System air SUE 250EC Manuel utilisateur

Document in original language | 199495 · 001

Supply Air Unit

SUE

Installation and Operating Instructions GB

199495 | 001

E&OE

Systemair AB reserves the rights to alter their products without notice.

This also applies to products already ordered, as long as it does not affect the previously agreed specifications.

199495 | 001

Contents

1 General information.........................................1

1.1 Notice symbols......................................1

1.1.1 Instruction symbols.....................1

2 Important safety information .............................1

2.1 Personnel .............................................1

2.2 Personal protective equipment..................2

2.3 5 rules of electrical safety ........................2

3 Warranty.......................................................2

4 Delivery, transport, storage ...............................2

5 Description ....................................................4

5.1 Intended use .........................................4

5.2 Incorrect use ........................................4

5.3 Technical data .......................................4

6 Name plate and type key ..................................5

7 Accessories....................................................6

8 Installation.....................................................7

9 Electrical connection ........................................8

9.1 Wiring diagram ......................................8

9.2 Protecting the motor & heater...................8

9.3 Variable-speed fans................................9

10 Commissioning ...............................................9

11 Operation ......................................................9

12 Troubleshooting/maintenance/repair ................ 10

12.1 Troubleshooting................................... 10

12.2 Maintenance....................................... 12

13 Cleaning...................................................... 12

14 Deinstallation/dismantling............................... 13

15 Disposal ...................................................... 13

16 Product fiche SUE .......................................... 13

17 Commissioning Report.................................... 14

18 EU Declaration of conformity............................ 15

General information | 1

1 General information

1.1 Notice symbols

Danger

Direct hazard

Failure to comply with this warning will lead

directly to death or to serious injury.

Caution

Hazard with a low risk

Failure to comply with this warning may lead to

moderate injuries.

Warning

Potential hazard

Failure to comply with this warning may lead to

death or serious injury.

Important

Hazard with risk of damage to objects

Failure to comply with this warning will lead to

damage to objects.

Note:

Useful information and instructions

1.1.1 Instruction symbols

Instruction Instruction with xed sequence

♦Carry out this action 1. Carry out this action 3. (if applicable, further actions)

♦(if applicable, further actions) 2. Carry out this action

2 Important safety information

Planners, plant builders and operators are responsible for the proper assembly and intended use.

♦Read the operating instructions completely and carefully.

♦Keep the operating instructions and other valid documents, such as the circuit diagram or motor instructions, with

the fan. They must always be available at the place of use.

♦Observe and respect local conditions, regulations and laws.

♦Abide by the system-related conditions and requirements of the system manufacturer or plant constructor.

♦Safety elements may not be dismantled, circumvented or deactivated.

♦Only use the fan in a awless condition.

♦Provide generally prescribed electrical and mechanical protective devices.

♦During installation, electrical connection, commissioning, troubleshooting, and maintenance, secure the location and

premises against unauthorised access.

♦Do not circumvent any safety components or put them out of action.

♦Before any work on the fan, test absence of voltage.

Even when the motor is stopped, dangerous voltages may be present on terminals.

♦Keep all the warning signs on the fan complete and in a legible condition.

♦The device is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or

lack of experience and knowledge, unless they have been given supervision or instruction.

♦Do not allow children to play with the device.

2.1 Personnel

The fan may only be used by qualified, instructed and trained personnel. The persons must know the relevant safety di-

rectives in order to recognise and to avoid risks. The individual activities and qualifications can be found in Table 1 Qual-

ifications, page 2.

199495 | 001

2|Warranty

Table 1 Qualifications

Activities Qualifications

Storage, operation, transport, cleaning, disposal Trained personnel (see following note)

Electrical connection, commissioning, electrical

disconnection Electrical expert or matching qualification

Installation, disassembly Fitter or matching qualification

Maintenance Electrical expert or matching

qualification

Fitter or matching

qualification

Repair

Electrical expert or matching

qualification

Fitter or matching

qualification

Smoke extraction fans and EX fans only by agreement with

Systemair.

