ELECTRICAL SYSTEM
ELECTRICAL SYSTEM OVERVIEW
TheGOEasyelectricalsystemconsistsofthe4-wireconnector,themain
cable,2LEDambersidemarkerlamps(front),2LEDredsidemarker
lamps(back),2LEDrearstop/tail/turnlightsandalicenseplatelight
located in the tailgate and connected by a waterproof connector.
PREPARING YOUR TOW VEHICLE
Your tow vehicle simply needs to be wired for a standard 4-wire trailer
connection. This is typically done professionally at the time of your
vehicle tow package installation.
MAINTENANCE
Maintenance on the electrical system should include frequent visual
inspections,cleaningandtheoccasionalreplacementoflampbulbs,
should they fail. The lights are very easy to remove and replace and
parts can be purchased through Sylvansport.com. The troubleshooting
section gives more detail on replacing parts.
TROUBLESHOOTING
Q. What If none of my lights work at all?
A: Have a professional check the wiring of the tow vehicle to ensure
it’s working properly. Check to be sure there aren’t any cuts, breaks,
etc in the main cable of the GO Easy. If necessary, take it to an
authorized SylvanSport Service Center.
Q. What If one of my side marker lamps is not working?
A: To remove and replace a side marker lamp, simply unscrew the two
screws with a Phillips head screwdriver. Unplug connector and replace
with new lamp. Replace back into plastic housing and screw it back
onto the rear frame or front mounting bracket.
Q. What If one of my stop/tail/turn lamps is not working?
A: To remove and replace a stop/tail/turn lamp, simply unscrew the three
screws with a Phillips head screwdriver. Unplug connector and replace
with new lamp. Replace back into plastic housing and screw it back
onto the rear frame.
GO EASY RACK SYSTEM
RACK SYSTEM OVERVIEW
The GO Easy comes with a square crossrail/load bar rack system and
isdesignedtoacceptmostmajormanufacturersboat,bikeandstorage
rack systems. The load bar system enables you to attach an almost
innitecombinationofboats,bikes,racks,accessoriesandcomponents
to your GO Easy. The GO Easy frame is designed to be compatible with
mostofthemajorrackmanufacturers(Thule,Yakima,etc.)components.
SylvanSport is an authorized Thule dealer and recommends Thule
components,availableattheSylvanSportstoreonsylvansport.com.
LOADING AND DISCONNECTING RACKS
TheGOEasyracksystemisdesignedtocarrybikes,kayaks,boats,
storageboxes,andmore.Alwaysfollowthemanufacturers’instructions
when attaching various rack accessories from the major rack
manufacturers.Neverexceedcombinedmaximumgrossvehicleweight,
as stated on the trailer VIN placard.
Ifyouhaveanyquestionsregardinginstallation,callusat(828)883-
4292.
MAINTENANCE
Maintenance on the rack system should only require a visual inspection.
Wheninspectingthesystem,checktomakesurethatnoneoftheparts
are damaged or bent and that all the hardware is present and properly
tightened.
TROUBLESHOOTING
Q. Will every manufacturers rack system t on the GO Easy?
A: The GO Easy is built with 2” diameter, steel frame members. This
standard size allows for the t of most manufacturers load bar
susytems, from which you can attach all manufacturers boat, bike
and travel accessories.
Q. If I’m still having trouble with t, who do i contact?
A: Manufacturers websites provide contact information for their
customer service. If you need to contact SylvanSport, please call us
at 828-883-4292
For updated troubleshooting information on the upper
rack system, please check out www.sylvansport.com
15
GO EASY
14
