Synergy LCD2U20-011 Manuel utilisateur
User
Manual
2U 20” Rackmount LCD Monitor
LCD2U20-011
Jan 2007
P.1
1. Table Of Content
1. Table of Content P.1
2. Introduction P.2
3. Features P.2
4. Package Contents P.3
5. Optional Accessories P.4
6. Peripheral Products P.4
7. Important Safeguards P.5
8. Dimension Diagram P.6
9. LCD OSD Menu Operation
LCD Membrane Diagram P.7
Main Menu P.7
Sub Menu P.8-11
10. Resolution Settings
For Windows P.12
For Sun Servers P.13
11. Technical Specification P.14
User Manual
Jan 2007
P.2
RP series is a monitor with built in LCD OSD to provide effective assistant for
an administrator to control PC system.
RP series provides cost effective for your limited ITbudget over using CRT and
rack mounting. Also, it will be space saving for your compact environment rack.
2. Introduction
3. Features
● Unique monitor flip up design allows viewing through closed glass door
of cabinet
● Ultrahigh resolution 20” 1600 x 1200 TFT LCD display panel
● Lightweight Aluminium construction – with black anodize finish
● Styled 6mm aluminium front panel
● Side to side wide-angle viewing as CRT monitor.
● Built-in On Screen Display controlled by integral membrane switches
● Standard D-sub 15-pin VGAinput connector
● Lower power consumption
Disclaimer
This information is subject to change without notice. The producer of this manual accepts no
responsibility for damage or claims, resulting from misuse or misinterpretation
User Manual
Jan 2007
P.3
4. Package Contents
Before Unpacking
It is very important to locate the LCD Monitor in a suitable environment.
● The surface for placing and fixing the LCD Monitor should be stable and level or mounted
into a suitable cabinet.
● Make sure the place has good ventilation, is out of direct sunlight, away from sources of
excessive dust, dirt, heat, water, moisture and vibration.
● Convenience for connecting the LCD Monitor to the related facilities should be well
considers too.
Unpacking
The LCD Monitor comes with the standard parts shown as above. Check and make sure they
are included and in good condition. If anything is missing, or damage, contact the supplier
immediately.
LCD Monitor 1 Piece
User Manual 1 Piece
DC Power Adapter 1 Piece
Power Cord 1 Piece
VGA cable (6 feet) 1 Piece
User Manual
Jan 2007
P.4
5. Optional Accessories
● Video Input
● 24V / 48V DC Power Supply
6. Peripheral Products
Model Description
LCDK1002 / LCDK1016 1U Rackmount Industrial Keyboard Drawer
LCDK1009 1U 4-Port PS/2 KVM Switch
LCDK1010 1U 8-port PS/2 KVM Switch
LCDK1011 1U 16-port PS/2 KVM Switch
LCDK1019 CAT.5 PS/2 KVM Extender
User Manual
Jan 2007
P.5
Please read all of these instructions carefully before you use the device.
Save this manual for future reference.
● Unplug the LCD Monitor from the power outlet before cleaning.
● Do not spray liquid cleaners or aerosol directly on the device. Wet a cloth with a
neutral detergent (e.g. clean water) and squeeze it tight, then clean the screen
slightly with it.
● Do not expose the LCD Monitor directly to rain, water, moisture or sunlight.
● Avoid pressure on the LCD screen to prevent permanent damage to the display.
● Do not attempt to service the device yourself. Improper operation may void your
warranty. Refer all servicing to qualified service personnel.
● Safe storage environment of the LCD Monitor is ranging between –20oC and 60oC.
Permanent damage could occur if the LCD Monitor is stored outside the safe
range.
● Unplug the LCD Monitor immediately and call qualified service personnel under
the following conditions:
1. The VGA signal cord is frayed or damaged.
2. If the monitor has been exposed to rain, liquid or water.
3. If the monitor has been dropped or the casing has been damaged.
What the warranty does not cover
1. Any product, on which the serial number has been defaced, modified or removed.
2. Damage, deterioration or malfunction resulting from:
a) Accident, misuse, neglect, fire, water, lightning, or other acts of nature,
unauthorized product modification, or failure to follow instructions supplied
with the product.
b) Repair or attempted repair by anyone not authorized by us.
c) Any damage of the product due to shipment.
d) Removal or installation of the product.
e) Causes external to the product, such as electric power fluctuation or failure.
f) Use of supplies or parts not meeting our specifications.
g) Normal wear and tear.
h) Any other causes which does not relate to a product defect.
3. Removal, installation, and set-up service charges.
7. Important
Safeguards
User Manual
Jan 2007
LCD2U20-011 2U 20” LCD Monitor
8. Dimension Diagram
600
600
20” LCD
P.6
2U
2U
User Manual
Jan 2007
P.7
9. LCD OSD Menu Operation
LCD Membrane Diagram
Left Right Auto Config
Menu/SelectionPower
Main Menu
Image
● To enter into the Brightness, Contrast, Sharpness, Saturation, Hue sub-
menu
Geometry
● To enter into Auto Conflg., H. Position, V. Position, Clock, phase sub-menu
Function
● To enter into the OSD Position, OSD Zoom and Color Temp. sub-menu
System
● To enter into the Language, Time, Power OFF and Reset sub-menu.
User Manual
Jan 2007
9. LCD OSD Menu Operation
Image
Brightness
To adjust brightness level of the input signal
Use the Tbutton to select the function, then use W/Xbutton to adjust from 0-100
Contrast
To adjust the contrast level of the input signal
Use the Tbutton to select the function, then use W/Xbutton to adjust from 0-100
Sharpness
To adjust the sharpness level of the input signal
Use the Tbutton to select the function, then use W/X’button to adjust from 0-35
Saturation
To adjust the saturation level of the input signal
Use the Tbutton to select the function, then use W/X’button to adjust from 0-100
Hue
To adjust the Hue level of the input signal
Use the Tbutton to select the function, then use W/Xbutton to adjust from (–19)-0-(+19)
P.8
User Manual
Table des matières
