T3 SMOOTH ID Manuel utilisateur
T3 SMOOTH ID
User Guide
Guide de l’utilisateur
Manual del usuario
1" smart straightening and styling iron
Fer plat et à coiffer intelligent de 25 mm
Plancha inteligente para alisado y peinado
de 25 mm
Model No./Node modèle/N.º de modelo
76535, 76536, 76537, 76538, 76539, 77534,
77535, 76535-CAD, 76536-CAD, 76537-CAD,
76538-CAD, 76539-CAD, 77534-CA,
77535-CA
Heat
just got
personal.
2 3
ENGLISH
ENGLISH
IMPORTANT SAFETY
INSTRUCTIONS
KEEP AWAY FROM WATER
Electricity and water are a dangerous
combination and can cause death by
electric shock. Do not allow electrical
cords to come into contact with water
or other liquids.
ELECTRICAL APPLIANCES ARE
ELECTRICALLY LIVE WHEN
PLUGGED IN, EVEN IF TURNED OFF.
To reduce the risk of death by
electric shock:
1. Always unplug the appliance
immediately after using.
2. Do not use while bathing.
3. Do not place or store the appliance
where it can fall or be pulled into a
bath tub or sink.
4. Do not place in or drop into water
or other liquid.
5. If the appliance falls into water,
unplug it immediately. Do not reach
into the water.
READ ALL INSTRUCTIONS
BEFORE USING
When using electrical appliances,
especially when children are present,
basic safety precautions should always
be followed, including the following:
T3Micro.com/MeetSmoothID
Scan for
interactive start-up
4 5
ENGLISH
ENGLISH
IMPORTANT SAFETY
INSTRUCTIONS
To reduce the risk of burns,
electrocution, fire or injury
to persons:
1. An appliance should never be left
unattended when plugged in.
2. Close supervision is necessary
when this appliance is used on, or
near children or individuals with
certain disabilities.
3. Use this appliance only for its
intended use as described in this
manual. Do not use attachments
not recommended by
the manufacturer.
4. Never operate this appliance if
it has a damaged cord or plug, if
it is not working properly, or if it
has been dropped, damaged, or
dropped into water. Return the
appliance to a service center for
examination and repair.
5. Keep the cord away from heated
surfaces. Do not wrap the cord
around the appliance.
6. Never use while sleeping.
7. Never insert any object into
the styling iron.
8. Do not use outdoors or operate
where aerosol (spray) products are
being used or where oxygen is
being administered.
9. Do not use an extension cord
with this appliance.
10.This styling iron is hot when in use.
Do not let eyes and bare skin touch
the heated surfaces.
11. Do not place the heated styling iron
directly on any surface while it is
hot or plugged in.
12. Do not use if the plug is loose in the
outlet, as there may be risk of fire,
electric shock, electrical shortage
and burning.
13. Make sure to remove the plug from
the wall outlet after use.
Do not use the appliance
near a bath tub,
washbasin or other vessel
filled with water. Never
place the appliance in
water or any other liquid.
SAVE THESE
INSTRUCTIONS
IMPORTANT SAFETY
INSTRUCTIONS
6 7
ENGLISH
ENGLISH
MAINTENANCE
INSTRUCTIONS
1. Your appliance is virtually
maintenance free. It contains no user
serviceable parts, and no lubrication
is needed.
2. Keep heated surfaces clean and free
of dust, dirt & hairspray.
3. If cleaning becomes necessary,
disconnect the appliance from the
power source and let it cool. Wipe
the exterior with a damp cloth.
4. If any malfunction occurs, unplug the
appliance, allow it to cool and return
it to a service center to repair.
5. Never wrap the cord around the
appliance since this will cause the
cord to wear prematurely and break.
If the cord becomes twisted, untwist
it prior to use.
6. Handle the cord carefully for longer
life and do not put any stress on
the cord where it enters the handle.
Avoid jerking, twisting or straining
especially at the plug connections.
It could cause the cord to fray and
possibly break.
7. Do not attempt to repair the
appliance yourself.
STORAGE
When not in use, your styling iron
should be disconnected and stored
in a safe, dry location, out of reach of
children. Do not wrap the cord around
the styling iron. Allow the cord to hang
or lie loose and straight at the point of
entry into the styling iron.
SERVICING OF
DOUBLE-INSULATED APPLIANCES
In a double-insulated appliance, two
systems of insulation are provided
instead of grounding. No grounding
means is provided on a double-
insulated appliance, nor should a
means for grounding be added to
the appliance.
Servicing a double-insulated appliance
requires extreme care and knowledge
of the system, and should be done
only by qualified service personnel.
Replacement parts for double-
insulated appliance must be identical
to the parts they replace. A double-
insulated appliance is marked with
the words “DOUBLE INSULATION” or
“DOUBLE INSULATED”. The symbol
(square within a square) may also be
marked on the appliance.