Note:

The operator is responsible for ensuring that personnel are instructed and have understood the contents of

the operating instructions. If something is unclear, please contact Systemair or its representative.

2.2 Personal protective equipment

♦Wear protective equipment during all work in the vicinity of the fan.

• protective working clothes

• protective working shoes

• protective working gloves

• helmet

• goggles

• hearing protection

2.3 5 rules of electrical safety

1. Disconnect (disconnection of

the electrical system from

live components at all

terminals)

2. Prevent reactivation

3. Test absence of voltage

4. Ground and short-circuit

5. Cover or restrict adjacent live parts

3 Warranty

For the assertion of warranty claims, the products must be correctly connected and operated, and used in accordance

with the data sheets. Further prerequisites are a completed maintenance plan with no gaps and a commissioning re-

port. Systemair will require these in the case of a warranty claim. The commissioning report is a component of this

document. The maintenance plan must be created by the operator, see section 12.2 Maintenance, page 12.

4 Delivery, transport, storage

Safety information

Warning: Risk from rotating fan blades

♦Prevent access by unauthorised persons by safety personnel or access protection.

Warning: Suspended loads

♦Do not walk under suspended loads.

♦Make sure that there is nobody under a suspended load.

Delivery

Each fan leaves our plant in an electrically and mechanically proper condition. We recommend transporting the fan to

the installation site in the original packaging.

Checking delivery

♦Check the packaging and the fan for transport damage. Any findings should be noted on the cargo manifest.

♦Check completeness of the delivery.

199495 | 001

Delivery, transport, storage | 3

Unpacking

When opening the transport packaging, there is a risk of damage from sharp edges, nails, staples, splinters etc.

♦Unpack the fan carefully.

♦Check the fan for obvious transport damage.

♦Only remove the packaging shortly before assembly.

Transport

Safety information

Warning: Electrical or mechanical hazards due to fire, moisture, short circuit or malfunction.

♦Never transport the fan by the connecting wire, terminal box, impeller, protection grille, inlet cone or silencer.

♦In open transport, please make sure that no water can penetrate into the motor or other sensitive parts.

♦We recommend transporting the fan to the installation site in the original packaging.

Caution: If transported without care during loading and unloading, the fan may be damaged.

♦Load and unload the fan carefully.

♦Use hoisting equipment that is suitable for the weight to be hoisted.

♦Observe the transportation arrows on the packaging.

♦Use the fan packaging exclusively as transport protection and not as a lifting aid.

Storage

♦Store the fan in the original packaging in a dry, dust-free location protected against weather.

♦Avoid the effects of extreme heat or cold.

Hazard due to loss of function of the motor bearing

♦Avoid storing for too long (recommendation: max. 1 year).

♦Check that the motor bearing functions properly before installation.

199495 | 001

4|Description

5 Description

5.1 Intended use

• The SUE is intended to provide rooms with pre-heated air.

• The fans are intended for installation in ventilation systems. They can be installed both in duct systems and also with

free suction via a suction-side contact protection grille. Free discharge via a contact protection grille is also possible.

• The fan is suitable for conveying clean air.

5.2 Incorrect use

Incorrect use refers mainly to using the fan in another way to that described. The following examples are incorrect

and hazardous:

• Conveying of explosive and combustible media

• Conveying of aggressive media

• Operation in an explosive atmosphere

• Operation without filter.

• Operation without duct system or protection grille

• Operation with the air connections closed

• Installation outside without weather protection

5.3 Technical data

Max. ambient temperature [°C] 40

Min. ambient temperature [°C] -20

Max. temperature of transported air [°C] 50

Sound pressure [dB] see data sheet, available in our online catalogue

Voltage, current, frequency, enclosure class, weight see name plate of the fan

The motor data can be found on the name plate of the motor, or in the technical documents of the motor

manufacturer.

The data on the name plate of the fan apply to "standard air" according to ISO 5801.

