Symantec GHOST IMAGING FOUNDATION 7.1 - V1.0 Manuel utilisateur

Symantec™Ghost Imaging

Foundation

7.1

Symantec™Ghost Imaging Foundation

The software described in this book is furnished under a license agreement and may be used

only in accordance with the terms of the agreement.

Documentation version 7.0

Legal Notice

Symantec, the Symantec Logo are trademarks or registered trademarks of Symantec

Corporation or its affiliates in the U.S. and other countries. Other names may be trademarks

of their respective owners.

The product described in this document is distributed under licenses restricting its use,

copying, distribution, and decompilation/reverse engineering. No part of this document

may be reproduced in any form by any means without prior written authorization of

Symantec Corporation and its licensors, if any.

THE DOCUMENTATION IS PROVIDED "AS IS" AND ALL EXPRESS OR IMPLIED CONDITIONS,

REPRESENTATIONS AND WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF

MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT,

ARE DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TO

BE LEGALLY INVALID. SYMANTEC CORPORATION SHALL NOT BE LIABLE FOR INCIDENTAL

OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH THE FURNISHING,

PERFORMANCE, OR USE OF THIS DOCUMENTATION. THE INFORMATION CONTAINED

IN THIS DOCUMENTATION IS SUBJECT TO CHANGE WITHOUT NOTICE.

The Licensed Software and Documentation are deemed to be commercial computer software

as defined in FAR 12.212 and subject to restricted rights as defined in FAR Section 52.227-19

"Commercial Computer Software - Restricted Rights" and DFARS 227.7202, "Rights in

Commercial Computer Software or Commercial Computer Software Documentation", as

applicable, and any successor regulations. Any use, modification, reproduction release,

performance, display or disclosure of the Licensed Software and Documentation by the U.S.

Government shall be solely in accordance with the terms of this Agreement.

Symantec Corporation

20330 Stevens Creek Blvd.

Cupertino, CA 95014

http://www.symantec.com

Technical Support

Symantec Technical Support maintains support centers globally. Technical

Support’s primary role is to respond to specific queries about product features

and functionality. The Technical Support group also creates content for our online

Knowledge Base. The Technical Support group works collaboratively with the

other functional areas within Symantec to answer your questions in a timely

fashion. For example, the Technical Support group works with Product Engineering

and Symantec Security Response to provide alerting services and virus definition

updates.

Symantec’s maintenance offerings include the following:

■A range of support options that give you the flexibility to select the right

amount of service for any size organization

■Telephone and Web-based support that provides rapid response and

up-to-the-minute information

■Upgrade assurance that delivers automatic software upgrade protection

■Global support that is available 24 hours a day, 7 days a week

■Advanced features, including Account Management Services

For information about Symantec’s Maintenance Programs, you can visit our Web

site at the following URL:

www.symantec.com/techsupp/

Contacting Technical Support

Customers with a current maintenance agreement may access Technical Support

information at the following URL:

www.symantec.com/techsupp/

Before contacting Technical Support, make sure you have satisfied the system

requirements that are listed in your product documentation. Also, you should be

at the computer on which the problem occurred, in case it is necessary to replicate

the problem.

When you contact Technical Support, please have the following information

available:

■Product release level

■Hardware information

■Available memory, disk space, and NIC information

■Operating system

■Version and patch level

■Network topology

■Router, gateway, and IP address information

■Problem description:

■Error messages and log files

■Troubleshooting that was performed before contacting Symantec

■Recent software configuration changes and network changes

Licensing and registration

If your Symantec product requires registration or a license key, access our technical

support Web page at the following URL:

www.symantec.com/techsupp/

Customer service

Customer service information is available at the following URL:

www.symantec.com/techsupp/

Customer Service is available to assist with the following types of issues:

■Questions regarding product licensing or serialization

■Product registration updates, such as address or name changes

■General product information (features, language availability, local dealers)

■Latest information about product updates and upgrades

■Information about upgrade assurance and maintenance contracts

■Information about the Symantec Buying Programs

■Advice about Symantec's technical support options

■Nontechnical presales questions

■Issues that are related to CD-ROMs or manuals

Maintenance agreement resources

If you want to contact Symantec regarding an existing maintenance agreement,

please contact the maintenance agreement administration team for your region

as follows:

[email protected]Asia-Pacific and Japan

[email protected]Europe, Middle-East, and Africa

[email protected]North America and Latin America

Additional enterprise services

Symantec offers a comprehensive set of services that allow you to maximize your

investment in Symantec products and to develop your knowledge, expertise, and

global insight, which enable you to manage your business risks proactively.