MAINTENANCE
INSTRUCTIONS
Do not let the heated
plates touch your skin
as you may get burnt.
Ion
Generator
Temperature
Panel
HeatID Inputs
Refresh Mode
Main Body
Heating
Plate
PrecisionControl
Hinge Power
Button
Cord
Plug
8 9
ENGLISH
ENGLISH
This appliance is intended for
household use. Use on Alternating
Current (60/50Hz) only.
This appliance has a polarized plug
(one blade is wider than the other).
As a safety feature, this plug will fit in
a polarized outlet only one way. If the
plug does not fit fully in the outlet,
reverse the plug. If it still does not fit,
contact a qualified electrician. Do not
attempt to defeat this safety feature.
AUTO SHUT-OFF
After approximately one hour, the unit
will automatically shut itself off. To
reactivate the unit, press and hold the
lit Power Button until the iron vibrates,
and lights start to cascade up.
AUTO WORLD VOLTAGE
This appliance contains a special
electronic circuit that automatically
converts it for worldwide usage - from
120VAC 60 Hz to 240VAC 50 Hz. Just
plug it into the local power outlet
and use it as normal; the styler will
automatically adjust to the local
current. You may need a plug
adapter to allow the plug to fit into
the local outlets.
Note: Tool heat up time may vary
based on country and voltage.
OPERATING
INSTRUCTIONS
T3 SMOOTH ID
OPERATING
INSTRUCTIONS
T3 SMOOTH ID
HeatID Inputs
Touch Screen
9 heat settings
Hair Texture
Hair Length
Color Treatment
Refresh Mode Button
Power Button
10 11
ENGLISH
ENGLISH
OPERATING
INSTRUCTIONS
T3 SMOOTH ID
Note: To prevent
accidental activation,
avoid touching Power
Button during styling.
OPERATING
INSTRUCTIONS
T3 SMOOTH ID
TURN ON
Connect the styling iron to a power source.
The Power Button will light up.
To turn on, press and hold the lit Power Button
until the tool vibrates, and lights start to
cascade up. The styling iron will automatically
start in HeatID mode. The screen will be
unlocked and the HeatID icons will light up
and blink for you to input your hair profile. See
page 13 to set your hair profile.
Note:
• Do not touch the area above the power
button when turning the iron ON or OFF.
• The screen will be unlocked the very first
time you turn on the iron.
SWITCHING BETWEEN HeatID
AND MANUAL MODE
If you prefer to manually select your
temperature, you can switch to Manual Mode.
See page 17 for operation in Manual Mode.
12 13
ENGLISH
ENGLISH
OPERATING
INSTRUCTIONS
T3 SMOOTH ID
LOCK/UNLOCK SCREEN
Double tap the Power Button to lock and
unlock the screen. You will hear a locking
sound to indicate lock and unlock.
Note: Screen must be locked to
begin heat up.
IDENTIFYING A
LOCKED/UNLOCKED SCREEN
Locked: Screen is inactive, thus you cannot
change settings if locked.
Unlocked: Screen is active, thus you can
change settings if unlocked.
TURN OFF
To turn off, first unlock the tool by quickly
double tapping the Power Button. Then
press and hold the Power Button until the
iron vibrates and the lights start to cascade
down. The Power Button will remain on until
unplugged.
Note:
• Do not touch the area above the Power
Button when turning the iron ON or
OFF.
• On second time use, the iron will imme-
diately begin heat up to your previous
heat setting. To adjust settings follow
instructions on page 14.
HeatID MODE
Enter your hair texture, length, and color
treatment inputs, and T3 Smooth ID will
automatically tailor your heat setting to help
protect against heat damage and deliver
one-pass results.
OPERATING
INSTRUCTIONS
T3 SMOOTH ID
IDENTIFYING YOUR HAIR PROFILE
TEXTURE
Run one hair strand between your fingers.
Can you barely feel and see the strand?
Select Fine hair texture.
Can you feel the strand, but it does
not feel very thick and textured?
Select Medium hair texture.
Does the strand feel and look thick and
textured? Select Coarse hair texture.
Note: If still unsure about your hair texture,
select the Medium hair texture. You may
need to manually adjust heat as necessary.
LENGTH
Is your hair length above the chin?
Select Short hair length
Is your hair neck to shoulder-length?
Select Medium hair length
Is your hair below the shoulder?
Select Long hair length
COLOR TREATMENT
If you answer yes to any of these questions,
select the Color Treatment option.
Is your hair 3 or 4 shades lighter or darker
than your natural color?
Is your hair fragile?
Is your hair damaged?
Is your hair bleached?
Is your hair chemically-treated?
14 15
ENGLISH
ENGLISH
SELECT YOUR HeatID PROFILE
The HeatID icons will be blinking on first
time use. Tap through each icon to select
desired hair profile input.
Icons will stop blinking upon first tap and
your selection will become brighter as you
continue to tap.