The SUE consists from the following components:

Fan with EC motor, Duct heater, TCA, S-5EC, Filter, TFK Temperature sensor Temperature sensor

Table 2 Dimensions SUE

199495 | 001

Name plate and type key | 5

Possible adjustments

Temperature

TCA

Factory

setting: 20°C

The value can be

adjusted, see manual of

the controller TCA

(attached to the SUE).

Air volume

S-5EC

5 steps-

switch

The air volume can be

adjusted with the 5

steps switch.

6 Name plate and type key

1Type designation 5Insulation class

2Voltage/current/frequency 6Article number/production number/

manufacturing date

3 Input power 7 Certifications

4Enclosure class/fan impeller speed/weight

Table 3 Type key

SUE 250 EC 9kW

Heating Power

9 kW

Motor

Electronically commutated/1 phased or 3 phased

Duct Diameter

Supply Air Unit

199495 | 001

6|Accessories

7 Accessories

Note:

For details of the accessories, please check our online catalog or contact Systemair.

IGC

IGK FK

FFR/FGR

FFR

IGC

SUE

RSK

LDC

SUE Supply Air Unit VK Louvre Shutter FK Fast clamp

IGC Round protection grille FFR Filter cassette RSK Back draft damper

IGK Wall grid FGR Filter cassette SG Protection guard

LDC Silencer

199495 | 001

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels System air Unité de traitement de l'air

System air

System air Topvex TR800 Manuel

System air

System air MONOLIT-B Manuel utilisateur

System air

System air Geniox GO Manuel utilisateur

System air

System air Topvex SR Manuel utilisateur

System air

System air menerga TX Manuel utilisateur

System air

System air HHCompact Series Manuel du propriétaire

System air

System air Villavent Combini EC Instructions d'utilisation et d'installation

System air

System air Topvex SC Guide de dépannage

System air

System air FGT010 Manuel utilisateur

System air

System air SAVE VSC 200 Manuel utilisateur

System air

System air SAVE VSR 200/B Manuel utilisateur

System air

System air Rotovex 2400 EL Manuel d'utilisation

System air

System air Topvex SF02-S12 Guide d'installation

System air

System air FFR 100 Manuel

System air

System air Topvex SX03 Series Instructions d'utilisation et d'installation

System air

System air fantech bathfan Select Fit SF50-80-100 Manuel utilisateur

System air

System air Villavent VX-400 Mode d’emploi

System air

System air Topvex SR03 Manuel utilisateur

System air

System air Topvex 1000 R Manuel

System air

System air Topvex TR09 HWL Manuel utilisateur

System air

System air Geniox Series Manuel utilisateur

System air

System air Villavent VR 400 DCV/B Mode d’emploi

System air

System air VR 300 ECV/B Instructions d'utilisation et d'installation

System air

System air Topvex TR03 Instructions d'utilisation et d'installation

Manuels Unité de traitement de l'air populaires d'autres marques

Klimor

Klimor EVO-S Manuel utilisateur

Salda

Salda SMARTY XP Mode d’emploi

BLAUBERG

BLAUBERG KOMFORT Roto EC S400 Manuel utilisateur

Trenton

Trenton TPLP Series Manuel utilisateur

Kemper

Kemper CleanAirTower Manuel utilisateur

Daikin

Daikin DV PTC 14 Series Manuel utilisateur

Haier

Haier HB2400VA1M20 Manuel utilisateur

Webasto

Webasto BlueCool A-Series Manuel utilisateur

RDZ

RDZ DA 701 Document technique

Carrier

Carrier 39T Dimensions et guide d'installation

Armstrong Air

Armstrong Air BCE5V Series Manuel utilisateur

ActronAir

ActronAir CAY500T Manuel utilisateur

Carrier

Carrier 40MBDAQ Manuel utilisateur

Allied

Allied A93UH1E Manuel utilisateur

Nortek

Nortek B6VMAI Manuel utilisateur

TemperZone

TemperZone Econex Pro OPA 1410RLTM4FPQD Guide de maintenance et de service

RDZ

RDZ WHR 200 Document technique

AAON

AAON H3 Series Manuel du propriétaire