Enterprise services that are available include the following:

These solutions provide early warning of cyber attacks, comprehensive threat

analysis, and countermeasures to prevent attacks before they occur.

Symantec Early Warning Solutions

These services remove the burden of managing and monitoring security devices

and events, ensuring rapid response to real threats.

Managed Security Services

Symantec Consulting Services provide on-site technical expertise from

Symantec and its trusted partners. Symantec Consulting Services offer a variety

of prepackaged and customizable options that include assessment, design,

implementation, monitoring, and management capabilities. Each is focused on

establishing and maintaining the integrity and availability of your IT resources.

Consulting Services

Educational Services provide a full array of technical training, security

education, security certification, and awareness communication programs.

Educational Services

To access more information about Enterprise services, please visit our Web site

at the following URL:

www.symantec.com

Select your country or language from the site index.

Technical Support ............................................................................................... 4

Chapter 1 Using Symantec Ghost as a stand-alone

program ........................................................................... 13

About Ghost.exe .......................................................................... 13

Using Ghost.exe on a stand-alone computer ...................................... 14

Starting Ghost.exe ........................................................................ 15

Using Ghost.exe with a mapped network drive ................................... 15

Establishing a peer-to-peer connection with Ghost.exe ........................ 16

About splitting images in a peer-to-peer operation ....................... 19

Creating a backup image file .......................................................... 19

Backing up a hard disk to an image file ....................................... 19

Backing up a partition to an image file ....................................... 21

Restoring from an image file .......................................................... 23

Restoring a hard disk from an image file .................................... 23

Restoring a partition from an image file ..................................... 25

Cloning disks and partitions ........................................................... 26

Cloning disk to disk ................................................................ 27

Cloning partition to partition ................................................... 28

Verifying integrity ....................................................................... 30

Adding switches to your Ghost.exe operation .................................... 30

Running Ghost32.exe in Windows ................................................... 31

Compatibility with Ghost.exe ................................................... 32

Chapter 2 Symantec Ghost support for image files and

disks ................................................................................. 33

About Symantec Ghost image files .................................................. 33

Image files and compression .......................................................... 34

Performance on a network ....................................................... 34

Image files and CRC32 .................................................................. 35

Image files and volume spanning .................................................... 36

Limitations on the image file size .............................................. 36

Size-limited image files ........................................................... 36

Spanned image files ................................................................ 36

Spanning across multiple volumes and limiting span sizes ............ 37

Contents

Restoring from a spanned image ............................................... 38

Image files and tape drives ............................................................. 38

Drives with BitLocker Drive Encryption ........................................... 39

Dynamic disks in Windows Vista/XP/2003/2000 ................................ 39

Support for Disk Drive Overlays (DDO) ............................................. 40

Hibernation and swap files ............................................................. 41

Backing up or migrating a server ..................................................... 42

Resolving SID and configuration issues ...................................... 42

Chapter 3 Modifying image file contents with Ghost

Explorer ........................................................................... 43

Using Ghost Explorer .................................................................... 43

Viewing image files and their properties ........................................... 44

Launching a file ........................................................................... 45

Extracting a file or directory from an image file ................................. 46

Modifying image files ................................................................... 46

Listing the contents of an image file ................................................ 47

About image file spans .................................................................. 47

Setting the default split options ...................................................... 48

Compiling an image file ................................................................. 48

Using Ghost Explorer from the command line ................................... 49

Using Ghost Explorer with long file names ................................. 50

Chapter 4 Running DeployAnywhere from the command

line .................................................................................... 51

Running DeployAnywhere from the command line ............................. 51

Evaluating the target volume ................................................... 52

