Sygic Drive 10s Manuel utilisateur
User guide
© 2014 Sygic, a.s. All rights reserved.
DRIVE 10s
ii User Guide
......................................................................................................... 1
I. Getting Started.......................................................................1
The Navigation Screen ................................................................. 1
Entering an Address ..................................................................... 2
Turn by Turn Navigation .............................................................. 6
Acquiring GPS Position................................................................. 7
II. Planning the Route ...............................................................9
Navigating to a Point of Interest ................................................. 9
Navigating Home ........................................................................12
Navigating to Recent Destinations ...........................................13
Navigating to Favorite Destinations .........................................14
III. Altering the Route .............................................................16
Route Menu ................................................................................. 16
Modifying the Route ...................................................................18
Map Browsing Mode ..................................................................19
Multi-stop route planning.......................................................... 22
IV. Settings ...............................................................................26
Advanced settings .............................................................29
Sygic DRIVE 10s 1
I. Getting Started
The Navigation
Screen
On startup, the application
opens with the Navigation
Screen, showing your position
as a blue arrow. You can zoom
in and out of the map by
tapping the + and –buttons in
the top corners of the screen.
For further functions, enter the
Main menu by tapping the map
area on the Navigation Screen.
2 User Guide
You can scroll between the
menu pages by tapping the
arrow buttons at the bottom of
the screen or by sliding a finger
across the screen.
Entering an Address
To set your destination by
entering its address select
Main menu >
Navigate to… >
Address or Zip code.
Next, you will be asked to select
a Country a City, Street and
House number or Street
crossing. Enter the required
names and numbers.
Alternatively, just enter the first
few letters of the city/street
name to see a list of similar
names.
Sygic DRIVE 10s 3
The list also features
explanatory icons left to the
city/street name:
City
Capital city
City center
Street
Street crossing
Select the desired city/street
from the list.
When finished, a Confirmation
Screen pops up showing the
address entered.
Tap “On Map”to see the exact
location of the address, or tap
“Add to favorites”to store it
among your frequently used
destinations (see
4 User Guide
Navigating to Favorite
Destinations”on page 13).
To set the address shown as
your destination, tap the “Route
Me!”button at the bottom of
the screen.
If you would rather be directed
to a parking lot nearby, tap
“Parking” and select from the
list shown.
To select a different address
altogether, tap the “Back”
button.
If your device can determine your
current position, your route will
be calculated immediately from
that positon. If your current
position cannot be determined,
you will be offered the following
options:
Wait for valid signal
(Recommended)
Your route will be
calculated from your
current position as soon as
a valid GPS signal is
available (see “Acquiring
GPS PositionAcquiring GPS
Position”on page 6).
Last valid position
Your route will be
calculated from your last
known position (i.e. where
you were just before the
device lost GPS signal).
Select from map
Allows you to select any
starting point for the route
calculation.
Sygic DRIVE 10s 5
When route calculation is
complete, the entire route is
displayed on the map (in blue)
with total distance, estimated
time of arrival (ETA), time left to
destination and route
calculation method (Fastest,
Economic, Shortest,
Pedestrian, Bicycle) shown
below the map.
To accept the route and start
turn by turn navigation, tap
“Done”.
For further information on the
route, tap “Details”.
NOTE: By default, the method of route
calculation is set to “Fastest”.
6 User Guide
Turn by Turn
Navigation
The Navigation Screen will show
the map of your surrounding
area with the calculated route
highlighted in blue.
As you approach a junction,
further directions are displayed
to indicate which road to take.
In addition to turn by turn
directions, the Navigation
Screen also provides a range of
further useful information:
1
Next maneuver
2
Distance to next change of
direction
3
Current road/street
4
Distance to destination
5
GPS signal strength
6
Current speed
7
Estimated time of arrival at
destination
8
Current city
9
Lane Assistant
10
Heading to destination
11
Next road/street to take
12
Map zoom in/out
13
Speed camera warning
14
Current speed limit
Sygic DRIVE 10s 7
Acquiring GPS
Position
If there is no GPS signal, the
screen becomes grey. This can
happen under any of the
following conditions:
■
The device is in a tunnel or
at a location where signals
from the GPS satellites are
obstructed by buildings,
trees, electric cables or
other objects.
■
Device system settings or
Product Settings are set
incorrectly.
The information below is not
available on iPhone, Android
and Maemo devices.
The signal strength bars at the
bottom of the screen provide
additional information:
If the colour of the bars or the
GPS port name/number turns
red, re-check the GPS settings.
If the bars are grey, move the
device to an outdoor location
with good visibility of the sky
until the signal is regained and
8 User Guide
the bars become green. Tap the
signal bars or select
Main menu >
GPS
to see more detailed GPS
information.
Once GPS signal is regained turn
by turn navigation resumes
automatically.
Table des matières