Fine Medium Coarse
1SELECT HAIR TEXTURE
Short Medium Long
2SELECT HAIR LENGTH
Color-treated Not color-treated
3SELECT COLOR TREATMENT
OPERATING
INSTRUCTIONS
T3 SMOOTH ID
5READY TO USE
Once the styling iron beeps and the
lights turn solid, it has reached your
HeatID setting and is ready to use.
4LOCK YOUR HeatID PROFILE
Double tap the Power Button to lock in
your HeatID profile. The temperature
lights will cascade up to your
personalized heat setting and the iron
will begin to heat up.
1If you experience
accidental activation
• Keep your hand away from the
Power Button to avoid unintended
interface activation during styling.
If interface is not responsive
• Ensure you are only touching a
single area of the interface at a time.
If contact is made with more than
one area at the same time, the tool
may not respond.
• Ensure the screen is unlocked. To
unlock screen, quickly double tap the
Power Button.
• If tool is still unresponsive, unplug,
wait 15 seconds, and plug in again.
If power button is not visible
• Ensure the tool is plugged in.
• If tool is plugged in, unplug, wait 15
seconds, and plug in again.
If your tool won’t turn on
• Ensure you are holding the Power
Button for a full 3 seconds.
• Avoid touching surface area
above Power Button while turning
on the tool.
• If tool still will not turn on, unplug,
wait 15 seconds, and plug in again.
2
3
4
TROUBLESHOOTING
OPERATING
INSTRUCTIONS
T3 SMOOTH ID
If you continue to experience issues after trouble
shooting your T3 Smooth ID, please contact
customer service at T3Micro.com/contact-us.
16 17
ENGLISH
ENGLISH
OPERATING
INSTRUCTIONS
T3 SMOOTH ID
Use iron with caution, and select
settings with caution. There are
individual variations in how hair
responds to heat. The optimal
selection of settings may vary from
person to person. In the first use, it
is best to test at a low heat and for
a short duration. If there are any
adverse or unexpected effects, stop
use of the iron immediately.
MANUAL MODE
You can manually select or adjust your heat
settings using the Manual Mode.
OPERATING
INSTRUCTIONS
T3 SMOOTH ID
SWITCH TO MANUAL MODE
If first time use:
Tap the Power Button once after turning on
the tool. You will hear a beep. The HeatID
icons will go away and the Temperature
Panel will appear.
If second time use:
The styling iron will immediately begin
heating up to your last used heat setting. To
manually adjust the heat:
2Tap the Power Button one more time
to switch from HeatID to Manual
Mode. You will hear a beep. The
HeatID icons will go away and the
Temperature Panel will appear.
1First unlock the styling iron by quickly
double tapping the Power Button.
You will hear an unlock sound.
18 19
ENGLISH
ENGLISH
OPERATING
INSTRUCTIONS
T3 SMOOTH ID
1SELECT HEAT SETTING
To increase heat: Tap the top of
the Temperature Panel
To decrease the heat: Tap the
bottom of the Temperature Panel
2LOCK YOUR HEAT SETTING
Double tap the Power Button to
lock the screen and T3 Smooth ID
will begin to heat up.
Note: Iron will auto lock after 10
seconds of inactivity.
3READY TO USE
Once the styling iron beeps
and the lights turn solid, the
iron has reached your heat
selection and is ready to use.
OPERATING
INSTRUCTIONS
T3 SMOOTH ID
TEMPERATURE GUIDE
For optimal results, select the right heat
setting for your hair type. See temperature
guide below to determine your heat setting.
We suggest starting at a lower setting and
building your way up as needed.
* If your hair is color-treated or damaged,
reduce temperature by 1-2 heat settings for
optimal results.
— 9 (410ºF / 210ºC)
— 8 (400ºF / 205ºC)
— 7 (390ºF / 199ºC)
— 6 (370ºF / 188ºC)
— 5 (350ºF / 177ºC)
— 4 (325ºF / 163ºC)
— 3 (300ºF / 149ºC)
— 2 (280ºF / 138ºC)
— 1 (260ºF / 127ºC)
Fine — #1-4 Medium — #5-6 Coarse — #7-9
Table des matières
Langues :
Autres manuels T3 Fer à coiffer
T3
T3 SinglePass X Manuel utilisateur
T3
T3 TWIRL 360 Manuel utilisateur
T3
T3 SINGLEPASS LUXE Manuel utilisateur
T3
T3 LUCEA 76520 Manuel utilisateur
T3
T3 LUCEA ID Manuel utilisateur
T3
T3 CONVERTIBLE COLLECTION 76577 Manuel utilisateur
T3
T3 SinglePass X Manuel utilisateur
T3
T3 SINGLEPASS CURL Manuel utilisateur
T3
T3 SINGLEPASS CERAMIC 77570 Manuel utilisateur
T3
T3 CONVERTIBLE COLLECTION 76577 Manuel utilisateur
