEEP OUT OF REACH OF CHILDREN.
Explanation of the pictograms
Hearing, eye protection, a dust mask, head and hand protection most be worn. The complete
reading of this manual is recommended in order to familiarize yourself with the functions and
operations of the Foam PIK before using it.
Air Supply
The Foam PIK gun cleaning tool requires a minimum air pressure of 80 to 90psi, constant, for
optimum performance.
DO NOT EXCEED 90psi.
Constant air supply may vary depending on compressor size
and capabilities. Always make sure tank and air lines are free
from oil and water contamination.
Thoma • Tel./Fax: +48 95 741 11 62 • [email protected] • www.t4w.eu
4
PIK
q
GUN FOAM
Technical Data:
Air inlet: ________________________________________________________ 1/4”
Air consumption: ________________________________________________ 140 NL/min
Weight: _________________________________________________________ 0,90 kg
Max. Air Pressure________________________________________________ 6,2bar/90psi
A weighted(Idle) sound power level _______________________________ 80.8 dB (EN-50144-2-7)
A weightted(Full-load) sound power level__________________________ 86.7 dB (EN-50144-2-7)
Liquid Capacity__________________________________________________ 1,000C.C.(1,000ml)
Thoma • Tel./Fax: +48 95 741 11 62 • [email protected] • www.t4w.eu
5
PIK
q
GUN FOAM
1
Turn liquid air valve to upright position to
deliver cleaning solution.
2
(When adding cleaning liquid, please use
one hand to hold on the cap,and the other
hand to hold on the cup, then turn. It will
make spare parts of the gun itself to be
loosen if turning from the T parts of the gun)
3
Turn liquid valve to the horizontal position
after use to release the air inside.
Operation Procedure
Thoma • Tel./Fax: +48 95 741 11 62 • [email protected] • www.t4w.eu
6
PIK
q
GUN FOAM
4
The operation environment temperature: 5 to 50 °C
5
Using neutral liquid: this tool can be used only with water or neutral cleaners.
Spare parts of the tool itself will be affected if using acidic or alkaline liquid.
6
Do not press snow cup during usage; it will cause spare parts damaged and endanger the
operator.
Thoma • Tel./Fax: +48 95 741 11 62 • [email protected] • www.t4w.eu
7
PIK
q
GUN FOAM
Limited Warranty:
1 year limited warranty against manufactured spare part defects. Snow up is not withinwarranty
category. If this tool is not used for its intended purpose or the spare parts of the tool itself are
changed to other brands items, the warranty is invalid automatically.
Please follow below easy maintenance tips to prolong
the life and performance of this tool.
Safety first!
Use appropriate eye and face protection.
1. Avoid excessive air pressure; exceeding air pressure above 90psi.
2. Always use Car Tool brand spare parts.
3. Avoid dropping the gun on the floor; disconnect when not being used.
4. Turn liquid valve to the horizontal position when pausing.
5. Tighten the gun assembly by the jar and lid to avoid stripping of the threads.
6. Work in well ventilated areas, do not use in closed environment.
Thoma • Tel./Fax: +48 95 741 11 62 • [email protected] • www.t4w.eu
8
PIK
q
GUN FOAM
EC DECLARATION OF CONFORMITY
Name and address
Name / Model / Type
Specifications:
Air inlet: 1/4”
A weighted(Idle)
sound power level 80.8 dB (EN-50144-2-7)
` A weighted(Full-load)
sound power level 86.7 dB (EN-50144-2-7)
Air consumption: 140 NL/min
Weight: 0,90 kg
Max. Air Pressure 6,2bar/90psi
Liquid Capacity 1,000C.C.(1,000ml)
PHU Thoma Tomasz Konopa
PL66-300 Międzyrzecz,
Winnica 36
herewith declares that:
are manufactured and tested according to the following standards:
EN 50144-2-7:2003
and are in conformity with the provisions of the Machinery Directive
EN 50144-2-7:2003
and with national implementing legislation.
PIK
q
GUN FOAM
Date and location Signature/ Full name in typing & position
20.08.2013, Międzyrzecz, Poland Tomasz Konopa, Chairman
Thoma • Tel./Fax: +48 95 741 11 62 • [email protected] • www.t4w.eu
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels T4W Outils
