Sykla One Manuel utilisateur
Model ONE
User Guide
1. Introduction
Congratulations on purchasing the SYKLA Model ONE.
We are confident that you will be happy with the quality
and features of this elegant timepiece.
The Sykla smart watch has the following features:
1. Always ON Technology (Android and iPhone)
2. Handle incoming calls (Android and iPhone)
3. Handle SMS messaging (Android)
4. Notification of SMS (Android)
5. Weather display (Android)
6. Pedometer (Android and iPhone)
7. Heart rate monitor (Android and iPhone)
8. Phone anti-lost (Android)
9. Find phone (Android)
10. Camera remote control (Android)
11. Waterproof
2
Warnings:
The watch is made to function in an ambient
temperature of ~15 to 120 degrees Fahrenheit.
When charging please make sure there is dry
surface, good ventilation and sufficient clearance.
When connecting to the USB port please use the
provided USB cable only.
If you disassemble, reverse engineer or modify the
device in any way it WILL void your warranty.
The device uses a Li-ion battery, which contains
harmful chemicals. User beware.
The battery may burst if handled incorrectly. Please
do not expose the battery to hard knocks,
puncture it, and keep it away from extreme heat or
fire.
To discard the watch, please take the watch to your
3
local recycling or waste management facility for
proper disposal.
Improper removal of watch bands, screws, or back
cover will damage the watch and void the
warranty.
2. In The Box
Sykla Smart Watch
USB cable and wall charger
User Guide
3. Before using the Sykla Smart Watch
Make sure the Smart Watch is fully charged. Please
charge the Smart Watch for 3 hours before use.
4
Smart Watch overview:
Figure 1: Smart Watch Physical Characteristics
Figure 1 shows the location of the physical interfaces:
•1.6” TFT display – display the user interface on
watch, and ALWAYS display the time as a regular
watch in standby state
•USB port – for charging
•Power – long press to switch ON/Off the Smart
Watch. Short press to switch the display On/Off and
5
to change time display image
•MIC and speaker – For voice communication
3.1 Power On/Off
Press and hold the power button 5 seconds to turn on/off
the device.
3.2 Reset the Smart watch
Press power button for over 6 seconds to reset when the
watch is dead.
4A. Getting Started (Android)
The Smart Watch works in tandem with an Android
Smart Phone through Bluetooth. The prerequisites are:
a) The Android version shall be at least 2.2.
b) The smart phone needs to be loaded with the
“SmartWatch” Application package (APK) to
6
interwork with Smart Watch. TheAPK is obtained
by visiting Google Play, download to the smart
phone and install. This is a simple procedure.
c) Procedure to download and install the
“Smartwatch” into the Smart phone.
4.1 Android APK download and installation
Turn on smart watch →Main menu → APP
download→Scan the QR code by phone (Fig.2)→ Visit
the link to download the APK (Fig.3)→Install the APK on
the phone.
7
Fig.2 Fig.3
4.2 Connect Smart Watch with the phone using
Bluetooth.
Settings on your phone→ Click Bluetooth ( Fig.4 ) →
8
Find "Smartwatch" in Bluetooth device list ( Fig.5 ) →
Pair with phone ( Fig.6 ).
9
4B. Getting Started (iPhone)
When connect via Bluetooth to your iPhone the Smart
Watch has some basic and useful functionality like
making and receiving phone calls and use Siri voice
control.
a) Make sure Bluetooth and Visible is enabled on the
Smart Watch.
b) On your iPhone go to Settings > Bluetooth
c) Locate the “SmartWatch” and connect to it
d) The Smart Watch will indicate “Connected”
5. Smart Watch – User interaction and navigation
Navigation:
The Smart watch uses Tap and Swipe for navigation for
going from one menu to another.
10
Table des matières