Retargeting the image ............................................................. 53

Adding new drivers to the Ghost Deploy Anywhere driver

database ............................................................................... 53

Chapter 5 Managing partitions using GDisk ..................................... 55

About GDisk ................................................................................ 55

Running GDisk ...................................................................... 56

Overview of the main command-line switches ................................... 57

Online Help for command-line switches ..................................... 58

Switches common to all GDisk commands .................................. 58

Creating a partition ...................................................................... 61

Reinitializing the Master Boot Record .............................................. 63

Reinitializing GPT disks ................................................................ 64

Showing information about disks .................................................... 64

Contents8

Performing multiple GDisk operations using batch mode .................... 65

Deleting and wiping your disk ........................................................ 66

Wiping Host Protected Areas (HPA)/PARTIES ............................. 69

Confirming a disk wipe ............................................................ 70

Activating or deactivating a partition .............................................. 71

Hiding or unhiding a partition ........................................................ 71

Modifying the Windows 2000/XP boot menu ..................................... 72

Specifying the boot.ini path and file name .................................. 73

Displaying the list of current boot entries ................................... 73

Adding an entry to boot.ini ...................................................... 73

Removing an entry from boot.ini ............................................... 76

Setting the default boot option and timeout ................................ 76

Support for large hard-disks .......................................................... 76

Chapter 6 Manipulating files and directories using

OmniFS ............................................................................ 79

About OmniFS ............................................................................. 79

OmniFS operating environments .................................................... 80

Using OmniFS ............................................................................. 80

Access method switches .......................................................... 81

Accessing files and folders with names that contain spaces ............ 83

Listing drive identifiers ........................................................... 83

OmniFS operations ....................................................................... 84

Setting the attribute for a file ................................................... 84

Copying files and directories .................................................... 85

Renaming files and folders ....................................................... 85

Deleting a file ........................................................................ 86

Deleting a folder .................................................................... 86

Listing a folder ...................................................................... 86

Listing all volumes on a computer ............................................. 86

Listing the commands ............................................................. 87

Displaying the OmniFS version and copyright ............................. 87

Creating a directory ................................................................ 87

Using OmniFS to recover files ........................................................ 87

Using a script file ......................................................................... 89

OmniFS scenarios ........................................................................ 90

Using OmniFS from the command line ....................................... 90

Using OmniFS with a script file ................................................ 90

Using OmniFS with a batch file ................................................. 90

OmniFS error handling ................................................................. 91

Correcting the date and time .......................................................... 91

9Contents

Chapter 7 Editing registry keys and values using

GhRegEdit ....................................................................... 93

About GhRegEdit ......................................................................... 93

Using GhRegEdit .......................................................................... 94

Chapter 8 Using GhostCasting to create and restore

images ............................................................................ 101

About GhostCasting .................................................................... 101

Splitting images in a GhostCast operation ................................. 102

Preparing for GhostCasting .......................................................... 103

About creating the model computer ......................................... 103

Creating a GhostCast Server ......................................................... 103

Starting a GhostCast session ........................................................ 104

Creating an image file ................................................................. 105

Connecting a computer to a session ......................................... 105

Restoring an image file onto client computers ................................. 106

Controlling the GhostCast session from the server ............................ 108

Setting Auto Start parameters ...................................................... 111

Setting the data transfer mode ...................................................... 111

Controlling the amount of network bandwidth used .......................... 113

Viewing and changing GhostCast Server session options ................... 114

Running Ghost.exe on a client computer ......................................... 115

Chapter 9 GhostCasting from the command line .......................... 117

About running GhostCast Server from the command line ................... 117

Starting the GhostCast session ...................................................... 118

GhostCast Server command-line options ........................................ 118

Command-line option examples using GhostCast Server .............. 119

Chapter 10 GhostCasting and IP addresses ...................................... 123

About IP addresses for GhostCasting .............................................. 123

Locally specified IP addresses ....................................................... 123

Examples of Wattcp.cfg client configuration files ....................... 124

About using BOOTP/DHCP to assign IP addresses ............................. 124

BOOTP/DHCP automatically defined IP address ......................... 124

Appendix A GDisk disk-wipe specifications ....................................... 125

About GDisk disk-wipe specifications ............................................. 125

Clearing, sanitizing, and viewing hard disks .................................... 125

About completeness of coverage .................................................... 127

Contents10

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Symantec Logiciel

Symantec

Symantec Fax Sharing Manuel utilisateur

Symantec

Symantec 10097944 - 10PK NORTON ANTIVIRUS 2004 Manuel utilisateur

Symantec

Symantec 10547829 - Mail Security For Smtp 5.0 Smb Manuel utilisateur

Symantec

Symantec 14541094 - pcAnywhere Host & Remote Manuel de service

Symantec

Symantec 64203 - Norton Internet Security 4.0 Manuel utilisateur

Symantec

Symantec PCANYWHERE - V 12.0 AUTOMATION GUIDE Manuel utilisateur

Symantec

Symantec PCANYWHERE - V12.5 Manuel de service

Symantec

Symantec ALTIRIS INVENTORY 7.0 SP2 - FOR NETWORK DEVICES... Manuel utilisateur

Symantec

Symantec ALTIRIS CLIENT MANAGEMENT SUITE 7.0 SP2 -... Manuel utilisateur

Symantec

Symantec 20032623 - Endpoint Protection Small Business... Manuel utilisateur

Symantec

Symantec WISE VIRTUAL PACKAGE EDITOR 8.0 - REFERENCE FOR WISE PACKAGE STUDIO... Manuel de service

Symantec

Symantec 10551441 - AntiVirus Corporate Edition Manuel utilisateur

Symantec

Symantec ALTIRIS DEPLOYMENT SOLUTION 7.1 - V1 Manuel utilisateur

Symantec

Symantec 10551441 - AntiVirus Corporate Edition Manuel de service

Symantec

Symantec Norton Antispam Personal Firewall and Systemwork - Norton... Manuel utilisateur

Symantec

Symantec WISE MOBILE DEVICE PACKAGE EDITOR 7.0 SP2 - REFERENCE FOR WISE INSTALLATION STUDIO... Manuel de service

Symantec

Symantec XGS-4728F Manuel utilisateur

Symantec

Symantec WISE INSTALLATION EXPRESS 7.0 SP2 - GETTING STARTED GUIDE... Manuel utilisateur

Symantec

Symantec 20096002 - Norton Utilities 14.5 Manuel utilisateur

Symantec

Symantec 14125628 - Norton Internet Security 2009 Manuel utilisateur

Symantec

Symantec ASSET MANAGEMENT SUITE 7.0 Manuel utilisateur

Symantec

Symantec ALTIRIS 7.0 SP2 - MANAGEMENT SOLUTION Manuel utilisateur

Symantec

Symantec PCANYWHERE - V12.1 Manuel de service

Symantec

Symantec ALTIRIS ASSET MANAGEMENT SUITE 7.0 - V1.0 Manuel utilisateur

Manuels Logiciel populaires d'autres marques

COMPRO

COMPRO COMPROFM Manuel utilisateur

Muratec

Muratec OFFICEBRIDGE ONLINE Manuel utilisateur

Oracle

Oracle Contact Center Anywhere 8.1 Manuel utilisateur

Adobe

Adobe 65007312 - Photoshop Lightroom Manuel

Avaya

Avaya NULL One-X for RIM Blackberry Manuel utilisateur

HP ProLiant BL420c Manuel utilisateur

PS Audio

PS Audio PowerPlay Manuel du propriétaire

Brady

Brady LOCKOUT PRO 3.0 Manuel de service

Avaya

Avaya Interaction Center Manuel utilisateur

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Manuel

Novell

Novell GROUPWISE 8 - INTERNET AGENT Manuel utilisateur

Oracle

Oracle Application 9i Manuel utilisateur

Acer

Acer RDM Manuel utilisateur

Canon

Canon Vixia HF21 Manuel utilisateur

Canon

Canon ZR950 Manuel utilisateur

Samsung

Samsung Auto Backup Manuel utilisateur

Polycom

Polycom Vortex EF2201 Instructions d'installation et d'utilisation

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Manuel utilisateur